Search results for query: *

see: Website Help & FAQ

ABSOLUTELY. That is GOOD advice. I have seen many car shows on TV where they clean out mouse mess without masks or gloves. That is not very smart.

Just because something is on YouTube, that doesn't mean it is true. I don't use oil additives, but I certainly would not let one internet video convince me that they were bad.

I get a notification..."you have reached your limit (15) conversations, Question...How do I delete these conversations? I need to start a new one with another forum member. Norm

Yep.

Ouch, pricey.

I think I agree with @GTX JOHN when he says the spacer may not be needed. I have a 69 Barracuda with a 340 built to about 375 HP. It has an Air Gap and an Eddy carb, and I don't have any fuel boiling problems.

Ah, nice.

Honing blocks at 'operating' temps makes SO much sense to me.

That's your garage??? Wow! I'll fly you to Kansas if you'll help me get to looking like that. Seriously, It is VERY nice.

Yeah the transmission will physically bolt up to the engine, but my biggest question/concern is going to be the flywheel/clutch setup as Dion mentioned. Dion, I found your thread yesterday about the idler arm interference. Fortunately I wouldn’t have an issue there since I’m running an HDK in...

$600 shipped in the lower 48.

What is the narrowest 14" wheel I can get in the 4.5 bolt pattern? Thanks in advance.

Only one I know of has a thread on here and swapped the front plate, tail housing and main shaft so he could use an LS (I think) bellhousing. Not really what you are asking. The PS starter will cause issues, idler hits the starter hard. There is a fix, but it isn’t off the shelf. I have a...

I have the same head unit in the Valiant and it sounds really good. It's also insulated with Killmat. The truck is a truck. Old and loud. As for the speakers, they are all I can afford. Feel free to send me a better pair.

Amen to using a long board (sanding block). I probably spend at least 100-200 hours block sanding filler and then high build primer on each and every paint job. I block filler lightly with 120, then 220. Then I spray 3 coats of Evercoat G2 (that's all I use). Then I apply black guide coat and...

The Gen3 hemi and small blocks share the same bellhousing pattern. Does that answer your question? All the other details I don't know, but it should bolt up. You gotta figger out the rest. lol

Member ir3333 I believe has one. He's located in Sterling Ontario Canada and I can't imagine what Shipping would cost ??

Has anyone here put a tr6060 from a Challenger behind a small block? Will the stock bellhousing work (I know the starter is on the passenger side) or will a different bellhousing be needed? Thanks

here's the stuff new: https://www.moparmall.com/Slant-Six-Manifold-Mounting-Hardware-p/325-005.htm if somebody doesn't come up with a set for ya, shoot me a PM. i'm sure i have some, i'll just need to root around a bit for it.

I’ve put 20k trouble free miles on the ax15 in my Duster. Granted, it’s currently behind a bone stock 5.9 magnum.

IMHO you got 40 watts to some entry level speakers. You can’t expect much. Your stereo should sound good with without the subs.

excellent. these 302 heads should work marvelously on this 426 stroker, then.

Okay I will give them a call. Thank you!

Source for "bat wing" washers and conical washers new or used for slant six intake / exhaust manifold. Norm

Yeah Rich. That's a whole story in itself. For some reason they like to drink Heineken beer here. And they like to drink the small 250 ml cans. Or I guess what would be 10 oz cans in America. I asked a few of them about that a while back. Believe it or not they told me they don't get as drunk...

The blacksmith down the dusty trail from me no longer has his door open for business either…..

He said if you are building g a race engine or rebuilding a certain block (like the FE Ford) you should hone with one. If honing at operating temp works for you then go for it. Like he said, If you are freshening up your wife's Yukon LS it's probably not necessary. Pay the extra and have it done...

There are some things on my profile / posts.

Big cubic inches and smaller ports always works for extra torque.