[SOLD] SBM tunnel ram. Wisconsin

-
Status
Not open for further replies.

Owen 340+6

Bang em till it breaks
Joined
Dec 8, 2019
Messages
1,297
Reaction score
1,903
Location
Bay city wisconsin
Contact seller
Have a wieand tunnel ram. Believe it's from the 80s if I had to guess. Comes with intake and homemade linkage from previous owner. It worked for him I saw it run on his car but linkage definitely is homemade. Carbs not included. Bay city Wisconsin, I can ship. $750. I'll work on shipping with buyer or split it.

IMG_0127.jpg
 

Let get a picture of the drivers side so we can see it better please, you have a good shot of the passenger side everywhere, not the drivers side. That runner on the drivers side almost looks repaired

IMG_20251117_204948437_AE.jpg
 
Then hope there’s enough meat in the runner to port match
Nothing that a MIG spool gun or TIG can't take care of, adding more material. I'm a welding hack but I wouldn't hesitate to undertake a task like that. I'm set up for it with the welders and milling machine. I repair aluminum oil pans for BMW E39 M5s and once the material is clean, filling a void using a copper backing plate is surprisingly straightforward.

Having said that, if you are paying someone $100/hr to do it, it might be a bit expensive in the end. And I'm not going to claim an adapted intake will have the best runner geometry, and hope the intake has enough runner cross sectional area if you need to fully port it. But it should make for a good start.

Sorry for the comments. Just trying to help the seller.
 
Status
Not open for further replies.
-
Back
Top Bottom