I tried asking this in the other cam degee thread from a few days ago but it got glossed over within that one.
Most of our /6s have solid lifters with adjustable lash. When degreeing a cam with solids do I have to temporarily adjust lash to 0, while degreeing the cam? Cuz otherwise to turn the cam/crank to where you start getting lift it'll put your readings off, while taking up the lash.
Most of our /6s have solid lifters with adjustable lash. When degreeing a cam with solids do I have to temporarily adjust lash to 0, while degreeing the cam? Cuz otherwise to turn the cam/crank to where you start getting lift it'll put your readings off, while taking up the lash.