Search results for query: *

I all, I helping a member with a radio delete plate for his Barracuda, I have deduced the height and width and the post spacing and length but what I can't deduce is the thickness. If anyone has an OEM 67 Barracuda radio delete plate handy would you PM me so I can get the dimensions I need to...

Hi all I'm looking for 5 or more A Body LH front disk lug studs Kelsey Hayes 67-72 I would prefer NOS or NORS but good used might be ok for the right price I know I can get right hand studs new. I'm just weird, I love the LH lug studs!

I bought a rebuilt single pot master cyl and some lines and fitting to pop some caliper pistons out of a KH caliper. I would rather not use brake fluid due to its paint eating characteristics (ask my sister how I unknown this) I have a bottle of Jack oil I'll never use so i figured it would...

I'm missing a bottom leaf from my spring pack One of the bottom (smallest) leaf from a 2835056 (68 Formula S) leaf pack is hanging out with a sock somewhere. My media blaster has given up trying to find it. Let me know what you have. I would entertain a bottom spring from a different pack as...

1966 Dodge a100

I know it has been asked (and I have asked) and I have searched and found several examples of dimensions, here on FABO and one the net. BUT... None have certain crucial dimension Many are not from a KNOWN OEM front fender The reason I'm being so picky for KNOWN OEM fender is there are so...

My wife and I are looking to relocate to someplace where my 67 Dart convertibles can be happy in a large shop. We have seen several properties in the Kimball, and Scottsbluff areas. I'm looking for first hand accounts of what it is like living there in this decade. Weather? Hail, Snow, Wind...

So @charliec had a dilima, reuse his steering shaft that showed signs of having been molested or replace it. As luck would have it I had an unmolested steering shaft for the application and I have always wanted to cut apart a steering shaft. So we agreed to swap shafts, I paid postage to him...

LAST CHANCE..... IM MOTIVATED It goes to scrap soon. :( I have a Dana 60, series 3 Powr-Lok Differential I would like to sell or trade for a 8 3/4 Clutch type Sure Grip (NOT a cone type Sure Grip) Asking $100 (OBO) plus shipping from 80526. Unit weight is 41 lbs (add 5 lbs for box and...

I got a Tire Iron in a parts deal and don't know what it is for. Head to tail is 21-3/8" Fits on lug nuts on 7/16" studs Measures about 3/4" across opposite flats in the nut end $10.00 plus shipping from 80526 Paypal or Zelle Iron on right is 67 Dart for comparison

I'M MOTIVATED - as marked or BEST OFFER All parts were rescued from a wrecking yard that has been crushed out. I'm not selling them to make money, I just couldn't see them get crushed. If I break even I'll be happy. I prefer PayPal or Zelle All items ship from 80526 Claim by description...

---NEW LOWER PRICE, OBO--- I'M VERY MOTIVATED!!! 66 A body (also interchanges with 66 & 67 A & B body) The seat base is the same part number 66 & 67 A Body, and 67 B Body (may also be the same for 66 B Body) The backs interchange 66 & 67 A Body, and 67 B Body (may also be the same for 66 B...

THIS IS NOT A SALE AD NOR A FISHING EXPIDITION. I DO NOT HAVE ANY TO SELL AND I HAVE NONE IN THE WORKS! Factory Heater Delete Fresh Air Vent for the passenger side of 63-76 A bodies (stock photo for identification) THIS IS SIMPLY to get a feel if there is enough interest at the expected...

Ebay dash Bezel red is a missing tab

I filled up today and thought I would share. I have a 70s OEM supersedes fuel sender (the one that is shaped like the aftermarket ones) in my 18 gallon tank - 67 Dart. The gauge needle was exactly 1/2 way between 1/4 and 1/2 tank or 3/8 3/8th of 18 gallons is 6.75 gallons in the tank 18 -...

Hi all, I'm looking for a set of 67-68 Dart GTS Fender Letters. They can be in rough shape for the right price. I need them to mark out the holes on the fenders so having the posts or at least most of both post on each letter is needed. I would prefer OEM but aftermarket that are hollowed out...

I CADed up the connector and had some made in Nylon 12, BUT I don't recall who needed it? Will the real requestor stand up!!! (or anyone else who needs one)

I'm still have an issue with reactions in PMs When I click on a reaction icons I get this as a result of pressing on one of them. (PC and Android) Anyone else having this issue. @Joeychgo

Hi all, I reverse engineered the MAP LIGHT Bezel and printed it in Aluminum and Stainless Steel. I need someone with an OEM dash that has an OEM MAP LIGHT (or ANTENNA) who is willing to test fit the bezel. I'm looking for: Does the locating post fit in the dash hole properly Is the...

---NEW LOWER PRICE, OBO--- I'M MOTIVATED!!! 66 A body (also interchanges with 67 A & B body) The seat base is the same part number 66 + 67 The backs interchange but do not have the provisions for a head rest that a true 67 has. All parts have been primed after professionally media blasted /...

Not a bad Mopar turnout 3 blocks and about 300 cars 19 mopars At least the A bodies got some recognition.

It's always good to be the only Mopar!

I'M MOTIVATED - as marked or BEST OFFER All parts were rescued from a wrecking yard that has been crushed out. I'm not selling them to make money, I just couldn't see them get crushed. If I break even I'll be happy. I prefer PayPal or Zelle All items ship from 80526 Claim by "crusher #2"...

---NEW LOWER PRICE, OBO--- I'M MOTIVATED!!! 66 A body (also interchanges with 67 A & B body) The seat base is the same part number 66 + 67 The backs interchange but do not have the provisions for a head rest that a true 67 has. All parts have been primed after professionally media blasted /...

Unknown Jack base. Media blasted. $5.00 plus shipping from 80526 PayPal or Zelle

I'm looking for a photo of the OEM seal, I know I have one in my hoard but searches has not turned it up. I forgot the vent mounts different than the heater box, so I'm looking for heater box seal photos Thanks

I believe it is 7620 and came from a 60s Furry drive shaft. Update.... Tube OD is 2.75" inside between the flats of the u joint ears is 2-1/8" Cup ID is 1-1/6" Weight is 7/8" wide x about 5" OD $10.00 Plus shipping from 80526 Paypal or Zelle

I got a Tire Iron in a parts deal and don't know what it is for. UPDATE... Head to tail is 21-3/8" Fits on lug nuts on 7/16" studs Measures about 3/4" across opposite flats in the nut end $10.00 plus shipping from 80526 Paypal or Zelle Iron on right is 67 Dart for comparison

Hi All, I found a Barracuda (67-69 I believe) jack head and pole in my search for a 67 Dart jack. (I already have the 67 Dart hook, base, spring and tire iron) I just need the jack head and pole. ---I will entertain other than trade offers--- This post has interesting info 67 to 69 Barracuda...

Updated with photos and videos NOTE: This review is just that, a review. I show the good and the bad and my satisfaction with the product. I'm not bashing the manufacturer (unless their product sucks) just stating facts and comparing an OEM part the the reproduction. In an attempt to get my...