Search results for query: *

Has anyone had success finding a mini spare to fit 4" and or 4.5" x5 Bolt pattern wheels?

I always struggled changing this spark plug, so I drilled the hole in the inner fender apron, and it works like a charm.

Swapping from hydraulic to solid cam and lifters. The hydraulic pushrod had a few treads showing under the rockers (perfect) Now with the solids too many threads showing.(see pic) I have these Ford pushrods and there is only 1 thread showing adjusted cold with an 016 gap. Should I run them or go...

Ok, so I'm changing from hydraulic to solid cam and lifters. Heads are on so I check TDC with a piston stop confirmed my balancer TDC aligns at TDC on timing cover. Keyway on crank at two o'clock position. Timing gears are dot to dot. What's confusing me is at this setting the valve adjustment...

14 x 7 x 4" bolt pattern 3 3/8" Back spacing. Decent driver quality. One rim has a few nicks as pictured. Asking $500. I prefer pick up but willing to ship if buyer pays shipping.

I have someone dropping a Tranny, driveshaft, and Torque converter Dec. 5th in Atlanta Georgia he's coming from Cali. I Need them picked-up and have brought up to Boston. I'm trying to avoid driving non-stop there and back over the weekend. It's a shot in the dark but worth a try. I can pay you...

I have a 68 Dart that I would like to convert over this winter. I hoping someone has done this and what I may need to do to accomplish this. Not just a button. Proper switch and such. Thanks

I wasn't quite sure where to post this. I need some parts picked up in Tennessee and dropped just North of Boston. Tranny, converter, driveshaft. I'm doubtful but figure it can't hurt to ask.

Is this correct? Uca needs to move back? Why was I thinking forward?

As not to hijack a current thread. Has anyone used an RB Flowkooler water pump with the 440 Source housing? I thought I read about impellor spacing or something not right? Sorry I am brain dead :BangHead:

Looking for a Z-bar frame bracket like the one pictured for my 68 Dart.

I'm looking for a Timken or National inner and outer wheel bearing numbers for my KH disc on my 68 Dart. I can only see 9 and 10 inch drum bearings. Are Disc the same as 10" drum? IDK @hemi71x ? THX

Looking for a good left KH spindle for a 68 dart. Thanks

Are all factory LA rocker shafts interchangeable? Say 273 adjustable or hydraulic shafts? More curious than anything. Thanks

Would this be 3/4-16 ? Going to buy a Bolt, nut and washers for installing my Balancer after removal. Thanks

What vendors are recommended . I see Topsonline. Has anyone used them and what do you think. Convertible Top with Zipper Glass Window | Topsonline.com TIA

I have a 68 Dart 340 / 4 spd. I want to compile a complete list of parts I would need to do a complete swap. I will do the install myself eventually. I want tally up everything I will need as to start compiling all my parts 1st. Looking for advice from previous installers. Thanks

They are throwing out cases of this lubricant. Being the cheap pr*ck that I am, I'm wondering if it can be used for Suspension, U joints, and possibly wheel bearings? Any grease experts out there? file:///C:/Users/ken.crupi/Downloads/GPCDOC_Local_TDS_Kazakhstan_Shell_Gadus_S2_V220_2_(kk-KZ)_TDS.pdf

Anyone running these lifters? No oil groove better? Just curious. Pardon Our Interruption...

I was hoping someone has a source for 15" wiper refills other than Classic Industries for my 68 Dart.. For 2 blades plus shipping I'm looking at $50.! For that kind of coin I could buy these. Yes I'm cheap lol. https://www.amazon.com/Trico-33-150-Classic-Wiper-Blade/dp/B000CPZVTS/?tag=fabo03-20

My defroster hose keeps coming off on my 68 Dart. Can someone send me the clip that holds the hose from a junk vent? Only need it for 1 side. Stole pic from for sale section this morning. Thx

Does anyone have a dash vent clip that helps hold the defroster hose on they can take off a junk vent? Mines missing and causing the hose to come off. I have some vents but there packed away until I move.

I had our machinist at work make me 2 sets of aluminum arms and fabricated a Jig for working on my Diff. 1 set I used setting up my Tundra pumpkin. The other this wekend in my Ragtop.

Anyone interested to trade a Black Grant steering wheel and horn button for my woodgrain type wheel?

I know there are the two types of green bearings for my 8 3/4. Are the snap ring style supposed to be safer or is it just a preference thing? TIA

I'm looking for ideas on speakers and placement areas some have used in their Ragtops. I stole this pic of the web. Has anyone mounted speakers where the arrow is. With the door closed the speaker would get sound to the back seat area and if so, what speaker did you use.. I really cringe at...

So I picked up a Saginaw pump set up for my 68 340 Dart. It's the correct set up from a 68 273 Model. My current TRW pump fits fine but is no good. The steel return hose on the Saginaw pump hits the corner of the head. Has anyone out there ground the corner down to get it to work? Looks like...

I'm looking for the Z bar Frame bracket for a 68 Dart. Similar to the one in this older post. [SOLD] - 67-76 Z bar frame reinforcing bracket FOUND !!!!

I wish someone reproduced the .020 Steel LA 340 Head Gaskets. Like a dummy I put KB flat top pistons with 65cc Eddy heads. I should have at least used 63cc Eddys. I'd like to bump up my compression a bit more. Running Felpro 1008 .039 compressed right now. Really don't want to mill the heads as...

My old neighbor's son has a 2019 Dodge Ram 4 door Longhorn Pick up with only 9 thousand miles on it. I put a new battery in it as it was original and would not come back from a long trickle charge. He has auto start so I told him he should at least start it once a week to keep the new battery...