Search results for query: *

Thank you, my biggest concern was having enough lugnut engagement. I have new old Cragar lug nuts that fit the wheels perfectly, and aren't garbage, like the new Cragar lug nuts, imo. I'm not a fan of spacers but they're not making the Sparklers anymore, barely made them when they were.

Looking at spacers for the front of my 67 Barracuda with KH disc brakes. 4.5 bolt pattern and up spacers are easy to find, but I did find these for 5x4, although listed for a VW: 5x4.00 Flat Wheel Spacers Stupid question: How do spacers work, do they require longer wheel studs and the same lug...

Ain't never seen these sbp Keystone wheels, on ebay now. 14x6 with a 5"bs. That bs seems excessive.

Searching for something completely different, found this thread I started in 2008. A lot has happened since then, for one, I solved that hood clearance problem.

Confused again here. Both conical and conical with shaft state they fit 7/16. If you already mounted the wheels with conical nuts, why order conical with shaft style, do both style of nut fit these wheels? Also, one person left feedback that the chrome outer cover fell off immediately. These...

I went to the 25th anniversary and the 30th. Took a ton of pics, still have my unripped tickets, multiple t-shirts, and other stuff. 25th was epic, a blast, imo more people there than the original. Surrounded by woods, people were friendly and helpful, became a muddy mess one day, which was...

I recovered my dash pad, used spray foam to fix the holes, then covered with vinyl. Saved hundreds.

0-5 if it sells before you decide, 5-10 if you're buying it, 10-15 if you ask wiw, and 15-20 if you're selling it.

Stock UCAs? Anyone think QA1 UCAs would rub with a 15x7 4.125 bs?

Got it. Vendors state conical, Cragar states shank, same part#, neither provides matching lug nuts so get conical or conical with shank or shank depending on what's in the box when it arrives. I miss speed shops.

Got a part# for the lug nuts?

Cragar website lists it as Mag. Same part# listed on Summit, shows 14 in stock.

So do these Cragars take conical lug nuts or mag? 1st question on their website, unanswered, 1 year ago.. Cragar 1521912402B Cragar 61C Series S/S Super Sport Chrome Wheels | Summit Racing

Correct. Also 67 trunk floor not repopped. 68-69 trunk floor is which has 2 gas tank straps running front to back. My car with the 67 bb valance and factory correct exhaust. Nice and subtle, looks great, imo.

Bueller, Bueller, Bueller?

The pic I posted was a Scamp or Dart Swinger, iirc. Apologies for any confusion.

I agree this is critical. Pictures will definitely help others provide feedback. One side or both? Don't have to destroy the floor, can remove cross member in sections, just make sure you got all the spot welds drilled out before attempting to force it apart. Having done this without the...

I've seen these seats in a 67 Barracuda and didn't even notice they weren't the matching material to the rear seats. I took pics but cannot find. Below is a pic a member posted here of their car, iirc. Not the greatest pic, but I cropped it. Black Mopar rear seats look very close.

If you're spending additional time & money doing Holley's R&D, and it is still not what you expected, it's far from a great product. I've seen multiple people go through similar situations and, for whatever reason, claim the product/person/company is still great, or worse make excuses for them...

I just did this on my 67. Distance between the bearing and the axle flange is larger on bbp, need bbp brakes. Or, Dr Diff makes BBP axles for SBP brakes, and sells new re-drilled drums. The A-Body axles listed on his website are 5 x 4.5. Also, I found this helpful: Converting rear drum brakes...

For the record, this engine began with dual 390 Holley carbs on the tr, then an RPM intake with a single 750 dp, then dual 600 Holley carbs on the tr, now efi. The single 750 was snappy-er at go than the dual 390s, the 600s was equivalent if not better as it pulled more above 3k. The efi is a...

I was asking about non-led, these appear to be led, but I'm not against trying them. I have led bulbs in the c pillars of my Barracuda for years, no heat, great light, no complaints.

I have a bored 383 w/ 440 Source heads Schumacher headers, no stroker kit, but I went above and beyond on top. 4 speed too. It goes.

What's the best non-led cluster bulb? I've tried a number and they all suck, the smaller regular bulbs in the cheapo 3 pod gauges are 'light' years ahead.

What bulbs, part#, and color option is everyone using for dash bulbs?

I got the same 15% offer, it was only off specific items and had an end date. Useless for the Bilstien shocks I bought. Most if not all companies have gone the same route, here's your crappy $5 reward after spending 10k and it's good for 1 month, or here's 10% off for 2 weeks and a list of all...

Or would I need longer studs if I used 1/4 inch spacers with the 14x6, 4" bs Cragars on the front?

I bought wiring harness tape from Summit but it isn't sticky at all, 1" wide. Twist it at the end, tie it, cut off the excess. Did my entire AAW harness this way, easy, no stick tape is the best.

Anyone running a 14x6 with a 3"bs on the front of a 67-69 Barracuda? If so, what size tire?

Fwiw inexpensive 14x6 sbp chrome reverse wheels are readily available on fb and ebay. Typically with rust, aka even cheaper, a little clean up, paint, they look exactly the same, and you can run a bigger tire.