Search results for query: *

Looking for a driver quality rear bumper for a 70/1 duster. 72 will work just prefer not to have the jack holes. Need something fairly local since shipping will kill any deal on something that size/weight. Got something in SoCal near 92860? Let me know. Thanks in advance.

Like the title says. After a pair of factory 15x7 steel wheels with 4.25 backspace, BBP. Will consider cop steel but prefer the plane Jane steels. Close to 92860 so I don’t have to pay and arm and leg for shipping. Thanks, Chris.

Bought the mounts off a member here. Ended up selling my 6.4 and keeping a big block in the car. Used for mock up only. All hardware included. Asking $250 plus actual shipping or pickup in SoCal 92860.

One pair of 660s. Need to be soaked, stripped and gone through. Linkage moves freely. One has damage to the vent tube insert, one has the choke horn milled off and the other doesn’t. Ended up with two pairs of 660s and only need one set. Velocity stacks NOT FOR SALE. Can get more photos if...

Used pair of PST Gmax control arms. Went to all QA1 front end parts. Some chipped powder coat, markings on the bushings but worked fine. “Big” ball joint arms. Asking $200 plus actual shipping costs. If you’re in SoCal you’re more than welcome to pick them up.

Used but in good shape. Was on my old motor. $100 picked up in SoCal 92860

One pair of PST G-Max tubular uppers and a pair of magnumforce 2” drop spindles. (MFR192000) . Were on the car for +/- 200 miles. Some chipped powder coating and scuff marks on the bushings but worked fine. Only removed to install all QA1 parts on the car. They are big ball joint uppers...

Looking for a complete rear bumper bracket set for my duster. Pictures, price, shipping to 92860. Thanks in advance.

Looking for a decent shape 833 (non OD) for my duster. Slowly gathering parts to convert it from auto. Want something local in SoCal to save on shipping. Got other parts to swap an auto car to manual? Let me know. Thanks in advance, Chris.

Was saving this for the duster project, but decided it needs an a833 instead. Continental convertor what I do know about it. (From Pete who worked at continental) Aluminum hi stall stator Completely furnished brazed Neutral Balanced Roller Sprag. Came out of a buddies 340 duster that ran high...

Still sealed never opened trans go TF-2 kit. Asking 65 bucks. Located in 92860.

One back braced 8.75 housing and stock axles. Not sure what it’s out of, came with a pile of parts I got. Someone boogered the perches and had it in a duster allegedly. Asking $125 since I have to put a price on it. Pick up in 92860. May have a pair of 10” drums/backing plates I can toss in...

I have a factory 971 oil pan, windage tray and pickup. Sump is dented and the windage tray is tweaked but it’s all there and usable. Tried my best to keep it all flat when removing from my spare motor but someone used gorilla glue or concrete to install the pan. Asking $150 obo picked up in 92860.

One front pair of 18x5 2” backspace, race star wheels. New, but missing the caps and have some minor scuffs from being moved around. Asking $250 local pickup preferred. Located in Norco Ca 92860. Possibly attending Fall fling in Van Nuys and could deliver with a deposit. Thanks, Chris.

I got this setup in a whole lot of parts recently. Mostly complete but definitely needs to be restored. At a glance it’s missing two bolts for the brake hose bracket, one spindle nut, one dust cap and the hardware for the dust shields. Otherwise complete. Rotors should be replaced. I’m not...

So far in my searching I’ve found 1.007 and 1.017 for the stock rod widths in an RB. I’m gonna ASSume one measurement is correct and the other is not. Does anyone know the actual width? Thanks in advance.

Like the title states, need a Vertigate shifter mount for an A body. Thanks in advance.

So this just came into my possession today, DC crank trigger. Ballast resistor and other parts packages show 1972, the instruction manual shows 1975. What’s everyone got for old school cool stuff that has survived time?

Long shot but I need a sun pro temperature gauge. Mechanical with the part number C700-110-32. I don’t have the number for the oil pressure gauge but you’ll know if you have both. I don’t want something from the titanic. Would prefer both gauges but will settle for one and track down the other...

Slowly gathering parts for a four speed swap and need a pedal setup. Prefer the HD setup. Photos, price + shipping to 92860 would be great. Thanks, Chris. Yes, there’s overpriced setups on flea-bay but I’m not interested in those.

Just want to say thanks to @gzig5. I originally wanted to buy his tunnel ram about a year ago and let’s just say, life happens. Messaged him recently and he stuck to the original price plus shipping like we originally agreed upon. To say it was packaged greatly is an understatement (no photos I...

Custom built 15x8 cragars with 5” backspace 5x4.5” bolt pattern. Never been on a car or had tires on them. Have both center caps and lug nuts for them. Prefer not to ship. Only have one box. Would like to get $450 for them, will entertain reasonable offers. Located in Southern California 92860.

Need a pair of 73 and up A body disc brake spindles. Spindles only. Preferably SoCal to save on shipping. If you got a pair and you’ll be at the spring fling Saturday even better. Let me know price/location. Thanks in advance, Chris.

Nice pair of small block MT valve covers. Need a cleaning but otherwise great shape. Asking 125 plus actual shipping or pickup in SoCal.

So recently I pulled the billet convertor out of my car. Had maybe 20 miles on it over the years. Reason I pulled it is I went with a turbo setup and on the dyno it drove right through the convertor. On the street the few times I drove it, the 2-3 shift there was ZERO rpm change. New convertor...

Anyone got a reasonably priced LA tunnel ram laying around? Preferably in SoCal? Pictures and price if you do, thanks.

Looking for a rear seat for a 70 duster in SoCal. Maybe you got one and you’re heading to fall fling? Have the top half but will buy both halves if necessary. Color not important.

So who runs one? Any setups to avoid? Did you see a reduction in coolant temperature? Main reason I’m looking at an oil cooler is for a reduction in coolant temps. Packaging is an issue with my car but hoping someone can chime in on if it’s worth the effort or not. As always, thanks in advance.

Need a rear seat for my duster (top and bottom) dark blue preferably but I’m not picky, mainly need good frames. Located in 92860 and would like something close. Thanks in advance, Chris.

Are the shifters all physically the same? I’m assuming it’s just the mounting plate/rods/etc that’s different from vehicle to vehicle. Have my eyes on a V gate to stash for my duster and want to make sure before I scoop it up. I know I’ll need the correct mounting plate and rods but thought I’d...