Search results for query: *

I too went with the 26”. Even if you have the small opening I would go with 26” anyway. My car is a 340/A833 so it has the big opening. I believe most manual V8’s, A/C cars, and /6 manual had the big openings. That’s not gospel truth but I think there was a hierarchy like that.

I got my first Stainless sample of the "improved" housing. The integral bulb socket is fantastic! I just need to do some test fitting and finalize the connector overmolding.

Driver’s side small block heat shield. I believe it’s correct for a LA 318, maybe a 273 also? New, Never been installed, but has shelf wear. $100 plus shipping.

I have this 22" ecp. Radiator in my 69 dart 340. I live near phx and in the Summer (today is 109*) It is just enough with a shroud and mechanical clutch fan. If I had to do it again I'd go with their 26" If you have the room bigger is better. Just my opinion. I hope whatever Radiator you go...

Closing thoughts on this: My main issue of massive caster variance i believe to have been cause by poly bush in the lca And blown out strutrod bush. Forcing lower arm back and erasing my caster on one side. As andysauto1 pointed out.. my ball joint was 1/2” more rearward on the side with...

well the project has officially started. now i remember why i bought my mustang. what a pain in the ***. lol. i swear tti headers were way easier to deal with compared to these 340 manifolds. engine is out. I'll pull the trans tomorrow and start on the front end stuff. hopefully I'm...

New info. Risers are heavy duty rivet situation.... Might have to drill em out. Hmmmmmm

I had a driver's side tail light out, searched everywhere and found the problem in the turn signal switch. It had burned out a soldered connection on the internal board that holds the plastic/nylon turn signal cancelling mechanism.

50-under on the crank... Don't often hear of a crank going more than 30-under

Mopar small block Federal style power steering pump. Includes one of the small block mounting brackets, correct vented cap, OEM pulley and both PS hoses as removed from the car it came from. Looks to be very clean inside although I have not personally run it so selling AS-IS. Asking $200 +...

I have to remain silent, although the Chief was running mid 8's in his 383 powered Bantam in the early 2000's. lol

I like this idea. Makes sense.

They probably wrecked it.....very necessary for them to keep that on the down low lol.

Wipe them down with "Grease and Wax Remover", and or "Acetone" before you paint them. Paint them, and set them out in the sun. That's as much baking as you can get without an oven. Dave

...bake them for hours in thermal cycles for correct cure. with the modern paints available i think there are better options, and pricing (have you *seen* the price of VHT lately?!?). if you're not particular about color, appliance epoxy will cure tough as nails. for plain finishes of black...

Del, Good to hear from you. Radio suppression cap is good idea.

:rofl: :rofl: Been there. Sittin' in the right rear window of a Baja Bug when the left front spindle went belly up. It got us home :rofl:

think these are the guys you might be looking for...

For sale is a Accurate exhaust stainless steel tip kit for 2.5" pipes. Includes tips, tip hangers, and clamps. All new never installed. Accurate site says for 68-69 Barracuda/70-73 Dart Swinger. 240.00 plus the ride.

That's crazy to miss the mark by that much, how could that be possible even with a limited knowledge of performance engines.

The risers on there look like they're, what, 3-4" tall? Looks like it would be easy enough to unbolt the risers from the sliders and attach something like 2" angle in place of them, drilled to the original floor holes, and gain yourself a couple inches of headroom. (Borrowed pictures, so...

:lol: Love this.... "Mellow Man" "Hackey-sack that MF-r"

muratic acid has tons of uses-- rust removal, concrete cleaning, etching various things, balancing pool water, etc etc etc. but as mentioned above, it's no joke. treat is as you would any other acid, even at fairly low concentrations it can flume off a grip of the nasty so wear your PPE and...

Thanks for the link. They’re all telling him to stay small block. I’ll not spoil it for you but …:(

Pm sent.

Any trades for a hellcat redeye 69 roadrunner. Obviously I need cash and car

I would cut off and pick a different hole??

Welcome! While you were in Mo., Clay and Son near St. Louis is a great source of needed non repop parts. Next trip maybe!

1968 Nineteen sixty eight impala for sale by owner - Swan, IA - craigslist $10,000