I have a stout 450 hp 383 Dart going together. I have 3.23 gears for normal street use and 4.56 gears with slicks for the strip. I need a good clutch without breaking the bank if possible. I have used the Mcleod long style before and that worked out pretty good. What are your suggestions...
I have a fresh 383 going in my 64 Dart. The engine has about 10.5 comp with 440 Source heads that have been blueprinted and stage 1 ported by Muscle Motors. I have an RPM intake with a Biggs 750 carb. The car has a 4.88 Dana with a hemi 4 speed using 30" tall tires.
My question is mainiy to...
Hello, anyone here have an early a that they drive often that has the TTI headers for the early a?
How are the clearances for the tubes after the installation? Do they hit anywhere? I know that they can be a PITA to install but I want to know how they fit after the installation.
Thanks,
Mike
Did all 66 Gt hardtops have the trim go over the roof?
My fender, door, and door window trim have been removed when the car was painted before I got it and I am looking to collect the parts that are missing.
Thanks,
Mike
Just picked up a 1966 Dart for my driver. It is supposed to be a GT but all of the GT trim has been removed if it was. It does have Dart GT on the interior doors.
It is a desert AZ car with zero rust. I don't think that it has been hit either.
It has a 318 with a slip yoke 4 speed with...
Does anyone know where I can get new tail lamp sockets with pig tails?
I need them for my 74 Duster. I am rewiring the can and the sockets just crumbled up inside. Good used ones would work also.
Or does anyone have any decent tail lights for 73-76 Duster. I believe they are all the same...
I am thinking of putting 17" wheels on my Duster. Can anyone who has put these on their Duster or Demon post some pics?
What size width and offsets did you use on the front and the badc.
What size tires did you use?
Did you minitub or is the car stock?
Please post pics if you can...
I need to switch my small block over to the 70 and up water pump and pulley setup. I need everything except a balancer. Can anyone help me, and how much? I am putting an engine setup for an early setup into my Duster and need everything.
Any help will be appreciated. This car is my...
I need to switch my small block over to the 70 and up water pump and pulley setup. I need everything except a balancer. Can anyone help me, and how much? I am putting an engine setup for an early setup into my Duster and need everything.
This car is my driver. It is has Power steering, no...
I bought this carb from Slantsixdan a couple of months ago and it was brand new still bagged up. It has no more than 2 hours of running on it.
Get a new carb for less than a reman. $150 and shipping.
Mike
Headers are painted, not coated. Are in excellent condition. Some of the tubes have oil stains on them. A couple of small clearances. I will try to get some pics up tomorrow. Includes collectors. $450 plus freight.
Will go on Ebay next week.
Let me know,
Mike
Convertor flashes to 3400 then settles down to 3200. Is currently balanced for a 360 and has the adapter ring to fit a late model engine to the pb 904.
Made by a local manufacturer here in Phoenix, AZ. Used for about 1000 miles. It was too much for my mild engine. $200
Mike
I have an California/Arizona rust free 63 Dart shell for sale. Cherry floors and drivers quarter. Pass quarter has no rust but has had some filler from a mishap in front of the wheelwell. The car currently has not doors or fenders. The hood needs a little work, the back corners are bent up a...
I have an AZ 64 Dart 170 I just picked up and I was wondering how I can tell which engine it has.
The guy I picked it up from was not a car guy so I don't know if becaause it was a 170 car he may have assumed that it had that engine. I haven't driven it yet so I don't how well it...
I have a 74 Duster 225 with a broken carb and I am in desparate need for one that works. This car is my driver. If you have one please contact me by email with price.
Thanks,
Mike
[email protected]
I have a new set of Ross pistons for a 400 with a 4.15 crank, 6.76 rods with .990 pins. These are for the pistons only. $500 plus shipping.
Any questions shoot me an email or give me a call. I may consider a part trade for a low deck tunnel ram intake.
-
Mike...