Search results for query: *

Just buy it and put it on. Correct? Who cares if you want it. It’s your car.

I just did it a few weeks ago. Anco wipers (yellow and blue packages) still sold today work and the blades are cheaper…. Sorry but when did wiper blades start selling for $25 each? Frecken auto part stores are charging more than the dealers. Sorry - a little rant. Anyhow, they are out there. I...

What year and post a proper want ad in the correct section.

I just buy an okay set of wipers and remove the rubbers and metal sides. Cut the rubbers to fit and install.

Heck get fancy with the wheels- threaded rod 1” x 12” and extra heavy 1” long barrel nuts and some brackets so they are adjustable.

When I did my 66- I had it in the rotisserie and lowered it lower to the ground about 18” on top of jack stands. I shimmed the jack stands (3 per side) with wood and plywood. I leveled out the top of the rockers with this method. When I did the quarters - I was able to cut off and install and...

Leave it - change the fender (who cares the color) and go full “Joe Dirt.” I however do like the look. When I was in Highschool (tech school) a guy in the body shop for giggles buffed red primer after laying down like 4 coats. Buffed out to a beautiful flip flop purple/ red. He clear coated...

Yes drill in the bump out in the center there. Antenna grommet goes there (small like 1/2”) to seal the cable. It kinda looks like a pimple on the side of the triangle. Drill inside to outside.

1) read the directions on what the supplies you have require. 2) truck bed line on your floors? Sorry your car not mine but that is going to be a pain to clean dirt and hold moisture between the metal and the liner. Allowing rot to spread easy. I did that on a cab of a 72’ W200. Sand blasted...

You do realize that when AMD has to make the die that forms each fender it’s over $140,000.00 per side. That’s $280,000.00 per pair. Selling those fenders at $500 each means they need to sell 560 sets plus there will be loss for transportation damages and free donations for car clubs and such...

Sorry to add- on the pocket style there is a plastic cap and shoulder that goes with the screw. The shoulder goes under the screw head like a washer and the cap snaps on to cover the head. I believe those screws are small head than I advised above. As for fit and finish… 8 out of 10. Not bad...

There are two styles- screw on (Direct connection made) or glass on (aftermarket fiberglass style) The screw on I can speak about as I’ve had them and plan on using one on my Demon when it’s completed. You use like a 3/4”-1” self drill self tap screw with a flat Phillips drive head. The head is...

Very cool!

My understanding is the factory style was the blower motor in the rear shelf. Aftermarket was the copper strips attached to the glass and run with electricity as a dealer add on. Typically aftermarket. Those are very rare and seldom work, customers did not need them due to the angle of the...

Dipping before you cut out metal. Liquid will get everywhere. They dip them power wash, then dip and power wash and typically a third dip and power wash and then a neutralize bath then a primer of some sort. It’s not like sand blasting where you are paying for the time by the hour. And the more...

Auto body Special-t’s in Middlefield CT also sells pieces. I’m sorry I cannot find the correct spelling or website. But they got them. Right on Route 66….. not the cool Route 66. The Communist state of Connecticut 66.

I agree with above but will add if you take off the gravel guards between the fender and the firewall you can gain access to the hinges way easier. Also at first movement of the hood go slow up and down. Lots of penetration oil- I prefer Pb blaster also.

Some did and some did not. My 1st 72 Demon 340 3 speed car was like 04/72 build date. It was a stripped car and had metal Demon but no 340 call outs. Higher interior trim level. My next Demon 340 was a 72 with striped and Demon 340 decals fenders and rear. My currrent demon has Demon 340 metal...

Wow! How different for the same year car. My Dodge and Dart are on opposite sides of the lid. Both are stick ons

No they are not.

I’m sure a company like Tanks inc. In Iowa I believe could easily build you that tank.

eBay is also a good resource for complete kits. Sometimes they are hit or mis. I have bought kits from Vans LLC. They too have been a good source Layson’s restorations is another great place to look. Rick is on here. Good people. Syleng1

Sagging hinges and worn out mechanisms are possibly to blame. Adjustment of the door also. If you lift the door and it moves up and works better then the hinges are worn. If all that is good then start searching for a new latch mechanism. They are out there. I bought a new one off eBay for like...

Or drunk. Seriously- the best painters typically use alcohol to relax them and allow them to paint like no other. I don’t recommend this practice- just what I’ve observed over the years.

From the factory they painted the lettering first, then when dry a stamp that fit the letters perfectly dropped over the letters and the back ground was sprayed. I saw a video on it on YouTube years ago. It is definitely a process.

I own a 72 early production stripper 340/4 speed car. Cloth interior and rubber floor mat, only option is power steering. The badging is the pot metal Demon Emblems, Dart emblem on trunk lid with no Demon call out out back. My 340 emblems are on both fender sides just to the lower right of the...

Those are standard bullet ends. Maybe try a different auto parts store or ask in wanted ad for the bullets female with a section of wire from any one who has older harness or a collection of harnesses to rob them from.

Maybe start with make model and year. And place a want ad. Some one here possibly has one for sale or an extra.

Post a wanted ad. Posting it here is not where it needs to be.

Sounds like #moparleo is about to get a lot busier. Syleng1