3 speed bell housings

-
bcschief

bcschief

Well-Known Member
Joined
Feb 23, 2010
Messages
3,830
Reaction score
4,827
Location
Crescent City Florida
Will a 3spd bell housing from a 74 A body fit a 63 A body with a A903 Transmission trans bolt pattern and clutch linkage ect. This is for a slant 6 Thanks in Advance

Brian
 
Nope. '62-4 only on the bellhousing.
Click to expand...

You sure ? I wonder because I just installed a 1974 A-230 ( full synchro) in my 1963 bellhousing ....

BTW , I have an extra 63 Slant bellhousing if that is all you need . $40.00 shipped .

Steve
 
damraider said:
You sure ? I wonder because I just installed a 1974 A-230 ( full synchro) in my 1963 bellhousing ....

BTW , I have an extra 63 Slant bellhousing if that is all you need . $40.00 shipped .

Steve
Click to expand...
.....................................................................................................
The original question was: will a '74 bell housing fit a '63 A-body trans and clutch linkage. The answer is no. Now you can MAKE it fit if you want to modify stuff but it's not a straight bolt-in. This photo will show the main differences through the years. From left to right....'62-4, '65-6, '67-74, and '75-80. The last two look the same on the linkage mount but the transmission bearing retainer diameter is different.
Thanks, Mark

100_0517.jpg
 
This picture and info should be a sticky or in an arcive somewere. Bought the one from Damraider

Thanks Again
Brian
 
You must log in or register to reply here.
-

Back
Top