Search results for query: *

Thank you

Will let you know Monday if not Vans Auto restoration reproduction parts on eBay have some on their site like a case they must have scored from the same guy....same price too...$20/shipped....only 10 left

Every hose I found required the vent bolt hole to be bored out to 9/16 which I did. I did use the 75 Maverick, the later one and it works. Bought the same hose, same manu. from rock for about $9 instead of $35.

Any left?

Life can be an adventure..if you let it. Guy asks why my old cars have NO AC? I tell him, it clutters my engine bay, and IF you have spent a lifetime working outside in the heat, the sun, riding down a road in any old car with the windows down, hearing that engine, with the vent windows...

This might be it or if all else fails, keep the part of the hose just for the vent and use another hose just for the brakes and fasten it to the housing separately.

all that should be the same (i believe) @halifaxhops would be the guy to make sure with..

1968 Dart 318 2 barrel.. I don’t know the history of the car but it was converted to the later model Chrysler electronic ignition at some point in its life. I was gonna do plugs, wires, cap, and rotor.. would I need to buy all that stuff for the later model electronic ignition stuff? Say like...

Rod Hall was a very successful off road racer way back when I was doin' that kinda thing

@JOES4FORTY thank you. This is just what I needed. I saved the images. Ian

IF you say in the ad "If the ad is up, it is still FOR SALE" and then 99%'s first question is the auto "Is it for sale?" :BangHead: :BangHead: :BangHead: :BangHead: :poke: How many ads for $10,000 four doors that will never sell for the $600 it is worth??:rofl::BangHead::BangHead:

ford explorer and ranger both use the 5x4.5" bolt pattern (same as the mopar "big" bolt pattern). so do mustangs, but unless you find one from a fox body (up to 93?), it'll be as wide or wider than the aspen/volare rear end. the center register on a ford is slightly smaller (IIRC it's 2.75"...

Support the "Piston Slap" comments. I built a 383 with forged pistons and set-up "Loose" for street/race application. Had to walk away on initial start-up and drink a cup of coffee. After operating temp no knock. This engine had 40,000 miles befor a tear down inspection. No issues found...

From the dorsal fin back, lotta good eatin' there :p

It’s very likely caused by the locked distributor. Get it hot and twist 20 degrees out of it then try to start it. Probably will spin nice and easy. You’ll need a curve in the distributor or a start retard to fix it.

The funny thing is, for all of the experience DV has, He acted somewhat puzzled when He gave a NAPCAR team a "super atomizing" carb setup He created for a restrictor plate engine......and it lost like 6mph+ or something on that order. Since I've despised the sanctioning body since the early...

No they are 111 as they were also made as 4 doors and need the length for exit / entry.

And here is where marketplace probably has its biggest issue. Because we all are to smart to put our phone number in the ad it has to go through messenger which honestly I hate. If I didn’t buy or sell parts I wouldn’t have it because your Facebook friends use it to send you stupid stuff all day...

Think I'll fix the Grandkids Minibike today. They sure know how to beat the **** out of it. :lol:

If running a carb (i.e. not Fuel Injected), could be leaking float valve or float level set to high. This will allow fuel to fill cylinders and be over rich or slightly hydro locked. 4 cycle engines like to be lean on a hot start.

Nice wheels Randy makes the car look even better.

I know but the price of braided was too much, besides rubber came with the kit plus it’s more flexible.

Bump

Morning, coffee going down good and planning my day out. Think I'll resurrect the grandkids minibike for the 4th time. They sure know how to beat the crap out of it. Not that any of us was hard on things when we were young. :rolleyes:

It's Satellite Saturday! Good morning :D

Thanks for sharing with me. Appreciate the info.

I'd probably be bankrupt if sellers actually responded to half of my inquiries.

??

It’s got me stumped too. Next time I’ve got the car on the rack I’ll pull off one of the convos and slide on a steelie. I went to wheel vintiques web site and they don’t offer a 15x10 any more. Could be due to people getting away from 15’s. As I said I’m not smearing the company just have had...

Timing tape is best for display cabinet. I used crackedbacks method that Rusty posted above.