Search results for query: *

  1. G

    [FOR SALE] MISC cleaning

    Hello, Do you have the electrical connector for the voltage regulator?
  2. G

    [FOR SALE] Radiator hose adapter for temp sending unit

    Hello, What size hose does this item fit? It's a little hard to tell from the photos. Thanks
  3. G

    A/C push buttons gasket

    It's felt, about 1/4" thick. I think it would be very difficult to do precision cutting into it.
  4. G

    A/C push buttons gasket

    I've contacted DMT and they do not carry these gaskets.
  5. G

    [WANTED] A/C switch felt gasket

    Hello, It sure looks like it will work. What do you want for it?
  6. G

    [WANTED] A/C switch felt gasket

    I'm looking for the A/C switch felt gasket, see photos. Any help locating one will be greatly appreciated. Thank you
  7. G

    A/C push buttons gasket

    Thanks for the response. I have not seen this listed on their site, but maybe they could make it. I'll contact them next week. Thanks for the idea.
  8. G

    A/C push buttons gasket

    Hey Everyone, I've got a 1966 Dart GT that I'm putting back together and I need a A/C push button switch gasket. See photo. Any help in finding one would be greatly appreciated. Thank you.
  9. G

    Four barrel carburetor for slant 6 Offenhauser manifold?

    I'm sure it will work well. Let me know how it turns out.
  10. G

    Four barrel carburetor for slant 6 Offenhauser manifold?

    I've got the same set-up as you have, but not installed yet. The carb I have is off a 1966 273 v8. Should work great. There is even a Mopar high performance manual for these slant 6's. That manual recommends using one of these carbs from a 1965 to 1967 273 v8 4bbl. It also gives recommendations...
  11. G

    1966 Dart

    Hey Cudamark, Thank you for all that information. I will use the WD-40 tip. Have a great day!
  12. G

    1966 Dart

    Thanks for the response. So what youa re saying is that the trim is screwed down?
  13. G

    1966 Dart

    Hey Guys, I've got a 1966 Dart GT that I'm getting ready to paint and I have a couple of questions. First, how do you remove the GT emblems on the door? Just pry them off? I do not want to break them. Also, how does the chrome trim on the fenders, doors and roof come off? I see some mounting...
  14. G

    [FOR SALE] Working /6 904 transmission.

    Transmission came out of a '66 Dart, with slant 6. Has 49xxx on odometer, pretty sure it's been around at least once. Transmission worked good before I took it out. Shifted fine and no slippage. Transmission, torque converter, flex plate, cooling lines and steering column shift linkage & bolts...
  15. G

    [SOLD] Hurst Competition Plus Shifter

    I just installed one of these shifters on an 833 4 spd, going into a '66 Dart. Here is a p/n for the installation instructions; Hurst Super Shifter Installation Instructions p/n 373 8617. Finding that kit is very difficult, but you can buy the parts Shift Doc and Hurst. Good Luck.
  16. G

    [SOLD] Slant six 2bbl for 1bbl

    So, you are going to continue to look, yes?
  17. G

    [SOLD] Slant six 2bbl for 1bbl

    I've got a stoke intake and carb I'll trade with you.
  18. G

    [SOLD] **REBUILT** Lower Control Arms For All The 1962-76 A Body Line Of Cars.

    Hello, do you have a lower left control arm that has not been rebuilt? I have all the parts to rebuild it, just need a good used control arm. Thanks
  19. G

    [WANTED] slant 6 bell housing

    Good morning to you, That sounds good, unfortunately, I already purchased one. I'm sure you will have no problem selling this. Good luck on the sale. Have a great day.
Back
Top