Search results for query: *

I’ve never done it before but thought about your type of build with a Duster I had. If you are starting with no suspension whatsoever you could end up spending nearly as much on stock stuff as a HemiDennynor Alter-K-tion. Stick to stock /6 take-offs and you’ll be in savings. Aftermarket brake...

I have a set on a 340 and they work fine. No grinding. Small cam/springs. I also have a set of Comp Cams Magnum rockers (not 5.9/5.2 Magnum) on a 318. They were $600 more than the 273’s. That’s a good looking cam. I have always liked my cams in that neighborhood. My 73 Duster has a 222 @.050...

Edelbrock SP2P Edelbrock LD4B or Speedmaster Air Gap

I’ve got a similar cam in a stock compression 1973 340, 4-speed. Z and O heads. LD340. HFT. 273 rockers. Runs pretty good with 3.21 but definitely wants 3.55’s. It really wants some compression and cylinder head work.

5 hours from Phoenix. Head west on I-8, exit north at Ocotillo, CA and head up to Julian, CA for gold panning and fresh apples. Then head back to I-8 via Hwy 79 through Lake Cuyamaca and down to Pine Valley, CA. Plenty of Air BnB or traditional BnB’s in Julian/Cuyamaca/Pine Valley. San Diego...

BFGoodrich Radial T/A | RWL | 225/60R15 95S 225/60-15 is as good as you’re going to get with any Chrysler wheels. Other wheels and specs may allow more. I don’t know of many other options that get better than that at 14/15”. I have those, 15x7 Rallyes, and 1.03 t-bars on a 73 Duster with stock...

I’ve been thinking about getting a CB radio in my “Day 2” Duster my, retired trucker, Dad says there isn’t much anything there except construction companies and taxi companies. I guess I was hoping for more Hazard County kinda stuff.

Here’s some of Hanks’s latest creations on his 3D printer. A little Maddie Gras spirit and some patriotic letters

@BergmanAutoCraft

Prayers of healing to you!

This is how the car currently is. I got screwed by a chassis shop and now I’m just trying to sort out my priorities. The project might be dead in the water.

I agree. You have to get your ox out of the ditch sometimes. With that information known I think it’s more prudent to take care of infrastructure needs before locking yourself into a side gig.

There was a comment about the seller delivering. I assume seller is local to OP.

...for a patient seller. Use Pirate Ship and make the buyer pay for the deeply discounted shipping to sweeten the deals. Get an account on every For*bodiesOnly.com site and start posting. I really have a disdain for people asking ME to take less for something I’m trying to sell. Unless...

I'll have to get the wife to pull it up. I don't have the FB.

Can I get his phone number or e-mail?

Hamburger King You order from a telephone!

We love McMenamins! We have stayed at most of their hotel/resort locations. They have excellent beer. Ruby was my favorite!

How did you reach so far? Amplifier? I thought you could only reach a few miles.

I’m a regular at Hamburger King in my hometown. They pre-date “Burger King” by a good many years. They’ll be 100 years old in 3 years. I’ve been going there since at least 4 years old with my grandmother who lived just off Main St. Heck, I might just go there for lunch today! Hamburger King |...

Can you believe it? I don’t. The test was done by the people trying to sell the product. LOL! Now, this IS on a 2010 Toyota 4Runner AND it’s not just a filter replacement but a CAI (cold air induction) kit. Spectre Performance Air Intake Adds Horsepower and Torque to 2010-2015 Toyota...

I switched from this To this I do believe it made more power. Probably because it says Direct Connection on it though. I think the more sq/in a filter media has, the better. Ideally, you want fresh air. Think of newer vehicles with a tube and an air box with filter media a few feet up...

I agree. I had to put a lot of weight on the back ((150?) because the back casters were lifting when I lifted the engine. I would like to have a cherry picker that wouldn’t require that. I’ve been looking at the gantry crane at Horrible Freight and pondering building my own with I-beams I have...

@littleredcoffin has some nice A-pillars for sale. I have a 76 D100 but don’t have FB. Does he have a website? I need these:

I’ve had to do the same and used 45 lb weights on the back of the hoist to act as a counterbalance. My problem was the hydraulic cylinder hitting the headed panel on my cuda before getting the chain and hook over the carburetor hole lift plate.

Looks like the winch mount is only for the 12000 lb but you could probabaly adapt it to a smaller one 12,000 lb. Winch Hitch Mount Wireless remote options: Wireless Winch Remote Control and Wireless Winch Remote Winches I am considering: 9500 lb. Truck/SUV Winch with Wire Rope and 12,000 lb...

I was just looking at the Horrible Freight winches on Saturday. They have mounting plates and brackets that make it easy to mount and/or move. One mounting solution has a hitch receiver solution. They have a 9500 lb and a 12000 lb truck winch. I would stay away from a UTV winch. We use those at...

Don’t use the plans! They are for ideas only. I learned the hard way but with some slight alterations you could make that idea work. It works great for mock up but the k-frame locating pins are in the k-frame bolt holes. The white car and big block are not mine but this is what I was planning to...

The red x would be for the product as I described, not for you. I’m sure if you had one you wouldn’t have vouched for it. Also, I wouldn’t have just dropped the red X and not given my reply and experience. I think that is how the red x was abused or over used. As for the product, there are...