Search results for query: Driveshaft

...has a 904 with an 8.75 Sure Grip. I have a local 727 I would like to buy to rebuild and eventually replace the 904 with. I know the driveshaft will be different, but is there a standard length for this combination, or do I have to wait until the transmission is in and measure the distance...

Can anyone tell me the driveshaft length on a 1963 Dart Convertible? I don't have the original and can't find the length in google land.

1966 Dart, 225 a833 with 8 3/4. Looking for a decent drive shaft. 50.25 to 50.50 center to center of joints. I'm in Hampton VA. How much with shipping? Or if your near me, I have 6 painted steelies 4 - 13" and 2 - 14" small bolt pattern willing to trade. Believe they are 4" wide.

New, never used aluminum adjustable driveshaft loop. It bolts on to the transmission crossmember and the loop is 5" in diameter. I didn't know when I bought it that it only mounts to pre-73 biscuit type trans. crossmembers. I put a 73 spool mount crossmember in my 69 Dart and it won't fit on it...

For sale is a used original driveshaft from a 1970 Dart with an A904 and a 7 1/4” axle. It has been primed but has been stored inside. It will need to be rebuilt. Measures approx 54.25” from center of u-joint to center of u-joint. $50 local pick up Located in Gurnee, IL 60031

I am going from 440/727 to 440/A833. I know the driveshaft will be too short, what is the needed? 1971 Duster, 8 3/4 rearend. I searched but now I am dizzy as people seem to measure differently. I have read anywhere from 47.75 to 48.96 "

New, never used aluminum adjustable driveshaft loop. I bought this for my Dart but never used it. It bolts on to the transmission crossmember and the loop is 5" in diameter. Asking $120 + postage for it. I don't have Paypal so money orders, particularly postal are preferred. I will also accept a...

65 Plymouth valiant, 340, 904 automatic floor shifter. It has the “ball and trunnion” front joint on the driveshaft. Has anyone had any success in upgrading this type of driveshaft? I would like to keep this transmission as long as I can upgrade the driveshaft. I don’t plan on having big...

I'm looking for a driveshaft for a 72 Duster 318/904/8.75 combo the dimensions are 2.75 diameter x 48.96 length A 71 Valiant might work too 2.75 diameter x 49.25 length The length is from center to center of yokes. Closer to zip 08244 please Thanks for your consideration

New, never used aluminum adjustable driveshaft loop. I bought this for my Dart I'm building when I had plans to build it to take to the track. I changed my plans and decided to just build the car for the street instead so I am not going to use it. The loop is 5" in diameter. Asking $120 +...

I changed my rear end to a Dana so I need to change my driveshaft length. How far into the trans does the yoke need to be inserted before measuring how much to shorten the shaft?

New, never used aluminum adjustable driveshaft loop. I bought this for my Dart I'm building when I had plans to build it to take to the track. I changed my plans and decided to just build the car for the street instead so I am not going to use it. The loop is 5" in diameter. Asking $125 +...

Looking to get one for a small block., tried to get a melling one is on back order with unknown eta. Installed a h/v on my sons car since I had one plus don't have to worry down the road when we upgrade parts. Please let me know Matt

New, never used aluminum adjustable driveshaft loop. I bought this for my Dart I'm building when I had plans to build it to take to the track. I changed my plans and decided to just build the car for the street instead so I am not going to use the loop. Asking $125 + postage for it. Payment by...

30 spline Spicer slip yoke 727 trans Spicer joints 45 1/4" center distance Maybe 50 miles $350 plus shipping located Allentown PA

Driveshaft for sale. Looks like 50-1/8" long. Measurements in the pictures. Asking $80.00 plus shipping charges

I am soon going to be swapping my 8.24 out for a 8.75 rearend. I will be needing a driveshaft for my 73 340 Duster with an A833. If you want to trade or buy my 8-1/4 it will be available after I install the 8-3/4 as it's a driving car.

I put the motor and transmission in my GTX over the weekend, buy seem to have lost the driveshaft. (Has been apart for 20 years and moved garages 5 times) According to the chart, it is a 53.64" long driveshaft.

Is there an OE driveshaft that will drop-in for a factory 7.25 > 8.25 (donor is a 1974 Dart) differential swap in a '68 Barracuda, /6 with a 904? Also, any PNs for U-joint recommendations? I will be using a carrier out of a '91 Jeep to bolt up a 3.23 R&P. Any recommendations, warnings, or...

...retainer). Includes: -aluminum slant six bellhousing with dust cover, -bellhousing to engine brace, clutch fork, fork pivot, seals -driveshaft (~56” center to center) I pulled the transmission out of my 1965 Dart when converting to small block, using the small 4.354 inch out bearing...

Another, "never gonna use ' clean out ... Summit racing brand driveshaft loop kit. $20 picked up price. $35 shipped in lower 48 Located in St George Utah

...trying to reuse as much as possible since I don't have much money so I'm keeping the 7 1/4 rear end for now and I'm trying to reuse the driveshaft, I've ordered a new slip yoke that mates to the trans but I'm concerned it won't mate to the driveshaft since it uses a 1350 U joint, is there a...

Can someone post an early A body shifter with linkage in clear pics? Preferably a Hurst set up.

I have a cyclic vibration in a totally new drivetrain that I would usually associate with a problem in driveshaft angles. If I put the car on a lift and adjust things so that the transmission pan rail is flat, the angle of the 8 3/4 rear chunk as measured at the mounting pads for the pinion...

Hi looking for a bolt in A-body driveshaft loop. ‘67 barracuda If you have one laying around let me know. I can pay with money order or Venmo. I don’t have PayPal, tired of giving them money. Shipping to 83709 Thanks

Car was originally /6 with manual 3 speed (think it's known as A230). A833 4 speed OD installed using same drive shaft which I did not expect. I suspect, if A833 4 speed is installed, drive shaft should work. Differential is the original 7 1/4. This will be a temporary install until 8 3/4 is...

I have a 1973 Dodge Dart Sport. I recently put a 8.75 rear in it and when I went to install the driveshaft it was too long. Does anyone know the size I need or have a link to purchase one the correct size. Thanks

727 yoke with 7260 u joint and a 7290 U joint on pinion side. 46" long. Pick up in SE PA $75.00

I've had driveshafts shortened before but it's been 20 years. IIRC it was around $100 back then. I just got a quote from a local powertrain shop and they want $200 plus joints.(non greasable Spicer) That's new driveshaft territory. If I go new, is the tapered end a requirement for...

...it including a slipping trans. & a bad driveline vibration at ~55mph). The past few years of ownership have included: confirming proper driveshaft balance & U-joints, rebuilt 727, new engine(a stroked internally balanced 360), new tires(balance checked twice), & some shimming work to correct...