Search results for query: *

I have for sale a set of used main caps that came from a 318 engine. They are all in excellent shape and have been cleaned. The bolts that were used on this engine were a mismatched set so I’m just including the correct ones that I found. The oil pump attaching bolts are also included. These...

I have for sale a set of 8 used Silv-O-lite .060 over, cast pistons P/N 1279 that came from a 360 LA engine using the stock 3.58” stroke. Silvolite S1279-060 Silv-O-Lite Cast Pistons | Summit Racing These pistons are clean and come with the matching pins. Each pin was put back with its...

I have for sale, 4 unused NHRA Division 1 event decals for the August 4-6, 2023 Atco LODRS points race that never happened. The track was sold about 10 days prior to the scheduled event so the race was moved to Maple Grove Raceway that same weekend. I would like to get $8.00 for the 4 decals...

PM sent

I have for sale what looks to be an MSD extension cable with 4 different color wires in a plastic covering for the 7AL ignition box. Red for switched power, Orange for coil +, Black for coil –, and White for points or original ignition amplifier. One end has the end connectors to go connect...

I have for sale 2 autographed John Force 8 1/2 X 11 posters from his 1999 season. Both of these are in pristine condition. One is signed by John Force along with his 2 crew chiefs, Austin Coil and Bernie Fedderly. The second is signed by just Bernie Fedderly. I would like to get $20.00 for both...

Done!

SOLD pending receipt of payment. I have for sale a single used United States Standard (USS) thread restoring die. It is a 5/8”-11 thread and is in excellent shape with no issues at all. The OD of the die is 2” and is just under 5/8” thick. I would like to get $3.00 for it plus the shipping...

I have for sale a used G-Force open face white helmet. It complies with the Snell M2005 and SFI spec 41.1 codes and was manufactured on 1-2008. This helmet is an M size. It is an expired helmet for NHRA drag strip use but can certainly be used for other sports that don’t require specific dates...

Any offers?

I have for sale an excellent pair of used rear SBP, 10 x 1 ¾ brake drums that came from a 69 Barracuda using the 8 3/4" rear axle. These drums were the spares for the car in case they were needed. They have never been cut and just show normal wear. I measured approximately 10” in diameter with...

Your inbox is full. $18.40 via the USPS medium flat rate box.

PM sent

I have for sale a complete, used set of SBP, 10 x 1 ¾ brake drums, shoes with all the attaching hardware along with the backing plates that came from a 69 Barracuda. They are all in excellent shape with the drums never been cut. I would like to get $60.00 for the brake parts everything plus...

I have for sale a pair of gently used aftermarket SBP, 8 ¾, A-body axles from Dutchman. These are the stock length 27 11/16” axles, with ½ x 2” screw in studs, OEM adjustable bearings and stock 30 spline ends. These axles were taken out of a 1969 Barracuda so will fit any of the A-body cars with...

SOLD pending receipt of payment. I have for sale a pair of used vented Kelsey Hayes SBP front rotors (no hubs) that came from a 1969 Barracuda. They are used but in excellent shape and have never been cut. They measure 20.574 mm thick with a 20.06 mm minimum thickness. I would like to get $30...

SOLD pending receipt of payment. I have for sale a pair of NEW, never installed 10 X 1 ¾” rear brake shoes. These shoes were originally purchased through Firm Feel back in 2013 but I think they no longer supply them...

I have for sale 6 used bucket seat medallions from a 1969 Barracuda with the deluxe interior. These have very little pitting and can hardly be seen from outside the car. They attach to the bucket seat back. The one picture that shows similar ones in place was borrowed from another FABO member...

I have for sale a pair of NEW, never installed 10” brake drums for the SBP 8 ¾ axles. They use the 2 ¼” brake shoes. https://www.autozone.com/brakes-and-traction-control/brake-drum-front/p/duralast-brake-drum-8754/716241_0_0 The fit the 67-72 A-body cars. I would like to get $50.00 for the...

SOLD pending receipt of payment. I have for sale a new, never used engine oil filter relocation kit that I believe is a Trans Dapt # 1113 Trans-Dapt Performance Products 1113 Trans-Dapt Performance Remote Oil Filter Relocation Kits | Summit Racing It’s complete with all the fittings and...

PM sent

A friend of mine in Hoboken is looking for a 360 for his 70 Cuda build. I passed on the information. Ken Edison, NJ

I have these SB ones for sale if that helps. Ken

I have for sale a few 12V lights for illuminating aftermarket gauges. They all work and have bulbs. Also, I have some brackets that hold the gauges to the mounting panel. The pictures show the gauge mounting stud separation along with the overall width of the mounting brackets. I would like to...

This might be the bracket that you're looking for. Ken

I have for sale 2 D-Link brand, 4 port USB computer hubs P/N DSB-H4. https://www.amazon.com/D-Link-DSB-H4-4-Port-USB-1-1/dp/B000023VUL?tag=fabo03-20 One is new in the unopened, sealed plastic and the second one was used for a short time. These hubs can connect up to 4 USB peripherals or...

I only have the large size. No XL.

For Free! This is the screw that attaches the 5 pin wiring harness plug to the Chrysler electronic ignition box. It’s used but in excellent shape. Just pay the shipping and it’s yours. Ken Edison, NJ

I have for sale a bunch of NEW vintage Turbo Action T-shirts. There are a total of 18 T-shirts. 10 are Large, size 42-44. They are from Hanes, Ebert Sportswear, Jerzees and American Sportswear. 2 are medium, size 36-44 from Hanes and 6 are small, size 34-36 from Hanes and Ebert Sportswear. They...

I have for sale two used reversible screwdrivers with phillips and flat blade bits. One is a Husky #628-375 and includes 1-bit with a #1 phillips tip and a 3/16 in. slotted tip with the second bit having a #2 phillips tip and a 9/32 in. slotted tip. Without the bits installed there is a 1/4 in...