Search results for query: *

Rebuilding the stock 318 in a D100 and using a bunch of leftover parts from my dart that got upgraded along the way. Wanted to get couple of opinions though on just what to do with it. The truck will be on the street 99% of the rest of its life. We are buttoning up the lowering job, new brakes...

Not if you like them, just trying to figure out if any are still available for a 73. The few Companies I’ve found stop at 72 of course. Any help? Thanks!

Questions for you... How much do the bucket seats and tracks interchange between years? Specifically, will bucket seats from a 74/76 Dart need different tracks to go into a 73 Dart? Maybe 73 tracks specifically or will the other years tracks still bolt right in? Also, are there just the seat...

Has anyone found a company or option for a dome light lens that isnt the factory ivory white/slightly yellow? Ive found new but they are just as yellow as mine. I know, just get one from a newer rig, I've hit the junk yard and nothing popped out ay me that would work well with the new headliner...

Long story short I put an engine together about ten years ago and havent fired it yet. Getting close now and for some reason went back and calculated what my compression ratio is going to be at... then I got scared. So before I say what my calculations keep coming out to, can someone run the...

Im pretty decent at google but cant find new door handle cups for the life of me. Anyone?

Having trouble tracking down the rubber rests that sit in the door that the window glass rests on when it is rolled down. Anyone know the actual name of these things or even have a link? Ive scrolled through every site and cant find the part. thanks!

Pic from June, 2000. This car has been in ten different iterations, five of those while I owned it and at least 4 of those, while it was in the middle of the build. I grew up in this car in a manner of speaking. My best friends mom owned it, then sold it to him to drive for high school. As...

So whatever these things are called: Im having a heck of a time finding them for my 73 swinger. seems as though anyone that sells them thinks they are only compatible for years from 67-72. Example: http://www.autobodyspecialt.com/cgi-bin/commerce.cgi?preadd=action&key=MP-7009 So does anyone...

Any recommendations on where to pick up a vinyl top for a 73 Swinger. Im getting weird answers and results; everyone I try seems to think they are all the same but the 73 has the pillars covered. Ideas?

Ok have the fuel cell in, fuel lines run, now what do I do about a fuel guage? I would perfer to us the factory guage, so what has worked for anyone else doing this? Thanks! -Sefus

Looking for a front passenger side fender for a 71 swinger in good condition. Email [email protected] if you have one. Thanks!

a while back I saw a thread on muffler flow rates and decible levels and think i found the same one when I was searching but what I couldnt find was the difference in the welded and X offerings from Dynomax. My set up is a headders off a 360, planning to run an X pipe (you want it as close...

So I've been looking everywhere and tried a few times at doing my own but just cannot come up with a workable outline of a dart (in my case a 73 swnger) to apply different paint schemes to. I figure there has got to be software or some sort of program to put different cars outlines/renderings...

I've been thinking of what it will take to make our Abodies transfer weight and learning about setting up a suspension and want to see what some of you can tell me on the old (or new) standard tricks and mods. I dont have 4 corner scales now but could have some avalible if I need em. Obviously I...

So after the mini tub for clearance I had to cut out the torsion bar supports that hold the trunk lid up and am thinking that some struts like on a mustang foxbody hatch or any other strut that will assist when opening and hold up the lid would be pretty sweet. Anybody do anything like this...

In my constant search for efficiency, I'm thinking about how to keep constant cold/clean air coming into the carb. An open air filter under hood is good till the engine heats up, then you are getting a heat sinked incoming charge temp. A hood scoop helps feed cold(er) air into the open filter...

I'm jumping into the mini tub on my 73 Swinger and have a few questions for the dudes that have done it. I got a great deal on a whole 8 3/4 rear end from a friends 74 Duster that was narrowed 7 inches and he ran a 15 x 12 inch wheel with a 5 inch back spacing so thats the size rim I will be...

Just want to tripple check that the fender and door from a 74 swinger will go right on to a 73 swinger. Thanks!

Anyone know a good forum for Dakotas? I looked around but think I've been so spoiled by this site, all the others seem sub-par, lol. Thanks! -Sefus

Alright Im confused. :scratch: I swaped my 318 to a 360, used all the same hardware - I thought. But neither dipsticks are the right combination with the dipstick guide tube to get me an accurate oil check. One is a good 2.5" too long, the other is too short to get any reading. Can someone...

Can anyone recommend a good sound deadener? I searched the forums but didnt come up with any results. Thanks!

So I'm looking at the rear of my 73 swinger and saying to myself: 'self, where the googly are you going to mount the battery cut off switch?' All I see is drilling through the trunk AND bumper and mounting on the bumper. I'm not really into that but there sure as heck isnt a spot that is...

Buyer beware I know, but a member on here has really screwed me. I bought some items (Radiatorw/fan, guages, and wheels) listed in this thread: http://www.forabodiesonly.com/mopar/showthread.php?t=9650&highlight=aluminum+radiator+weld after many emails and thought everything was good. Up until...

So my front bench was trashed, got some charger seats (see thread in "Items for Sale") that will be way big, A body buckets are rare, and the Summit cheapys are, well cheap. So before I break down and make the Summit order, has anyone found any good looking and fitting alternatives? Thanks!

So me, the machine shop, and me again all missed this tiny little detail till my buddy saw it, half the dipstick tube (the bottom half) is broken off and stuck down in its hole. The engine is in so there is no easy pulling the pan type answer so I'm looking for some options on how to go about...

well after taking the steering box out and tilting the motor I got the headman headers on. Few days later I go to put the starter in and Son of a... Its too big and I'm not going through all that crap to take the header off again!!! So the question is, do the mini starters have a smaller...

Droped my engine back in and am looking through my pile of parts and cannot for the life of me remember how the power steering brackets go or even which ones are the right ones. Can anybody snap a quick pic and either post it or email it to me at [email protected]? Just a quick pic that...

Ok it runs down to be a 73 dart, 360, air gap intake, 780 demon (borrowing till I find a good 650 holley), stock hood for now and am worried about clearance under hood for the air cleaner. anyone run into any problems? thinking a drop base with a 4inch filter should do it but any input would be...

Was going to step up to 3/8 inch fuel line then as I'm thinking about it, that line wont do a thing if the outlet/pickup/sending unit/whatchyamacallit from the tank is still a 5/16's. Any thoughts? I havent looked at the tank yet so Im just assuming from here. Thanks!