Search results for query: a body 8 3/4

looking for a complete 8 3/4 with posi no junk. thanks. A body only.

This is a mopar 8 3/4 housing that has been narrowed to factory A body specifications. Has new seals, and perches at 43” center to center. Price is $500. Located in San Jose, CA.

Looking for a pair of 8 3/4 backing plates used on small 4" bolt pattern A body 8 3/4. Thank you!

This is a Mopar 8 3/4 rear end housing that has been narrowed to factory A body dimensions. Housing is 52 5/8” end to end and 43” centers on spring perches. Located in San Jose, CA. Can deliver to spring fling if needed. Price is $500.

A body 8 3/4 rear housing. Came out of 1970 Dodge Dart. No issues when in car. $450.00 + shipping costs from 83318. OEM axles out of same car. 5 x 4" SBP. $100.00 + shipping. New back brace for 8 3/4 housing. Never installed. $60.00 + shipping. New spring perches for 8 3/4...

...accurate 8 3/4" rear axle width list". I wanted to reach out to any members here on the forum who have converted an E body 8 3/4 to an A body 8 3/4 and ask about what sorts of issues you ran into as well as any specific measurements you decided on shortening the rear end to, as well as leaf...

wanted a body 8 3/4 in pittsburgh area

I was curious if a rearend from a 75 D100 would fit an A body? To my knowledge the trucks came with 8 3/4" rearends? Is there a axle width difference?

I’ve got a sanitary (California GTS). 1968 8 3/4 rear end minus the center section It’s complete although I threw the brake line’s away I’m at $800 Probably take it to indy Tim @52537

I have a very nice A Body 8 3/4 housing with sbp axles. Backing plates included and I will update photos to show them. Shock plates available if needed for extra $. I have a couple pairs to choose from. Asking $800 plus shipping.( includes axles and backing plates). I can ship through Fastenal...

Looking for a b body rear end around the Peoria IL area. Prefer 8 3/4. Thanks!

I have a nice pair of A body 8 3/4 OEM sbp axles off a running 1969 A Body. Only removed to change to bbp. The left-hand studs have been replaced with right-hand studs. Asking 140.00 plus actual shipping from 80534 will discount if purchased with drum brake set in another post. Edit for...

I got lucky today, I found an a body 8 3/4 rear from a 71 Dart pretty local to me at a fair price. My cars a 67 Dart GT, was orignally a slant car that a previous owner swapped a 273 into. Everything else seems to be original. The 7 1/4 is humming and leaking and I want to swap it out. I'm...

The Dodge Coronet 8 3/4 is only 1" longer than the A-body 8 3/4.

This is a Mopar 8 3/4 rear end housing that has been narrowed to factory A body specifications. Housing is 52 5/8” end to end and 43” centers on spring perches. Housing has new seals. Brakes are rebuilt and are 11x3”. These can be used when converting to the large 5x4.5” bolt pattern. What is...

I have a nice 8 3/4 A Body brake setup off a 1969 A Body 10 x 1 3/4 Drums, backing plates, and most of the hardware is included. This was taken off a running car that went to bbp. I don't have a drum mic. but drums look like they are 10" and could be cleaned up and run or a light cut is all...

Stock length A body 8-3/4. 323 sure grip. 741 case. Moser aftermarket axles. 5x4.5 bolt pattern. 56-1/2 wheel flange to wheel flange. Comes with forged steel yoke with straps. No brakes or lines. 1,500$ or best located in Michigan will not ship. Pick up only.

I have 4 A body 8 3/4 rear housings. All but one had elongated perch alignment holes

Looking for a B body 8 3/4 rear end At least the housing

Looking for a 8 3/4 housing for an A body, stock perch location, don’t need axles or centre section but will entertain complete unit if it’s clean. I’m in southern Ontario Canada so looking for something local willing to drive for right part.

Hello there FABO (I am sorry, I dont really know where the most appropraiate place is to post this thread so I am posting it in multiple forums) I am serching for a reputable shop or person in California that is familar with and capable of cutting and shortening a E body 8 3/4 houseing and...

I recently got wheels for my 73 Duster which has an earlier b body 8 3/4. I am aware these axles are a semi popular option due to a body axle prices. I spent quite a while figuring out what wheels and what back spacing to use to accommodate a decent size tire. I figured I’d share what I ended up...

Dumb question for the group that has me stumped. I bought a '68 Cuda that had an 8-3/4" with a 741 case with 2.93 open gears and good big-bolt pattern Yukon axles with green bearings. I bought a used complete 3rd member (741 case with 3.91 gears and the good Powr-Lock clutches), installed...

Can some of you who have an Addco rear sway bar on an early A body post some installed pictures please? I'm trying to get a general idea of the link angle and the angle of the bar. I have the 7/8 bar, but the 3/4 bar installs the same way. Thanks.

Depending on the year of the Coronet

So luckily for me, I accidently scored an 8 3/4 rearend, but found out it is a 67 b-body rearend with 11in backing plates and 2:94 surerip to boot. I decided when the time comes, I'll probably swap this rear into my duster. I was thinking that instead of swapping out the diff assembly, I could...

I have 2 housings 8 3/4 narrowed to 48" and perches at 36" Big bolt pattern axles with green brgs and 10" X 2 1/2" brake backing plates. If your gonna mini tub an a body this are made to fit under the frame rails. $900.00 each plus shipping from Florida If interested can get you better photos.

i have one 8 3/4 with the rubber perch set up complete if i remember right and i should have one 68-70 8 3/4 housing no center or backing plates/brakes/axles

The info you need is right here: An accurate 8 3/4" rear axle width list Drum to drum, the A body BBP 7.25 is 56 3/4", the A body BBP 8.75 is 57 13/16" (about an inch wider overall, or about 1/2" each side).

I have two complete A Body 8 3/4 housings drum the drum very clean housings no rust with bell drums $1000.00 each plus shipping from Florida