Search results for query: *

  1. ice1 dart

    still getting hot 500

    The hood is actually functioning but it is not sealed. If you looked at my pictures, i replaced the electric wp with a mechanical one. Just fighting for space. thinking of going mechanical clutch fan with a shroud. hopefully that will do it.
  2. ice1 dart

    still getting hot 500

    so i guess playing with the timing is not the problem and i should concentrate more on the cooling and air flow.
  3. ice1 dart

    still getting hot 500

    Got a 75 dart swinger with a big block 440 stroked out to a 500. i have a mild roller rocker comp cam with a 113 lsa split. the cam duration @ .050 is 230/236 and lobe lift is at .389/391. mechanical timing is set at 0" and the heads are edelbrock 84 cc rpm heads. The total compression is 10.7...
  4. 1975 Dodge Dart Swinger 440

    1975 Dodge Dart Swinger 440

  5. ice1 dart

    gettting hot upon take off

    I'm stump guys... During stop and go traffic or from stop light to stop light my temp progessively gets hotter and hotter. Here's what im running.... 440 stroked to 500. edelbrock rpm 84cc heads. edelbrock pro flow fuel injection with 44lb injectors. timing 32 degrees and im running 50/50 91...
  6. ice1 dart

    overheating issues

    hey guys thanks for all the advise. i got everything to cool down. my mixture was a little too lean and the fan temp switch was a little off. my guage reads about 200 degrees and it is steady. just need to play with the timing and fuel mixtures and attempt to work out all the tuning issues.
  7. ice1 dart

    75 dodge dart swinger rear tail light assembly wanted

    I'm looking for a rear tail light assembly for my 1975 dart swinger. i need the lens and chrome trim. please leave a message or info where i may find used or repops for my car. any info would be very helpfull. thanks guys
  8. ice1 dart

    overheating issues

    thanks guys. appreciate the suggestions. im just a novice. herre's aanother question anybody running an edelbrock pro flow multiport fuel injection? any suggestions for the edelbrock pro flow set up?. running a 230 @ .050 int 236 @. 050 ex lobe seperation 113 gross valve lift int .583...
  9. ice1 dart

    overheating issues

    using a high flow t-stat already . gonna try that 160 deg t stat and see what happens. sorry hhr fans ?
  10. ice1 dart

    overheating issues

    :munky2:Running into trouble here and scratching my head. this is what i got. 75 dart swinger with a 440 stroked to 500. 84 cc edebrock rpm head. edelbrock pro flow multi port fuel injection. keisler 4 speed auto trans. aluminum radiator with electric fans. meizere electric water pump. t stat...
Back
Top