Search results for query: *

  1. N

    Inner fenders/splash guards, where to get some?

    So there's no company that remakes these? :O That suprises me! I'll try to find whole sets and the Coronet is most urgent! Thanks for the reply anyway! Might even be a good idea to make a whole bunch, might make a living :D
  2. N

    Inner fenders/splash guards, where to get some?

    Does anyone know of a good place to source new steel or fiberglass innerfenders/splash guards? Both the ones in the rear of the fender towards the door and forwards towards the headlights. I have both a '66 Dart and a '66 Coronet in need of them. Thanks for the help
  3. N

    Suspension and steering help

    I see where you're going! And that seems absolutely logical! I just wish I didn't have to ship everything halfway across the world.. Forgeting to add one part in the cart always lead to a 100$ shipping fee :/ I guess that's why I'm trying to get as complete as possible right away instead of...
  4. N

    Suspension and steering help

    Oh, that suprised me, why the hell would anyone mount rear sway bars then? :O I'm kind of confused since I've seen alot of people strongly argue for the benefits of tubular UCAs both on this forum and elsewhere with the argument that the stock UCAs won't allow for a corrrect alignment for...
  5. N

    Suspension and steering help

    Don’t know what else to do, the other option besides trying to improve upon stock suspension is getting an AlterK and StreetLynx? It seems we are thiniking along the same paths except for the rear sway bar and steering gear. What is the negative of getting a rear sway bar?
  6. N

    Suspension and steering help

    Hi Guys! I have a '66 Coronet that I'm thinking of upgrading the steering and suspension on. It's going to be a street car only but would like it to handle alot better than the clapped out stock parts but still be reasonable to ride in on longer trips. Torque boxes, radiator support and...
  7. N

    1952 Saratoga need help

    Is there a stock 4 barrel for this engine/transmission combo? Thats actually a good idea, I’ll look into that! Oh and by the way, is there any other brand of piston besides Egges that makes pistons for these early hemis?
  8. N

    1952 Saratoga need help

    As you can se on the picture from the manual there’s an electrical contact point on the kickdown switch and one on the ”dashpot magnet” Ill take a picture when I’m beside the car
  9. N

    1952 Saratoga need help

    Hi guys! First of all I know it’s the wrong forum but I also know it’s the best MoPar forum on the web so I’ll try anyways! My father has just bought a 1952 Chrysler Saratoga with 331 Hemi And since we got a 4-barrel intake manifold with the car but nu carburetor I started wondering if it’s...
  10. N

    Sorry for this but I need help with my 1992 K3500

    Oups! Seems like I forgot some really basic stuff! Regarding the ODO I actually checked it by driving a stretch of road I know and the mileage counter seems to be quite accurate It's a 350TBI that's bone stock. 4L80E transmission that seems to be in quite good condition. The mileage has been...
  11. N

    Sorry for this but I need help with my 1992 K3500

    First of all, sorry for this! I know this might be the wrong forum for this but you guys are some of the best people on the internet so I thought I might ask anyway. I have this 1992 K3500 Chevrolet pickup that's getting horrible fuel mileage.. Somewhere about 7/7,5mpg. i almost always run...
  12. N

    1966 Dart 4 door sedan window sweeps

    Hi! I can't seem to find anyone that sells window sweep kits for all four doors to my car including the outside rubber sweeps that I guess should be there, I got a kit but that had felt sweeps inside and out. Could anyone please point me in the right direction? Best regards / Emil
  13. N

    Regarding door panels

    Hi guys! I have a question! I have a 1966 4dr Dodge Dart in serious need of new doorpanels since the ones currently residing in the car is some home-made crap... Does anyone sell new door panels for the '66 4dr? Does the door panels from some other early-a fit? And last, does...
  14. N

    [WANTED] A lot of parts for 1966 Dart

    All parts wanted in good but not necessarily mint condition for a 1966 Dart 4dr Door panels, black Headlight bezels Armrests, all four, complete, black Grille Seatcovers front and rear bench, black Instrumentcluster, complete and working
  15. N

    Odd starter problem, pleade help quick!

    This is quite odd I must say, after testing another starter and measuring quite a bit I've come to the conclusion that even after fully extending ther starter gear out of the starter it is just barely touching the teeth of the turbine. it almost seems as if the the turbine is 1-2mm to far back...
  16. N

    Complete New wiringharness for 1966 Dart

    Who sells 'em? With correct length on cables and including fuse box and so on?
  17. N

    Odd starter problem, pleade help quick!

    Got the same answer from Summit but sending it back to the US from Sweden or waiting for a replacement isn't an option so can antone give me a more specific answer on what's the fault inside the starter so I gan get it fixed?
  18. N

    Odd starter problem, pleade help quick!

    Hi! I have an odd problem with my starter, it's a 1.9HP SUMMIT mini starter sitting on a TF A904 and a stroked 318 with no odd firmness when turning it by hand and the teeth on the turbine seems fine, none missing or anything. It's wired with 0 gauge cable directly from a brand new 120A Varta...
  19. N

    ´66 Dart headers with Alterktion

    I've tried both calling and mailing mr. Reilly without success this last week but I'll try again on monday! But it would be nice if anyone here disnknow the answer, also while I'm at it, will a 17x8 wheel with 5.68" backspacing and 235/45 -17 tires work all round on the same car with AlterK and...
  20. N

    ´66 Dart headers with Alterktion

    Hi! I'm probably going to buy a Alterk setup and a street lynx setup for the '66 Dart 4door I have and just by looking at it it seems like it would free up quite a bit of space for headers. The car has a 318 block and a columnshift 904, so now to the question, are there any headers that will...
  21. N

    Where to find headliner and door panels for a '66 Dart 4door?

    Oh, laysons was a good tip! But what do Inreally need to order to get me a complete armrest? :)
  22. N

    Where to find headliner and door panels for a '66 Dart 4door?

    Cant't seen to find it anywhere, and does anyone sell new armrests for these cars? :S
  23. N

    What do you guys think of this steering/susp upgrade?

    Then what tires would you suggest in the same dimensions of near?
  24. N

    What do you guys think of this steering/susp upgrade?

    I don't know really, this is a manual car from the start but im not that impressed with the manual :/ don't know but i think i'll just try ps and if it sucks i'll just get me a better manual box and bolt it in ;)
  25. N

    What do you guys think of this steering/susp upgrade?

    These are all some really good advice! =D Haven't really had time to read it all 'till now, working my *** of for a period... Regarding the Poly bushings, how often do one have to grease them to keep them from squeking? And as to the same tire size front and rear, sure, if I could fit a...
  26. N

    What do you guys think of this steering/susp upgrade?

    Hi! I have myself a '66 Dart and the steering and suspension on the car has seen it's better days so I'm going to do some upgrades, as of now it's completely stock with no sway bars and so on. It's a Smallblock stroker 392", 904 auto and 8.75 rear with KH discs in front and 10" Drums in the...
  27. N

    Spitfire Headers for sale

    I'd definately take a set without hesitation!
  28. N

    Dougs early-a headers

    Have any pictures of your install? =)
  29. N

    Edelbrock Perf RPM Intake threads

    Hi! Just wondering what the threads are fot the water pipes on the edelbrock intakes, Npt? What sizes?
  30. N

    Biggest tire and 15" wheel possible on a 1966 Dart?

    That's what I thought it looked like on pettybludarts picture too, seems to be alot of room on the inside of those 255's, should handle it at plenty more with the right beckspacing from what I'm seeing on the pict?
Back
Top