Search results for query: *

I don't know how in hell any of you even know how to answer. Is this a SB or B/RB or is it even a Mopar?

I doubt this is much help, maybe encouragement. Just remember, that "back then," at some point, SOMEBODY put a B/RB into one of those and NObody made swap mounts, or a DIY book and Al Gore had yet to "invent the internet." Most guys, even shops, did not have MIG welders, either

I may be kidding but I advise you to do not EVER assume the role of a driving instructor LOLOLOL My high school driver's ed, "after school," 1965--I was a junior. About a 63 Stupidbaker auto, a 58 Chev auto, both of those were former USAF staff cars and all black. We had a...

Actually neither one of you are right or wrong, as, poorly stated The fact is whether or not you need proportioning depends on weight bias, tires, sizes of brakes whether drum or disc, and so on. A vehicle, light in the rear, with large rear tires and lots of traction, might just...

THIS!!! If you don't have the 2 manual volumes, run over to MyMopar and download them. Not all the connectors are there, but most. Take stuff that doesn't work one at a time and repost here, EG brake lights. The brake light switch should ALWAYS be hot and gets power from one of the...

Don't feel bad, it has happened to a LOT of guys. I have done some things that silly, just not the ammeter one. I am 76

Wiper motors are not my favorite subject. Run over to MyMopar and download the closest you can get to the proper service manual, free. You may have to accept Dodge vs Plymouth and vice versa

Nice. Those must be pretty uncommon over there.

Or harmonic balancer puller. EVERY body should have one, and you can buy them ANYWHERE. Be sure you check it out, as modern ones are likely to come with all or at least partial metric bolts. Buy a good one it will last you for life. Lyle, KD tool, a known brand name.

If the fuel gauge has 3 terminals, the IVR is built into that gauge How it works External IVR plugs into the circuit board, has a ground, and receives 12V from the key. It "chops" the 12V (original type works like a flasher) to approximently 50% duty cycle. It feeds this power...

None of the short (E body) or long (B body) pistol grips I've seen were that "straight." If you search something like 70 Cuda pistol grip you'll see what I mean.

AND NOW yet another ANNOYING STORY from the old days In the summer / fall of 67, before I joined the Navy in the spring of 68, I had a high school "friend" who burned my *** BAD. And soon after that we weren't friends, anymore He had a job throwing gas at a local station. He...

I don't know how that line is supposed to be secured on a fish, but that is EXACTLY how it is configured, with a "U" up high near the top of the fender. And ending down into the frame rail is EXACTLY how it ends If it is dripping fuel, it is VERY simple---your tank is too full. The...

Pull the coil high tension wire and ground it to kill the spark. See if it cranks. If so, it's not compression, battery, cables, or the starter. Its way too much timing advance If it still does not crank it could be most any of the above. Start by looking for hot spots in the cables...

Found this thread. OldManMopar is the MAN https://www.forabodiesonly.com/mopar/threads/proportioning-valve-question-for-disc-brake-conversion.518464/

I keep trying to tell you guys NOT to do {rely} on this. Now, don't get me wrong, you may be right in this case. But PLEASE do not try and use continuity and ohm readings on high current circuits. "The usual" is, that it is way worse than continuity might suggest. In other words you...

Here's my advice. You need the proper documentation for these brakes. If you are using the 73/ later factory brakes, then go to MyMopar and download the 73 service manuals, and they are free Here is the combo valve pictorial, from page 5-19

LOL, no idea. That was posted 10 years ago

Both you have spoken about is NOT factory. There is no possible way for us to know what they are 4. Best thing I think is to remove them and then if something does not work troubleshoot it to figure out why, and if necessary, rewire as needed. And here it comes so, hang TF ON...

1...Drain. Start with a 12V test lamp. Disconnect battery ground, and put the lamp between battery post and ground. Does it light? Check everything imaginable. Is lighter pulled out, glove box lamp out, trunk light? Then move to your multimeter, put that in series on the high amps...

I would discourage you from doing that, rather, fix or upgrade the actual brakes. If the brakes are larger than 9" perhaps the lining is glazed or poorly fitted, etc. By going to larger brakes or front disks, you get way more than just power brakes. My legs are not that strong. When my...

I sort of disagree. My original 273 Dart when I bought it fit that. After scoring better T bars (used), new, better shocks and radials, replacing all the worn parts AND ADDING a factory anti sway bar, and then rebuilding the rear leafs, that was a COMPLETELY different car NONE...

The WORST thing about Marf*ckPharce is the above, plus they never want to give their phone no. I AM SORRY I am DONE with wild goose chases. If I am coming to your place or to meet you I WANT A PHONE contact so I can find out why you ain't there The OTHER (aside from the liberal...

That or a bad connection. Known problems: The instrument cluster harness connector pins get loose, you must solder them to the board traces. Gauge studs/ nuts get corroded, loosen/ tighten the nuts a few times. The IVR can be bad OR THE IVR connector fingers can lose contact with...

Don't they know what they put in there?

All of these girls have two flashers, "somewhere." One is for turn signals, the other is for the hazard flashers

Not very accurately. You can apply a single 1 1 /2V cell to them, and I'll have to look up the expected deflection. But you have some preventive work to do. Can you solder? Clean and inspect around the connector pins. Scrape around the base of the pins, scare up some ELECTRONIC...

Put a meter on the battery and find out. If it is infrequent, wire into something easy, like pulling the wire off the lighter, etc. Could be bad connection, bad VR, bad VR grounding, etc, could be a few things. FIRST thing to do is find out if the charging/ running voltage is stable...

I believe those are the ones that go in like a pistol cartridge. I don't remember the number. 312? 327? These are what they look like, but 327 are 28V EDIT May be no. 330 https://www.jkllamps.com/327 Did you look in your service manual? There are fuse and bulb charts right before the...

So what you are saying is, you had the BLU and BRN reversed at the connector? That starts to explain some of the things you said, maybe. But with the Blue/BRN jumpered, they amount to the same point. So it should not have hurt anything. The check points are: Power at the IGN...