Search results for query: a500

Came across this pan on a trad. It measures 4.75" deep. I searched the part number but can't find any details. I'm assuming it's an A500 pan but the catalog that I have lists a different part number (see pic). Usually mopar will put part# replaced by part# but I am unable to find it in this...

...yet) Looking for sonnax, superior type parts. Also the heavy duty adjuster wedge and strut for the front band and any/all snap rings as would be in a 904/a500. Whatcha got collecting dust? Not gonna be a race trans, retrofitting into a truck. Just to clarify what kind of "heavy duty" I'm...

Hi. I have now been driving it this summer. Everything works like it should expect for the OD. I have OD and LU on 2 switches. When engage the OD it is slow to engage but when done i can go full throttle and no slip. When engage LU it is instant. What am i missing? SHiftkit is mounted. 1.2...

As I've been told & followed so far an A500 (904+o.d.) only should have ATF+4 fluid, right? Well I'm in trouble now; I'm stuck out of reach for ATF+4 & have to drive the car & myself away from where I'm at & the only trans fluid on the shelves here is normal ATF for some gm product that's been...

...place has it though and PATC doesn't even list it. Other suggestions for sources? I am working on a42RH, but the same number is listed for 904, 998, 999, & all A500. For reference trans parts lists 12878A .063 12878B .075 12878C .081 12878W wavy Thanks for any help or info you can add, Rod

Lets say for reasons I can't remember, I had to modify the tube and dipstick for the 42RH install into a 68 Dart and use the truck dipstick with a A904 tube. I want to cut and engrave new markings on the new dipstick. What is the correct fluid level (running & with pump running) in relation to...

Hi you all. In the process on renovate an 42RH from a dakota 3,9 to put in my car. I have read a lot of threads about the car work needed to be done and finally started. On the gearbox on the left side close to the split right over the colerfitting. Whats it for. Messure pressure. Second i have...

Hi guys I am in need of help with figuring out wiring harness and control of overdrive and lockup for my dads 1989 A500 42RH install. He is just about to have the tranny rebuilt with an Alto red eagle colene performance deluxe rebuild kit and Transgo HD 2 shift kit and Hughes 2500 stall , will...

I installed an RH42 (A500) OD 4 speed automatic in my 1970 Dart. It took some work and fabrication, but nothing terrible. Problem is that these transmissions have a lot of stuff hanging out of the bottom of the trans where a regular valve body would be and then cover it up with a really deep...

I have read a few articles that suggest the overdrive on a 42RH can be rebuilt to be as strong as that on a 46RH. The larger part of this seems down to fitting more clutches and steels. It seems there are different thicknesses of these but also at least 3 different designs of direct clutch...

Looking for a 42RH automatic in the Phoenix Metro area or Arizona in general.

I put an RH42 behind the 318 in a new Dart project (1970). I wanted to keep control of the OD and Lock-up as simple as possible to start with. I ran all three wires from the trans to a box on my console and installed 2 switches from New Wire Marine (Rocker Switch Pros) in the box. I ran the...

I have just bought Sonnax Manual Valve 22771-09 and pressure regulator valve 22771A-02K so that my A500 will fill in park. Anyone know what is involved in fitting these? Can it readily be done with the transmission in the car or do I need to wait for when I get it overhauled?

Need a 42RH/ A500 must have the 3 pin connector for overdrive &lockup. If anyone is going to Carlisle can meet you there. Pm for contact info please. Thanks mike

Anyone know of a more performance kickdown band that is available?

...Dart on the road and have run into what seems to be a transmission issue. The engine is a newly built mildly modified 318 and the trans is an A500 4 speed automatic (based on the 904). I havent even hooked up the electrically triggered overdrive or lock-up converter yet. Just driving it...

Hi, working on installing an A500 behind a 318 with 4.56 gears. From what researched I gathered the standard ratio for the 4th gear overdrive is .69. Did mopar offer vehicles with a better ratio lower than .69? I saw the gear vendors unit is .72 which is higher. Are there any aftermarket gear...

I put a 42 RH trans in my Dart. The factory pan is really deep to contain the additional stuff for the 4 speed overdrive. The plug in the pan sticks out of the bottom of the pan and I finally snagged it on something. It is the lowest thing under my car, just below the exhaust pipes. Does...

I’m looking for all three planetary sets for a 1989 or so A500 transmission as mine have all got some play in them. They are steel cage sets with four planets. I’m in Sweden but you’ll be shipping to Halifaxhops in PA. Thanks, /Anders

I've got a strange thing going on with my A500 trans; if I let go a little on the gas when it shiftes from 2:nd to 3:rd I get vibrations & they become a tiny bit worse when I click on the overdrive & then it stays even when I'm let the car go down slow. But(!) when I keep on axelirating throu...

So as indicated I'm putting an A500 (RH42) into my 70 Dart which originally had a A904. I have a set of new lines for a 70 Dart with a 727 and it seems that the lines are bent in a way that I can use them all the way up to the K-frame. At that point I was going to transition to rubber lines to...

I bought an A500 42RH from a member here and it came with USCT crossmember. Despite studying their web site and talking to folks at USCT I have not been able to find a readily available part number for the trans mount that USCT designed the crossmember to use. They give a part #...

I have a freshly rebuilt A500 4 speed OD automatic with lock up. I'm looking for recommendations for trans fluid for a street car. The only trans kinda like this I have is a A518 in my 97 van and manual says ATF +2... This is a freshly rebuilt unit going behind a relatively mild 318. The...

...a partial list of what's there: 4 door doors Seats Interior trims and parts Many gauges and spares Suspension components 318 Short Block A500 transmission Fenders Radios Tail Lights Headlight bezels Suspension parts Brake Parts It's first come first serve. I have tons of parts and I'll be...

Wanted A500 / 42RH / 42RE Somewhere near Michigan or near i75 between Michigan and Tennessee. Thanks.

I am in the mockup stage of an A500 42RH for s 69 A body. The 1992 Dakota trans lines are not going to work. I am considering changing the fittings out on the trans with some off an A904. My questions are in regards to trans lines from inline tube. They list trans lines with different part...

I need a yoke for a 727 trans or a A500. Mine is from the 904 and won't go in my A500. Thanks.

Can you swap the 904 2.45 1st gear into a A500 transmission??

As the title states, does this look like an A500? It's listed locally, guy says it came out of an 89 Dakota with a 3.9 v6. I'm looking for a core A500 to build and swap in my car, this one is cheap and close but I'm not 100% sure. Appreciate any help you all can provide.

Hey Guys, Jason here...I am a member over on Ebodies.org. I see there is a lot of A500 discussion over here. I am in the midst of an A500 swap on my 74 Cuda, and wondering of you guys could help me out. This is my first transmission rebuild (I know I am crazy, but I love to work on my car)...