Search results for query: *

I totally agree with you. 4 door models mostly look brilliant aswell but 2 doors look a little bit better but I wouldn't mind owning a 4 door version aswell. I mean, I actually do (but because I couldn't afford a Scamp). I think 4 door sedans and wagons need to get more attention. Edsel wagons...

273 engine from '65 Belvedere. Turns over, bores look reasonable. Partially dismantled but appears to be complete. Has adjustable rockers. Heads look like they may have been rebuilt but have surface. If you can use and can pick it up from Fullerton Ca you can have it free. I have an engine hoist...

I fabbed up a mounting bracket for my Hardtop then used the Napaonline ones. Not perfect but not correct or a show car.

When you see the ads on here that state do your homework before bidding this is why. He did not falsely advertise it and there was not any unreported defect. And you did not intend to buy the wrong part. It's an unfortunate circumstance but it happens.

To far away... You've been pulling some out id sure like to bring to Wisconsin

Lift, you say? Hmmm...you're not that far from me....

was expecting something else ....

This is a 1970/71 440 Six Barrel Air Cleaner Decal. I bought it decades ago when I was restoring my 1971 440+6 Cuda, but never installed it. $20.00. Local pickup, or buyer pays shipping.

How much total with shipping? Buffalo NY 14224 And if you have a photo it would be great.

You probably don't have a car yourself

Most of the cars were project car's, or 6 cylinder and no ac. You seem like you know everything, let's see what you can find, or should I tell you

screw in studs would add some cost. There might be some additional machining cost, as you are now tapping 5 holes instead of drilling/reaming. OEM grade press in studs are $.80-$1.50 each (the 2 press in studs I was looking at was $9-11 from rockauto for a pair of adapters), and just a quick...

If that guy, whoever he is, thinks oil pressure is related to rod side clearance, then he should be called a "idiot" not a "guru" that IS not your problem!

2005 Chrysler Crossfire 135K miles Mercedes built 3.2L V6 6 speed Decent paint and interior. Fun, quick little car. Add sticky rear tires and you got yourself a 13 second, good handling car with plenty of torque. Located in Western Maryland $4000 obo. PM with questions or to discuss...

Where the block is out of wack determines what’s taken out , boring or honing, getting off track, I best shut up! Carry on folks!

gauge is good do they make roller flat tappet? I think an older version crane solid flat tappet. Ironmike I welcome to hear what you think but like I've said I'm not sure about any of it but theoretically what Mr Devine and I chatted about makes more sense than anything else...... sometimes the...

You can do it. It happens all the time. If done correctly it won’t move the crank .001 if that.

https://www.napaonline.com/en/p/EXH36272 cheap enough and does the job until tax return /Christmas/next fathers day:lol:

Just a bit of the story, 69 Cuda, 318 auto, have installed Pertronix dist and the correct coil, have been tracking down issue of no start. Last item on list was to replace the coil to dist. cap spark plug wire [ did replace the whole set of plug wires, but coil wire need to be longer due to...

Not to make any excuses for the XMP situation ( I've heard different versions from different sources) but NPK went through a transformation during this last weekend. The series is now No Prep Elites and they've added a four race championship series at the conclusion of the 'regular' season in...

I get my short block back from the machine shop Friday. No big deal - slap it all together and roll through! :lol: I'll be there regardless. Lookin' forward to seeing all you folks! Just find the tall guy with 4 kids in tow and that'll be me.

Majority won. I painted it. Used a rustoleum primer and gloss black. Thanks for the input!

except his axles won't work with my 1976 SBP rear end, and you either have to buy different drums, or modify yours. it says that you can redrill your existing drums, but doesn't mention the drum center bore. if that's the case, then these axles wouldn't have the correct BBP register, as your...

I have a decent set from a later year Duster, but they're plastic & need a little work on one of the mounting holes. $25 for the pair + the shipping from Pa. If any interest.

...and no amount of idle-timing would cure it, nor idle-rpm. Afterwards, like said; it would idle down to 550 in gear, and pulling itself, with just 5* of Idle-advance, with a starter gear of 2.66 x 3.55= 9.44. My attempt at solving this prior to tear-down included; A) the engine was already...

Get a smaller water pump pulley.

It's the only way to sell cars to get a good deal on both ends. I do it all the time for derby cars. Seller usually makes a little more than selling outright and he buyer is happy because he spent little to no money on it. Even with shipping costs it will be cheaper for the buyer. It's a...

I've been on the flipside of this with Moparofficial, he wanted a full refund due to a defect I was completely unaware of. Bolted on and work fine for me, but didn't fit his criteria so it got sent back to me. Hopefully he makes good on this like I had to do with him.

Go for it. But remember no project car's. V/8 with a automatic transmission, p/s, a/c. Manual disc brakes would be nice too. I'm willing to bet that no body on here can find what I'm looking for