Search results for query: *

I have a Snap On brand and it works great. I'm sure there are others.

Yup. I needed a quick box a few years back and I bought one pretty nice box for the money.

I have one like that with a 360 on it right now, I can move it around with confidence that it won't fall over if one of the wheels hits a pebble on the floor, lol. Very sturdy.

I wonder if they are talking about the bung itself, and not the pan.

HA! That was what I was gonna suggest, lol.

I'll stick with my 300 dollar Snap On box, lol.

I bought a set and they were shipped from down south to Michigan, I think it was about 90 bucks for both in separate boxes.

Preferably with butterscotch schnapps in it. YUM

If the drawers all flow nicely on the Snap On box, I'd snag it, clean it and paint it. The tracks for the drawers were still available last I knew from Snap On, if you needed a couple.

Well, looks like that might cure my issue, lol. Here is what I have. Old phone plug on the right, new on the left. And, built in so I can use it with my laptop.

Yeah I edited my post, mine has both built in. The plug I speak of is the appropriate plug for the phone, they changed up since I got my new phone. Are you saying they now have an adapter to correct that issue?

I have one for my smart phone it seems to work well. I think it was less than 15 bucks. IF you go that route, make sure it has the correct plug end for your phone. I have to use my old phone, because the plugs changed. Mine also has a USB plug. And it also came with a wire that attaches to...

Can't find anything on the net about newlookey.com or N EWL. I think I'd steer clear.

This works well vvv. When I was a young fella I used to work for Mayflower as a driver/loader. We quite often picked up whole households and put them in storage sometimes for a couple years at a time. We used charcoal (the basic charcoal NOT the self lighting stuff) we would purchase ladies...

Post the photos. Place your comment about the 1st photo above it. Then place your cursor at the bottom right corner of the first photo and hit enter a couple times to create the space to put in your comment. Rinse and repeat.

If it's a 2 post lift, no way I would even think about trusting 4 inches of concrete.

How old is it? If it's fairly new, there may be a spark arrester screen under the muffler (Thanks California). I had the same issue with a different piece of equipment. I took out that screen because it was plugged up with carbon.

LOL, I knew that. Last one I blew off the roof was around 3 or 4 in the morning. No one batted an eye, lol, well except the coon maybe.

I find lead works well. :D

Snap On set for me.

I have a set of Snap On and I also have the 1/2 inch drive Harbor Freight one. They are within 1 foot pound more or less of each other. They also stand behind their hand tools, if it breaks take it back and get a new one. Beings I don't use it professionally the HF tool works well .

Check with a good local hardware store. I 'think' you can by 90's pre-bent, you will just need to buy couplers to connect the bend to the straight.

That's a lot of stove for 64 square feet, even in the dead of winter. I'm not sure, but I would guess it will run you slap outta there, lol.

Costco be too uppity for me, lol.

That's ^^ what I'm talking about, lol. That's quite a bit thinner, more like the ones on my Matabo.

The small one is faster. I have one, and it works OK but it needs a thinner wheel. The ones that came with it are too thick IMO.

Sounds like a reasonable deal. Keep in mind, IF it isn't set up for gas and he just has the kit with it, some things need to be changed to run the gas as opposed to flux wire. At least the one I have did, if I remember correctly I had to change the polarity. Just something to keep in mind.

Go look if it's close enough. Price seems fair as long as it isn't ragged out and it works. Ask to plug it in and see if it runs. How would he not know about the regulator, it would be pretty obvious either way. Either he has one or he doesn't.

Can't say for sure, I do know that I have a Craftsman unit and I have a Dremel. It does fit both. I guess you would have to look for picks and compare.

These are inch and 3/4 OAL. Goxawee 20pcs Diamond Burr Set Rotary Grinding Drill Bits Set for Dremel Tool | eBay And I would suggest this: Flexible Dremel Extension Shaft long moto attachment chuck Rotary Tool accessory | eBay IF you don't have one. I have one of these, and I sometimes...