Search results for query: *

  1. 67valiant 100

    [WANTED] WTB Junk dual exhaust '68-'69 Cuda valance

    Just throwing this out there before I buy an AMD panel. Does anyone have a junk rear valance from a '68-'69 Cuda with the dual rectangle notches for the exhaust tips kicking around? Wanting to cut the factory notches out and graft them into my '69 single exhaust valance which is in pretty nice...
  2. 67valiant 100

    [WANTED] Big Block A-body Exhaust Manifolds

    Have purchased a 1967 set of 383 manifolds thanks to rlcbit. Will still consider purchasing a '68-'69 set of 383 manifolds if the price is right. Thanks, Charles
  3. 67valiant 100

    [WANTED] Big Block A-body Exhaust Manifolds

    Would this be good for building up engine block ears too? Have any pictures of repair work you've done with it? Thanks!
  4. 67valiant 100

    [WANTED] Big Block A-body Exhaust Manifolds

    That's what I was thinking... idk if it would be 100% FAST legal but they do let some things slide. Sure would help 500 cubes breath.
  5. 67valiant 100

    [WANTED] Big Block A-body Exhaust Manifolds

    Looking for a clean, resonable priced set of '67-'69 383 BB A-body manifolds. '68-'69 manifolds with the casting numbers: 2946729 left (has dimple in cyl 3 runner) 2863900 right is preferred since this is for a 1969 car. Will also consider a '67 set. The set I have are broken beyond...
  6. 67valiant 100

    [Found!] A-body Right Side Rocker Section

    In need of about 24-30 inches of the front half of a clean A-body right side (passenger) rocker for a '69 Cuda project I'm working on. Needs to be pretty clean original or left over AMD section. No rotted or smashed stuff please. Could also use the dual exhaust notches from the rear valance of...
  7. 67valiant 100

    [WANTED] Mopar Performance SB M1 Dual Plane Intake

    Searching for a couple Mopar Performance M1 LA small block dual plane intake part #p4532059. Looking for two of them. Any condition as long as the head surfaces havent been milled. Will consider other variations of the small block M1 dual plane. Thanks!
  8. 67valiant 100

    [WANTED] Strange Engineering Aluminum 8.75 Spool

    Searching for a Strange Engineering aluminum 8.75 35 spline spool. Part # D1566. Only interested in the spool itself. Good used is fine. Thanks, Charles
  9. 67valiant 100

    [WANTED] 72 340 duster

    Any serious rust in the rails etc? Fender tag & 8.75 there? What are you looking to get out of curiosity?
  10. 67valiant 100

    [Found!] Mopar Performance M1 Dual Plane RB Intake

    Do you use pay PayPal @Jorge Ramirez ?
  11. 67valiant 100

    [Found!] Mopar Performance M1 Dual Plane RB Intake

    What has be a bit hesitant is that if it doesn't fit your 440 then it makes me wonder if the intake has already been milled. But I dont know how you can tell whether or not it has been.
  12. 67valiant 100

    [Found!] Mopar Performance M1 Dual Plane RB Intake

    Iirc P4532063 is the casting number found on the intake & P4529118 is the catalog part number for it.
  13. 67valiant 100

    [Found!] Mopar Performance M1 Dual Plane RB Intake

    Looking for an RB M1 dual plane intake manifold part # P4532063 / P4529118 to finish buttoning up my '70 SFGTs 440. Nothing damaged please. Thanks, Charles
  14. 67valiant 100

    [WANTED] Mopar Performance Aluminum 8.75 Center Section P4876445

    Looking for one of the Mopar Performance P4876445 aluminum center section. Bare housing or ideally with 3.91s-4.30s gears and 35 spline spool. Thanks!
  15. 67valiant 100

    [WANTED] Late 340 Exhaust Manifolds

    Looking for late A-body 340 ('71-'73) exhaust manifold cores to port. Date codes not important, just the correct casting numbers: #3418623 (passenger) #3614368 (driver) Cheaper the better. Can meet up within 2hrs of lower NY/NJ/PA/CT area or meet at Carlisle in July.
  16. 67valiant 100

    [WANTED] mmc detroit "a" body books

    Id be interested in a book if it covers all '67-'76 cars or at the very least till '72.
  17. 67valiant 100

    [Found!] J-Head Cores (915 casting number)

    Hi yes, I sent you a PM back.
  18. 67valiant 100

    [Found!] J-Head Cores (915 casting number)

    Looking for good stock '70-'72 915 J-head cores to play around with and modify. 1.88s (preferred) or 2.02 valves is fine. Closer to the NY/NJ/PA/CT area the better (within 3-4hrs of NYC), but can also meet up at Carlisle this summer. Thanks, Charles
  19. 67valiant 100

    [Found!] Looking for 1972 340 exhaust manifolds, intakes & thermoquads

    Still looking for a few more of the above items. Have aquired 2 intakes, 1 carb, and possibly 1 set of manifolds so far. Also looking for 915 J-head cores as well. Thanks!
  20. 67valiant 100

    [Found!] Looking for 1972 340 exhaust manifolds, intakes & thermoquads

    Building my '72 Demon 340 to run in the FAST series racing. Looking for the following parts: Carb: Thermoquad #6139S {Automatic Transmission} Intake: #3614025 Exhaust: #3418623 (passenger) #3614368 (driver) Thank you, Charles
  21. 67valiant 100

    [WANTED] Big Block Porting Templates

    Looking for a complete set of the old DC/MP porting templates for big block iron heads. Going to be cleaning up the original 906 heads to my SFGT. I know the PDF file is out there but I'd prefer to have the original. Thanks, Charles
  22. 67valiant 100

    hurst shifter

    I paid $30 bucks for the one I got from Carlisle Mopar show. Took some 4-0 steel wool to it & shined it up pretty nice. It looks much better in person than the picture makes but its not perfect, good enough for a driver tho. Picture was before I steel wooled it.
  23. 67valiant 100

    hurst shifter

    thats factory :thumblef:
  24. 67valiant 100

    49 State Breather ***'y

    Our '71 383 lo-po Newport has the 3 nipple breather while are '70 383 lo-po Newport doesn't if that means anything to you. Both are 49 state cars.
  25. 67valiant 100

    WTB Clutch Kit For 9 1/2" Flywheel

    Looking to buy a clutch kit for the 9 1/2" flywheel used in early A-body cars for a 273. I think its the same clutch for a /6. It can't be a used one and needs to include clutch, pressure plate, throwout bearing, and alinement tool. Just want to get our Barracuda drivable as the clutch slips a...
  26. 67valiant 100

    '67 valiant dash pad wanted

    Your welcome :)
  27. 67valiant 100

    '67 valiant dash pad wanted

    Its the same as a '67 Dart & 'Cuda :yawinkle:
  28. 67valiant 100

    67 valiant drivers side door needed

    Their the same as '68-'69 Valiant 2 door posts altha the '69 has the inside lock rod moved ahead. Ask me how I know....... Also supposedly '67-'69 Dart 2 door post doors are the same. Somebody correct me if I'm wrong.
  29. 67valiant 100

    Valiant parts needed for my 67

    Those are going to to be tuff to find. Other than our cars I've never seen another red interior Valiant.
Back
Top