Search results for query: *

So...long shot. I had a 69 Dart GT Convertible that I had been working on through out college. Long story short - life happened and I had to sell it. Fast forward to present time - at a place now where I can actually have a project car to work on/tinker with with the kids. It would be super...

So, I've been doing a lot of reading and research on this matter and am posting this here because of the vast wealth of knowledge FABO represents I know I'll get a lot of good input O:) I've found a solid bodied (non-running) small block late Ramcharger with the fully removable hard top. Plan...

I had a 69 Dart GT Convertible. Bought it in 06 and sold it Fall 09 (I believe). Getting ready to graduate pharmacy school and wanting to get another vert project and got to thinking about where my old car was. I know the guy who purchased it from me flew up to Boise Idaho and drove it home...

A skinny little guy goes into an elevator, looks up and see this HUGE guy standing next to him. The big guy sees the little guy staring at him, looks down and says: "7 feet tall, 350 pounds, 20 inch private and 3 pound testicles, Turner Brown." The little guy faints and falls to the floor. The...

I had been posting up individual listings but realized that wastes more time and space for everyone, so I'm just starting this listing. Like the title says, it was a 4 door dart that had PS, PB and A/C. PM me with what you are interested in. I'm in Nampa, Idaho.

Any other home brewers out here? I just bought a home brewing kit and have been reading up on how to do it for a while. I think I still need a couple more things, but am excited to get started. Do any of you other home brewers have any tips?

These are the hubcaps off of my 73 Dodge Dart 4 Door. They look good, just dirty and could use a good scrubbing. $50 + shipping from Nampa, Idaho. I have lots of parts left over from the 73 Dodge Dart. It was a pretty rust free 4 Door 318/904 car with power steering, brakes and a/c. Let me...

This is the black dash pad out of my 73 Dodge Dart 4 Door. It does have some cracks in it (see picture). $25 + shipping from Nampa, Idaho. I have lots of parts left over from the 73 Dodge Dart. It was a pretty rust free 4 Door 318/904 car with power steering, brakes and a/c. Let me know if...

This is the radio/heat controller dash bezel out of my 73 Dodge Dart 4 Door. As you can see from the picture, it does have some paint pealing on it. There were a couple of mounting tabs broken on the back, but it didn't affect how well it mounted (they were all broken before I removed it, and it...

I think these are called b pillar trim (on the outside?). They are chrome and in good shape. A little cleaning/polishing and they'd look excellent. Around the screw mounting holes, there is a little surface rust but nothing major or anything that would be tough to clean up.These are off of my 73...

These are the green kick panel trim out of my 73 Dodge Dart 4 Door. They are in good shape, a good cleaning wouldn't hurt. As you can see from the pics, the driver side has the insulation but the passenger side does not. $40 + shipping from Nampa, Idaho. I have lots of parts left over from...

This is the green under column trim from my 73 Dodge Dart 4 Door. It is in good shape $20 including shipping from Nampa, Idaho for those in the lower 48. I have lots of parts left over from the 73 Dodge Dart. It was a pretty rust free 4 Door 318/904 car with power steering, brakes and a/c. Let...

These are the green A pillar trim out of my 73 Dodge Dart 4 Door. They are in good shape, a good cleaning wouldn't hurt. $40 + shipping from Nampa, Idaho. I have lots of parts left over from the 73 Dodge Dart. It was a pretty rust free 4 Door 318/904 car with power steering, brakes and a/c...

This is the instrument cluster out of a 1973 Dodge Dart 4 Door car that I'm getting rid of some parts from. The cluster is in good shape. $35 + shipping from Nampa, Idaho. The car was a small block (318) a/c, power brakes, power steering car that I still have a lot of parts off of that I'm...

This is the steering wheel and column out of a 73 Dodge Dart power steering car. PM me with any questions. $100 + shipping from Nampa, Idaho.

