Search results for query: *

Good used condition. It does have 2 of the 8 mounting studs missing, but, they're on opposite ends, so, it will still mount tight. It's a pretty rare panel, so, get it while you can! $25 picked up her in San Diego, or, I will ship it to a 1st 48 state U.S. address on your dime. I take cash or...

This is for a manual tailgate. Part number 2161599. It fits a '60-1 Plymouth Valiant, '61 Dodge Lancer, as well as some '57-61 Dodge, Chrysler, Plymouth, and DeSoto model S.W.'s. I'll give you guys first crack at it before I post on the FCBO site. $20 picked up here in San Diego with cash or...

An NOS Mopar factory A/C temperature control switch for '65-6 A-body models. Part number 2521642. $85 picked up here in San Diego with cash or Venmo. Add $15 for shipping and $4 for PayPal unless you use friends and family. I ship to U.S. addresses only.

Does anyone reproduce the C.A.P. (Cleaner Air Package) decal for a '66 model? I can't seem to find one anywhere. @65dartcharger Ulf?

I bought this Authentic Restoration Product from Quanta for a project I'm working on. Nice made in USA part. Well, I must have bought the wrong one, as it's a bit too long for my application. I went by my '66 parts manual which shows a 2658776 as being correct for my 273 without A/C, but, too...

Does anyone know a source for restoration quality radiator hoses for our 64-6 273 A-bodies without A/C? The Gates lower hose 20386 fits fine, but, the Gates upper hose 20416 doesn't fit very well. It works, but, doesn't have the correct bends, so, you have to deform it a bit to get it to work. I...

Anyone have a '66 A-body that still has a sure grip instruction sticker? I'm trying to determine if they used one that year, and where it was placed. Maybe on the trunk lid next to the jack instructions?

This NOS P/S belt fits various small block with A/C applications, so, do your own research to verify it fits yours. It has the "Mopar" logo. $35 picked up here in San Diego, or, $59 delivered (including PayPal fees) to a first 48 state U.S. address only. I take cash and Venmo in person too. A...

Anyone have a good photo of how the power steering hoses are routed on a '64-6 A-body with a 273? This thing was a basket case when I got it and all my other '66's are manual steering. Trying to keep the hoses away from the exhaust manifold the best I can. I have the correct pump, fittings...

Is there a company out there that makes reproduction radiator hoses with correct look and part numbers for our '64-6 A-body 273 engines? I can modify a Gates or Dayco hose, but, if someone reproduces them already, I'd rather go that route. Thanks, Mark

A nice used license plate light for a 1965 Dodge Dart. A couple of minor scuffs in the lens, otherwise in excellent shape. $35 delivered to a first 48 State U.S. address only, or, $25 picked up here in San Diego. I take PayPal and Venmo or cash in person.

Part number 2240319 NOS Mopar chrome gas cap made for the '60-1 models, but, will fit the '62-6 models also if you don't need the handle to be horizontal once installed. The clocking of the handle is the only difference. $40 picked up here in San Diego, or, $53 delivered to a first 48 state U.S...

Here's a pair of outer taillights for a 1966 Dodge Dart station wagon. The LH one has a hairline crack in the lens, and both will have some pits in the chrome, but, the color in the lenses are good. The housing and wiring pig tails are in good shape too. Not easy to find them these days, so, get...

A pretty decent dealer tag from Bill Crouch Chrysler Plymouth in Englewood-Denver Colorado. It has some pits in the chrome, but, not terrible. Kind of a nice item to have if your car was sold there. I'm not sure when this tag was used exactly. He was the owner starting in 1963 and died in 2014...

Part number 2809111, and the number actually on the lens is 2853009. No gasket, but, nice restoration quality lens. $65 delivered to a first 48 state U.S. address, or, $45 picked up here in San Diego. PayPal add $3 unless you use friends and family. I also take Venmo and cash in person.

