Search results for query: *

I have for sale a used CVR billet thermostat housing P/N TSH6CL. It is the swivel hose inlet design so can turn any direction based on the upper hose position of the radiator. https://www.summitracing.com/parts/cvs-tsh8cl It’s in perfect condition and has the O-ring design for sealing to the...

I have for sale a very little used ATI SFI certified small block front balancer that came from an internally balanced 360/408 stroker engine. It has 5 passes on it and about 9 dyno pulls. ATI Performance Products ATI917392E ATI Super Damper Standard Harmonic Balancers | Summit Racing The...

I have for sale a used Mini starter from Summit Racing, P/N SUM-820441 that’s in excellent shape. The car was rarely raced so very little time on it. Summit Racing SUM-820441 Summit Racing™ Mini High-Torque Starters | Summit Racing It was bench tested and works perfectly. I am also including...

I have for sale a used engine lift plate from Jeg’s P/N 80044. It’s in excellent shape and comes with the attaching bolts and washers. It can hold up to 1000 lbs. and will bolt to any intake with the square bore or 4500 series carbs. I would like to get $10.00 for everything plus the shipping...

I have for sale a used Moroso #63657 radiator overflow tank. It’s in excellent shape and has no issues. I would like to get $25.00 for it plus the shipping. Ken Edison, NJ

I have for sale a very little used 5-Point, Red, RCI, 3” wide driver restraint system. The belts expired in December 2023 so can’t be used for NHRA racing unless they get recertified. They are RCI P/N 9510B. These belts are in excellent shape with no issues at all. Just the expiration date. I...

I have for sale a used B&M SFI certified flex plate P/N 10230 and fits any big block or small block engine using the 727 trans. There are no issues with this flex plate and it comes with ARP PRO 12-point attaching bolts. https://www.summitracing.com/parts/bmm-10230...

I have for sale a gently use Moroso #64700 aluminum crank pulley that was on a 360 Bracket engine. It has the offset attaching bolt positions (pre 1972), measures 5” overall diameter and 2 ¼” deep. Moroso Cast Aluminum Crankshaft Pulleys 64700 Even though this pulley has the one offset bolt...

I have for sale a set of used OEM 8 ¾ ring and pinion gears for the 741 case. They look to be in excellent shape and just shows some normal wear. The inner pinion bearing shim measures .091” with the case that it came out of so that would be a good starting point for measuring pinion depth. I...

USPS flat rate box goes to all 50 states for the same price. Just sayin'

I have for sale an NOS master cylinder to brake pedal boot and plate from Master Power Brakes. This is a discontinued part but carries P/N H1300. This is still in the original packaging and has never been opened. It fits all A-BODY cars, 65-72 B-BODY cars, all E-BODY cars. (For use on B/E-Body...

I have for sale a used Edelbrock 1411 carb with the electric choke. It’s the 750 cfm model but from what I can see, the primary throttle shaft has a little more than normal play in it as it goes through the main body bores so may need to be bushed. It did run well when it was on the engine but...

That wouldn't be a problem but you are second in line. Ken

SOLD pending receipt of payment. I have for sale a new, still in the original packaging, Mopar Performance P5249609 torsion bar lock ring and boot kit for the 1962-1976 A/B/E body cars. P5249609 - Genuine Mopar Lock Kit-TORSION Bar W/SEAL I would like to get $30.00 for the kit plus the...

I have for sale a set of used main caps that came from a 318 engine. They are all in excellent shape and have been cleaned. The bolts that were used on this engine were a mismatched set so I’m just including the correct ones that I found. The oil pump attaching bolts are also included. These...

I have for sale a set of 8 used Silv-O-lite .060 over, cast pistons P/N 1279 that came from a 360 LA engine using the stock 3.58” stroke. Silvolite S1279-060 Silv-O-Lite Cast Pistons | Summit Racing These pistons are clean and come with the matching pins. Each pin was put back with its...

I have for sale, 4 unused NHRA Division 1 event decals for the August 4-6, 2023 Atco LODRS points race that never happened. The track was sold about 10 days prior to the scheduled event so the race was moved to Maple Grove Raceway that same weekend. I would like to get $8.00 for the 4 decals...

PM sent

I have for sale what looks to be an MSD extension cable with 4 different color wires in a plastic covering for the 7AL ignition box. Red for switched power, Orange for coil +, Black for coil –, and White for points or original ignition amplifier. One end has the end connectors to go connect...

I have for sale 2 autographed John Force 8 1/2 X 11 posters from his 1999 season. Both of these are in pristine condition. One is signed by John Force along with his 2 crew chiefs, Austin Coil and Bernie Fedderly. The second is signed by just Bernie Fedderly. I would like to get $20.00 for both...

Done!

SOLD pending receipt of payment. I have for sale a single used United States Standard (USS) thread restoring die. It is a 5/8”-11 thread and is in excellent shape with no issues at all. The OD of the die is 2” and is just under 5/8” thick. I would like to get $3.00 for it plus the shipping...

I have for sale a used G-Force open face white helmet. It complies with the Snell M2005 and SFI spec 41.1 codes and was manufactured on 1-2008. This helmet is an M size. It is an expired helmet for NHRA drag strip use but can certainly be used for other sports that don’t require specific dates...

Any offers?

I have for sale an excellent pair of used rear SBP, 10 x 1 ¾ brake drums that came from a 69 Barracuda using the 8 3/4" rear axle. These drums were the spares for the car in case they were needed. They have never been cut and just show normal wear. I measured approximately 10” in diameter with...

Your inbox is full. $18.40 via the USPS medium flat rate box.

PM sent

I have for sale a complete, used set of SBP, 10 x 1 ¾ brake drums, shoes with all the attaching hardware along with the backing plates that came from a 69 Barracuda. They are all in excellent shape with the drums never been cut. I would like to get $60.00 for the brake parts everything plus...

I have for sale a pair of gently used aftermarket SBP, 8 ¾, A-body axles from Dutchman. These are the stock length 27 11/16” axles, with ½ x 2” screw in studs, OEM adjustable bearings and stock 30 spline ends. These axles were taken out of a 1969 Barracuda so will fit any of the A-body cars with...

SOLD pending receipt of payment. I have for sale a pair of used vented Kelsey Hayes SBP front rotors (no hubs) that came from a 1969 Barracuda. They are used but in excellent shape and have never been cut. They measure 20.574 mm thick with a 20.06 mm minimum thickness. I would like to get $30...