Search results for query: ax15

@dartslantsix and @75slant6 are/were running an Ax15. Dartslantsix had his for sale several months ago. Either way, they should both have some idea of how they work in a car. Also, the AX15 and R154 have the same bellhousing bolt pattern. As does the AR5/MA5. So you could start with an AX15...

My floor is rotten and I want a 5 speed. I know neither is gonna fit into my 64 dart but I'm ready to cut the tunnel out and make it fit. It's going a behind a 360 magnum but this is just a very stock street car so I'm sure I'll be fine. These two trannys are cheap and everywhere in old...

I drive a dakota with an ax15 and really like it but I was worried about killing it with a 360

I just picked up an AX15 and a v6 bellhousing for cheap. I am going to put it in my Duster. Car currently has an LA 318 in it. Anyone who has done this could you let me know what flywheel, clutch and starter I need?

I've got an '88 Dak with a mild Magnum 5.9 and an AX-15; pounding on it for 3 years now and no issues.

The ax15 is so plug and play is why I'm drawn to it and I like how it feels so the using it every day bias is there

I had an AX15 in my Barracuda. (Just pulled it this weekend and it's for sale) I have 3.83 gears and was running a Magnum 5.2L. First gear was pretty much a granny, so when racing I'd start in 2nd. There was a big jump between 2-3 and it felt like the car didn't pick up speed until 3rd. It...

They also got the NV2500 and AX15 in some years- I've always thought those were Dakota-only, but I found a 2500 in one half ton and pulled a spare AX15 for my Dakota out of another... it seems like in some years they used whatever they could get the cheapest or was the most available (that...

Ain't gonna tub it out as long as folks at work don't bully me into it

...T5 because the road has been traveled before and the parts are there. they're rated about the same torque wise. but you're in a light car and you'll have limited tire width-- unless you mini tub out back. there's somebody on here running an ax15... i forget who but it's seemed to hold up...

Yup. 20 year old me on a super small budget wasn’t gonna be able to afford a T56 swap, so AX15 it was… that’s been 9 years and 18,000 miles ago and she’s still doing GREAT behind my stock 5.9.

Yeah I ain't taking the cross member for the stock tranny out with out replacing it with a cross member. If it fits I'll just leave it

There are a couple of guys running an AX15. I know @dartslantsix is one - David Belau @75slant6 is another. An R154/MA5/AR5 could be swapped into the same place and gives better ratios. And the MA5 survived Rocky Mountain Race Week in a C10 behind a 392.

Maybe it would be better to say that it sounds like the deeper final drive makes the transmission feel very truck like to you. Seems like @75slant6 ran a deeper final drive with his AX15 when he first did the swap and then dropped down to a 2.76 final drive.

https://www.novak-adapt.com/knowledge/transmissions/manual/ax15/ the ratios are ; 3.83-2.33-1.44-1.00-.79od the splits are .61-.62-.69-.79

If the AX15 is from a Dakota, the shifter will come up close to the torsion bar crossmember area in the transmission tunnel; not real close to the dashboard.

Anyone ever consider using an AX15 in their A body? I've heard of it handling 400hp in Jeep LS swaps with ease assuming it's been taken care of. Seems like it could be an interesting 5 speed option..... Or maybe i'm just insane.

...of firewall/trans tunnel/crossmember reworking to get it to fit- and the amount will depend on if you are using an NV2500, NV3500, NV4500, or AX15 transmission. They also all require hydraulic clutch linkage, and most of the 2000 and later transmissions also lack the proper speedometer...

But you have driven an AX15 with a tall rear gear, which I for one have not. So you are far better equipped to actually speak to how it drives regardless of what you compare it to. Frankly, every trans has compromises. For example, a narrow ratio trans needs a deeper rear gear to make up for...

Correct, I ran 3.23 gears initially and 1st gear was worthless outside of taking off on a hill, after swapping to 2.76’s I shift it like any other 5 speed, aside from when I’m auto crossing, then I can run faster times if I start off in 2nd. Don’t spin as easily off the line and don’t need to...

Plus an AX15 still has better splits than an A833OD. I also like that you can match it up with a rear gear that most people are throwing away or selling for cheap.

This is the exact master/slave cylinder setup I used in my ax15 swap. And like you said, the pushrod length wasn’t correct, so I cut out a section of the rod, threaded the ends of the cut rods and put it back together with a coupling nut to give me adjustability.

...to cut and rebuild the torsion bar crossmember for clearance. Not to mention the (truck) gear ratios are less than ideal. For more info, do this: and you will get this: =1&c[nodes][0]=72&o=relevance"]Search results for query: ax15 Enough info and reading to keep you busy for a couple of...

Not the greatest videos, but... 1972 Dodge Charger 5.9 Magnum AX15 5 Speed Swap Part 1 - Bing video 1972 Dodge Charger 5.9 Magnum AX15 5 Speed Swap Part 2 - Bing video

...few old school companies that make them. A phone call or email may set you up. I think Allpar has a large chart that defines the bolt patterns for most of the Chrysler engines. Honestly, because you are considering a different trans, I'd seriously look into an overdrive unit. Dakota or Jeep...

Look in to the Toyota Supra R154 trans. Same family as the ax15 and can handle quite a bit of power.

...Knowing what I now know, I could be very happy with; a detuned for torque340, and the A833od. or A hi-compression 318 with a 5-speed like the AX15. My dream would be a close ratio 4-speed automatic with a clutch pedal, and a deep overdrive, or a 5-speed auto with loc-up, and with a fake...

This guy ran an MA5, which is the Colorado version of the AX15. The rig is a C10 with a cammed truck 392 G3 Hemi, and it survived Rocky Mountain Drag Week.

Seems like there are a couple of guys running an AX15. I know @dartslantsix is one - David Belau @75slant6 is maybe the other?

As far as I've seen in the Jeep LS swap forums, dudes dig em and you really can't find an LS with less than 290 hp. Here's what Novak says. The Novak Guide to the Aisin-Warner AX15 Transmission