Search results for query: *

Is it with a nipple for hose to breather cap?

0408 = scheduled assemble date 1963 WWP = white roof/white body/not sure on this red paint upper door inside. 3088 = Chryslers order number from zone reps.

Thanks for sharing. I was wondering what pcv and breather cap they used. But since the cars arrived at Offenhauser with a 273 hp engine, it already had those items so that make sence. Re the red thermostat housing they just shifted it over to the aluminium intake manifold. So my guess is that...

Made a decision today. After going thru old carmagazines from late 64 and early/mid 1965 it seems like Chrysler mostly used the Racer Brown ST12 for mild street use and ST14 for mild racing. In the later part of 1965 they tested Camcraft that later becake the camshaft for the D/Dart. So I called...

Finally the air cleaner was done. However the lid needs to be replaced. Looks like it has gone thru a crusher!!

Does your resonator have a stainless steel tip or is it all painted black?

Yes, chrome plated SEMS screws w/intergral washers.

That's an early assembled car!

A couple of years ago I was able to buy these nice dealer signs for 1965 Dodge from my friend @66340SEDAN Keith Voigt. My neighbour helped me to make black metal boxes that will be mounted on a black plywood board with a mounted lamp. The glass shop are going to laser cut four white fratzog...

I'm looking for a rebuildable 273 or 318 in rebuildable condition. Doesn't need to be running but complete. Thanks FABO

Last night I talked to Offenhauser. They told me that the Offenhauser hi rise intake manifold added 18 hp and a dual 4 were 22 hp. Low rise aftermarket intake were 12 hp. They had no documentation left but they worked with camshaft manufacturers like Racer Brown, Edelbrock, Camcraft and...

I think it's the same body.

The engine is......a mess. Greasy, dirty and rusty! With help of my oldest grand child progress was performed today.

Finally it was time for the paint, International red. I used a set of newer valve covers to cover the heads when painting the engine. The black headers by some company will need a removed oil filter. @65 dart man, what supplier? I just wish that Offenhauser would have some answer on the...

We'll see when we get to that point.

Don Hudson 711 Bowman Mills Rd Strasburg Va 22657

That should work. @65 Dartman .

I'm interested. Would you ship to Sweden if I can have a friend send you the money order?

I would say during 1965 model year. Have a June 65 produced Dart 270 wagon with the Certicard loose in glove compartment. Adding the black plastic holder was 1966.

I'll will search tomorrow night. In bed now.

That's what I did with my 1965 Dart Charger center.

I spoked last night with Offenhauser who will give it a try to get more input. Found a story in a motor magazine about a Dart Charger 273 built by the owner for drag racing. That decal on the front fender, could that Racer brown camshaft been added by Offenhauser.......? We'll see next week.

When introducing the 273 in the model year it was first a two barrel carb at 180 hp. For the 1965 model year Chrysler introduced the 273 in two versions. A two barrel 273 still at 180 hp and then the new 273 four barrel engine. 235 hp, Carter AFB carb on a cast iron four barrel intake, hp...

The speaker on this one was dead. Will glass bead it and a new coat of paint. The clips that hold the wiring to the neutral start switch was there. Restored the cable and mounted it the way it was installed. Even the driver side exhaust manifold brackets were there. The accelrator wire is...

Thanks Don for having me in mind. However that Y-pipe doesn't fit against the 64/65 exhaust manifold on the drivers side.

I'll take it. Can you check shipping to 92263 Tavelsjo, Sweden for me. Do you accept Paypal?

Super mice car you found. What's the plan with it?

Great work Kegan!

What I know of all wheels were black when you had full wheel covers. Cars with dog dish had body color on the rims.