This is a used passenger side taillight assembly for a '63 Dodge Dart station wagon. Not show quality, but, decent for a driver. The color is good. Some hairlines in the lens and minor pitting in the chrome. The rubber gasket is not very good however. $75 delivered to a first 48 state U.S...

This isn't something you can find very often.....an NOS Mopar A/C drier. If you have a '64-6 factory A/C Dart, Valiant, or Barracuda, this is a great restoration and/or 134A conversion part. It still has the caps on the fittings. The part number is 2521374. $245.00 Delivered to a first 48 state...

This fuel gauge doesn't work and comes with absolutely NO GUARANTEE that it, or any part of it, does. It came out of a '67 Barracuda. Not sure why it doesn't work as I didn't need it for my car and never diagnosed it. I figured someone would probably want to play with it, or, maybe just use the...

I have a few used '65 and earlier speedo gears for sale. The three on the right have 17 teeth, the middle two have 18 teeth, and the one on the left has 19 teeth. Not sure why the colors are different on the same teeth count. Maybe manual vs automatic? I don't know, so, if you have any...

This is a good used low miles Mopar fuel sender for an A-body, not an aftermarket Chinesium one. Fits most models, but, may need calibration with your gauge to fit all applications. The number stamped into the part is 4051003. $90 delivered to a first 48 state U.S. address, or, $75 picked up...

If you own an early A-body (and even some B-bodies) station wagon with a manual tailgate, you will need this part sooner or later. Being some version of aluminum/pot metal, they can and do wear out. This is the part that goes between the crank handle for the window, and the actual window...

Not an easy part to find when you need one. I figured to post it here instead of the Interior section, but, if I'm wrong feel free to move it! :lol: It came out of a '64 Dart, but, it will fit all sorts of '63-4 Mopars, including Valiant, Barracuda, Chrysler, Dodge, Imperial, Belvedere, Polara...

Fits all '65 Dart models except the wagon. Some minor scuffs and hairlines in the plastic lens, but, otherwise in great shape. $30 picked up here in San Diego, or $43 delivered via USPS priority mail to the first 48 U.S. states only. I take PayPal or cash and Venmo in person.

Part # 2240319 in the factory Mopar box. It's correct for the '60-1 models, but, will fit the '62-6 models and work just fine. The difference is the handle clocking. On the '62-6 models, the handle will be at an angle instead of horizontal like it should be once installed tight. $40 picked up...

This is a used chromed pot metal emblem that Skyline Dodge would have attached to your trunk lid or tailgate if you bought a car from them. It's pitted and hairlined as most are, but, it's not broken. If you collect these emblems, have a car that was originally sold there, or just like it for...

This is a used dealer installed metal plate that they usually screwed onto your trunk lid when you bought a car from them. It's a bit pitted and hairlined as most are, but, it's not broken. If you collect these things, have a car that was bought there, or just like something for your man cave...

Here's a pair of NOS Mopar lock knob escutcheons for '68-76 models. Part #2862309. $20 delivered via USPS to a U.S. address in the first 48 states only. AK and Hi just ask for a quote. Pick up here in San Diego ok too. If you need more than 2, add $15 pair up to 10 total. PayPal add $2pr. unless...

Part number 2579949 original NOS Mopar part. $75 plus $4 PayPal fees (unless you use friends and family), and $10 shipping via USPS to a first 48 U.S. state address only. Local pickup from here in San Diego OK too.

A good used grille emblem for a '66 Valiant. There is some pitting on the outer edges and the paint needs to be redone, but, it has all the mounting posts and nuts to install it. Of all the ones I've seen lately, it's in much better than average condition. The casting/part number is 2579902. $25...

This lens is NOS, but, damaged. There are some minor scratches and scuffs from not being in a box, and there is a chip out of one edge (missing and not included) as you can see in the photo. No gasket either. The number on the lens is 2243054. I would imaging you could glue a chunk from an old...