Search results for query: *

I have a 2001 Jeep Wrangler TJ 60th Anniversary Edition. 4WD 4.0 inline 6, 5 speed manual A/C, Power steering, power disc brakes. 4 new tires Approx. 200k miles. Comes with the factory hard top as well. Recently replaced tune up parts, (spark plugs, coil packs, etc.) Frame and undercarriage is...

Two 2001 V8 4wd Dodge Dakotas. The two tone truck is a low mileage (100K) 5.9 liter V8 magnum truck. It has a great drivetrain, excellent interior, and very good tires. Unfortunately, it spent too much time in New Hampshire, and the frame and body are badly rusted. The other truck is a 4.7liter...

I have a 1977 Adventurer with the Warlock package. 360 two barrel, Automatic A/C PS PB. Still has the tuff wheel, original mags and bucket seats. Pinstriping is still visible on the dash, but previous repaints have obscured the rest. This is a restoration project, needs everything. I bought...

Tach was working when I removed it from a camaro. I don't know about the shift lite, I never drove the car it was in to find out. Appear to have a bulb holder missing from the front. I would like to sell for a reasonable cash offer or trade for a set of cast aluminum magnum valve covers or a...

I have a 1956 Chevrolet 210 sedan for sale. This is a roller, no engine, trans or title. It was a 6 cylinder/powerglide car. It has rust in the usual places and needs floor pans and trunk floor. The frame is solid and the dash is uncut and even has the original radio. The windshield is cracked...

I have a Holley performance 4bbl carb, unknown CFM, a little dirty from sitting on the shelf but would clean up nicely. Electric choke, vacuum secondaries. I bought it secondhand a while back and never used it. $125 plus the ride to you. I accept and prefer Paypal. Would also trade for a...

I have a Holley performance 4bbl carb, unknown CFM, a little dirty from sitting on the shelf but would clean up nicely. Electric choke, vacuum secondaries. Want to trade for a rust-free passenger fender or door for my 71 Dart swinger. Located in South Carolina. Please PM if interested.

I have a brand new header new in box with gaskets and hardware, it is dual outlet. It was bought for a 2000 Jeep Grand Cherokee, but never installed. I would like to trade for a 4bbl magnum intake for my magnum swap into my Dart. Also interested in a air-gap style fuel injection intake for my...

I am planning a 5.2 magnum swap. To install the 360 car pan on my 5.2 magnum, do I need the 5.2 magnum gasket or the 5.9 magnum gasket? I thought the all the magnum pan gaskets were the same, but there are different part numbers for the gaskets....

One set of 383 exhaust manifolds, I took them off a 67 Fury 383. No known cracks. I don't have any big blocks any more so I have no need to keep them. Asking $100 for the pair + the ride. I can accept Paypal and prefer it. Please send me a PM if interested.

One set of 383 exhaust manifolds, I took them off a 67 Fury 383. No known cracks. I don't have any big blocks any more so I have no need to keep them. Asking $100 for the pair + the ride. I can accept Paypal and prefer it. If you like to trade, I am looking for a manual steering, column shift...

Had these sitting around left over from another project. NOS tail lights. The chrome is bright an new as well as the wood grain, and the lenses are clear and color is bright. One of the lenses has a crack (shown in the picture). The inner light is very nice, looks like something was glued on the...

I would like to know if any one has experience with using a power column with a manual box. I know that there is a "shaft within a shaft" design with some plastic rivets designed to shear an allow the column to collapse in an accident, so is there enough length on the shaft to extend it...

Is anyone running an in tank fuel pump spliced into the original a-body fuel pickup? Or any other mounting options to put a pump in the original tank without cutting/welding the tank? (other than buying a fuel injection tank from Tanks, inc.)

Anyone got a bare 73-up 318/340/360 K-frame just gathering dust? Doesn't need to be show quality, just structurally sound and not bent up or cracked. On a restrictive budget so hoping to stay in the $75-$100 range . I am located in South Carolina. I can pay with PayPal. Please reply by PM so I...

A lot of emblems, mostly Mopar, some of various manufacturers approx. 35-40 emblems. Want to sell the lot as a whole asking $25 for the lot. Paypal accepted and preferred . Shipping would be about $6.50 to lower 48. please PM if interested.

I have a set of aluminum rims 5X4-1/2" bolt pattern came off jeep they will fit mopar with LBP. Would sell for $100, but would prefer to trade for a set of plain steel 15" rims with the same bolt pattern with useable tires. Also willing to trade for other parts I may need for my 71 Dart. Due...

Looking for A-body parts car in the Greenville, SC area. Looking mostly for 70 -up, as more parts would be useable for me. If anyone has one please PM

Looking for A-body parts car in the Greenville, SC area. Looking mostly for 70 -up, as more parts would be useable for me. If anyone has one please PM

1975 Duster rear light harness in good shape, uncut. Asking $30+shipping. I accept and prefer Paypal. Please PM if interested.

Holley 1850 600 CFM vacuum secondary electric choke with electronic mixture control. Comes with everything pictured, the wiring ,extra mixture solenoid, control box, extra gaskets. Again, it is dirty and dusty from sitting on the shelf, needs cleaned out. It was on a 67 Fury 383 when I got it...

I have a Sony CD player with remote and a Pyramid 3 00 Watt amp. includes fused power lead and cables as pictured. All in working order, was in a truck I bought, I just pulled it out because I wanted something different. Asking $100 +shipping Please PM if interested.

I have for sale a 2000 Dodge Ram 1500 with 5.9 magnum V8 and automatic trans. Rust free southern truck with Air conditioning. I bought this truck recently from a local person needing cash. I am not familiar with the history of it, only know what I see. Here is a link to my CL ad with more...

Looking to trade for parts for my 71 swinger project. I have a very cool 1930's-1940's? Black and Decker valve grinder that I am ready to part with. The motors ran when I bought it. I had plans to clean it up and paint it, but that just hasn't happened and I would rather work on the Dart. The...

I have a very cool 1930's-1940's? Black and Decker valve grinder that I am ready to part with. The motors ran when I bought it. I had plans to clean it up and paint it, but that just hasn't happened and I would rather work on the Dart. The machine has cool brass nameplates, it may very well be...

Anyone got a bare 73-up 318/340/360 K-frame just gathering dust? Doesn't need to be show quality, just structurally sound and not bent up or cracked. On a restrictive budget so hoping to stay in the $75-$100 range shipped. Located in South Carolina. I can pay with PayPal. Please reply by PM so I...

1975 Duster rear light harness in good shape, uncut. Asking $30+shipping. I accept and prefer Paypal. Please PM if interested. If you prefer to trade, I would gladly swap for some small parts I need for my 1971 Dart Swinger. (such as armrests, trunk lock, plastic glovebox liner, defrost...

Had these sitting around left over from another project. NOS tail lights. The chrome is bright an new as well as the wood grain, and the lenses are clear and color is bright. One of the lenses has a crack (shown in the picture). The inner light is very nice, looks like something was glued on...

One set of 383 exhaust manifolds, I took them off a 67 Fury 383. No known cracks. I don't have any big blocks any more so I have no need to keep them. Asking $100 for the pair + the ride. I can accept Paypal and prefer it. If you like to trade, I am looking for a manual steering, column...

Edelbrock 1406 600 CFM electric choke carb. Dusty and dirty from sitting on the shelf, it needs a good cleaning/polishing and probably a kit. Asking $85 +shipping Holley 1850 600 CFM vacuum secondary electric choke with electronic mixture control. Comes with everything pictured, the wiring...