Search results for query: *

Hey guys ,, thanks in advance but I am looking for some rear seat belts for 1969 dart gts, green if possible,, let me know what’s out there

So the repop saga continues,, so I have oer rocker moldings ( from classic industries) on a 1969 dart. New rocker moldings retainers from classic industries … the repops are such poor quality that they are 1/8 inch wider that the retainers don’t even come close to fitting. What’s everyone doing...

Hey guys ,,, does anyone know the modern paint formula for a 1969 dodge dart bayou green metallic ac39ef8 or 43925. My paint store can’t make anything with out a formula??? Tia

Hey guys, I am looking for a set of drip rail moldings for a 1969 Dodge Dart GTS with vinyl top I believe they’re a little bit thicker than the normal ones. AMD does not make any for vinyl top cars. I believe they may be green on the inside of it, but I’m not sure any help would be appreciated...

I am in need of one ( maybe 2 if they don’t match) 69 dodge dart VINYL top sail panel emblem.. I will show what I have for example. Thanks in advance

Hey guys , I am getting to install the gts transverse stripe on the 69 dart.. does anyone know the measurement of the gap between the top and bottom white pin stripes,,, instructions are not that clear Tia you all are awesome!!!

So I am still in need of trim for 69 dart gts, front windshield chrome trim, and rear glass chrome trim ( with vinyl top) want it in real good shape,,, does anyone have any left.. must ship to Iowa 50211

Hey guys ,, my 1969 dodge dart rb engine had a 1 + post and 1 field wire alternator, the replacement from classic industries has 1 + post and 2 field terminals,,, do I just y off the one wire going to alternator fields or do I run it from something else ? I am sure someone has already ran into...

Hey guys,, I was assembling my 1969 dodge dart…quarter glass assembly ( what a pain) But found that when it was disassembled the roller for plate and rear track must have been broken,, it just has one black roller ( needs 2 ) one black and one white,,, I need two or need to find a place to get...

Hey guys, I am looking for a 1969 dart 2 door. Left hand (drivers side) fresh air dust. I am just looking to see what’s available.. photo for reference, TIA

I am looking for more information on my m code dart, the original owner ( Barbara S.)purchased the triple green dart from Grand Spaulding dodge in the summer of 1969,as a college graduation gift to herself. her and her husband lived in southeast Missouri, raced it on the street mostly but...

Let’s try this for the umpteenth time lol…. Hey guys ,,, TIA but I am looking for a 3/8 fuel sender for a 1969 dart w/18 gallon tank,, everyone have the one with the extra 1/4 return line that you have to block off( seems tacky).. I was hoping to find just the single line coming out of the...

Hey guys ,,, TIA but I am looking for a 3/8 fuel sender for a 1969 dart w/18 gallon tank,, everyone have the one with the extra 1/4 return line that you have to block off( seems tacky).. I was hoping to find just the single line coming out of the sender. Let me know what you have or know

Hey guys, Tia , I am ready to order and install vinyl roof,, but not sure on what width is factory? I am getting 2?choices - a 38 seem to seem , and a 43 inch seem to seem,, it’s a gts … any help will be appreciated Also needing one headliner rod retainer clip.. I will show a pic example Tia

I am getting to spray my 69 dart gts, got the wiper cowl at the back of hood,,, I have sanded the grids carefully, while I was sanding, I noticed alot of debris in the fresh air duct I have tried with vacuum,,, no access to bottom.. even when I get clean enough… how do I get coverage in that...

Hey guys, TIA , I need help and advice, I am getting to spray my 69 dart gts, got the wiper cowl at the back of hood,,, I have sanded the grids carefully, while I was sanding, I noticed alot of debris in the fresh air duct I have tried with vacuum,,, no access to bottom.. even when I get clean...

Hey guys any body have home made or bought, the 3 peaces that attach to body,, so I can move dart with out a drivetrain under it. I am looking for 2 that attach to front leaf spring 4 bolt plate and one that attaches to rear k member bolts … thanks in advance

A few parts I am need of at decent prices are a 37 tooth speedometer gear, some transmission linkage return spring, and a near new 3100-3200 stall torque converter for 1969 727 torqueflite,

Working on 69 torqueflite, needing a good separator plate. ( mine has pits) the transfer plate # 2801295, valve body # 2892348. I have a small block torqueflite and it is different..Any help or knowledge would be appreciated as always…

Hey guys, I am looking for an old school pair of American racing or e t wheels ,in 14 inch . Maybe 5 to 6 inches wide…?the hard thing seems to be finding the small bolt pattern… let me know what you got… tia Example shown

Hey guys,, I purchased a reproduction 893 engine oil pan from VANS awhile back..getting to final stages of engine build, but I was wanting to put a 1/2 inch diameter pickup tube .. does anyone know if any company makes one for the 893 pan ?? Tia

In need of a 2863243, lower radiator hose for 1969 m code. Or great equivalent repop. I found the top at mancini, but no bottom. Thanks in advance

Hey guys, thanks in advance.. I would like some info on finding some stock e70 x 14 wsw polyester tires. For my 69 dart,,, and did any m codes come with d70 x 14’s ??

Hey fellow MOPAR junkies, here is a story heard WAY too many times… my body man misplaced my left door latch and rods. Can’t find it.. anybody have a spare or one interested in selling ? Let me know… thanks in advance… you guys are the best

Hey just a couple days into my Route 66 trip, very interesting and fun trip… here’s just a few pictures … Don gave me a good deal on some wheels in St. Louis…thanks fellow MOPAR man… motorheads in Springfield Illinois was awesome!!!!

Hey guys, I will be traveling Route 66 from Chicago to Oklahoma City then down to Waco, Texas next week. So far I have to pick up a couple wheels near St. Louis..I am always looking for parts for the 1969 gts… what do you have… I will be looking… thanks in advance…

Hey, I am looking for a pair ( left and right) of these “frame connecting gussets “ for a 1969 gts. I always called them front body splash shield, but I have been told that is not the correct terminology..mine took a beating when the original owner put fender well headers on.. thanks in advance...

Does anybody have any idea what this may be out of ???? Found in a garage. MOPAR???

Has anybody purchased amd body panels from pro fit interiors,,, they have all in stock and are hundreds cheaper.. but they have a lot of bad reviews and scam warning … anybody have any thoughts???? Much appreciated. Thanks in advance

Want to buy 1969 dart GTS hood Oem , or amd in excellent shape