This is the power brake set up out of a 73 Dodge Dart with a 318. I was told the master cylinder was bought new (maybe rebuilt?) and never installed. I imagine it will work with different years/makes. $100 obo +shipping from Nampa, Idaho. I've changed direction with my 73 4 Door Dart...

This is the power steering pump and bracket out of a 73 Dodge Dart with a 318. I imagine it will work with different years/makes. $40+shipping from Nampa, Idaho. I've changed direction with my 73 4 Door Dart project so I've got lots of parts for sale, PM if you are looking for anything. RTom

These came out of a 73 Dodge Dart, not sure what else they would fit in. The passenger side is green and the driver side is blue. Both are in good condition but could use a good cleaning. They come with the mounting screws as well. $10 each plus shipping from Nampa Idaho. I have other parts I...

This is the transmission crossmember out of a 73 Dodge Dart 4 door. The transmission was a 904. I believe this is the same cross member for various years, but don't remember for sure. I'm asking $50 + shipping from Nampa, Idaho. I'm slowly trying to get a bunch of parts I'm not using listed...

This is the locking gas cap and key off of a 73 Dodge Dart 4 door. I'm asking $20 shipped from Nampa, Idaho to the lower 48 (will ship elsewhere but there may be a charge, PM if you need a quote) I'm slowly trying to get a bunch of parts I'm not using listed from a 73 4 Door Dart (power...

This is the radio out of a 73 Dodge Dart 4 door. The previous owner had removed it before I got it so I can't guarantee that it works, but was told that it did. As you can see from the pics, it is in good shape and no wires were cut to remove it. I'm asking $30 + shipping from Nampa, Idaho...

This is the under the dash a/c floor vent out of a 73 Dodge Dart 4 door. As you can see in the 4th pic, there is a crack in it, but I was unable to see it while being mounted and didn't seem to affect the integrity of it. I'm asking $40 + shipping from Nampa, Idaho. I'm slowly trying to get a...

So, I'm in the beginning stages of building my 1st Gen Dodge Crew Cab Long Bed rig. I don't have a whole lot of money to play with (just had our first baby) and am trying to keep costs down as much as possible. It also won't be a daily driver, but will still be driven frequently. I had figured...

Does anyone in or around the Boise area know of a good painter who isn't super expensive? I am in the process of converting my 90 Extended cab W250 to a crew cab and would really like to be able to get some paint on it before it all goes back together. Thanks for any input!

I've been looking all over for a 81-86 Dodge Crew Cab body ( don't really need and engine or transmission). I've been having a hard time finding any relatively close in good condition. I figured I had always had good luck on here with my Darts in the past, so I'd give it a try here. Any tips or...

Hey guys, I know it is not an A-body, but I figured you guys would be the best place to check. I just bought this pick up the other day and, considering the price I got it for, it was one helluva deal. The only problem is the lever to lean the passenger side seat forward (so you can get...

I'm trying to locate some parts to help my Dad get his 67 Dart GT Convertible back on the road. Right now we are looking for a transmission crossmember ( for a 67, I know that there is another one that has the holes the wrong distance apart ) and the tailshaft for a 727. Since my wife and I...

So, I just picked up the 78 Dodge Power Wagon from jeff (Jeffthemarine). I'm looking for some places to get some good info ( whether it is on here, or another good old dodge truck forum). I'm needing to at least replace the front wheel bearings now but, eventually, I'm wanting to switch it...

Today started with me realizing that my teacher had made a mistake with my grades ( giving me a C- instead of a B-, which meant i didn't pass the class and wouldn't have been able to go to pharmacy school ). I emailed him immediatly ( about 6 in the morning ) and it wasn't until 8 in the evening...

Just thinkin' about all of the cars I'd like to own, and what I'd like to do to them and I started thinking about how it would be cool ( at least to me ) to make a dart version of the el camino ( thinkin 67-69 tail end with 70-71 front end ) In my head, it looks pretty cool...