Search results for query: *

  1. A

    [SOLD] Aluminum Billet throttle body.100$

  3. A

    [FOR SALE] For Sale: 67 Big Block cast iron intake

    Casting 2806301 factory cast iron 383 intake from a 67 Dart GTS or Barracuda Formula S location Rio Rancho, NM 87124 prefer local pickup $120 or make offer
  4. A

    [FOR SALE] For Sale: Cast iron Big Block bellhousing 2468372

    Bellhousing cast iron 2468372 with dust cover, fork, block mount, and pivot from a big block formula S barracuda has some welded repaired damage-see images located in Rio Rancho, NM 87124 prefer local pickup (heavy!) $400 or make me an offer?
  5. A

    [FOR SALE] For Sale: Slant 6 OD bellhousing & Dust cover& fork

    bellhousing 3743643-1 slant 6 with dust cover and fork & pivot for a A833 Overdrive transmission 5.125 opening - have two are available (however-only have ONE dust cover) Located in Rio Rancho, NM 87124 would prefer local pickup or near(?) (will ship on your cost) $200 or make offer
  6. A

    [FOR SALE] Used Connecting Rods-Qty = 8 see Arias 425 HH pistons post

    adding images-sorry for the delay
  8. A

    [FOR SALE] Used Connecting Rods-Qty = 8 see Arias 425 HH pistons post

    Used Connecting Rods for a 426 (were attached to Arias 425 HH Pistons- see other post Asking $400 or best offer (will make a package deal with the 6 Arias pistons) Location: Rio Rancho, NM 87124
  9. A

    [FOR SALE] Arias 425 HH Pistons - Used, Qty=6

    Location: Rio Rancho, NM 87124 price: $300 Or offer?
  10. A

    [FOR SALE] Arias 425 HH Pistons - Used, Qty=6

  11. A

    [SOLD] Max Jax two post car lift

    Hello, I am interested in the max Jan lift. I am in Rio Rancho. Thanks, JJ
  12. A

    [SOLD] Intake Manifolds Mopar M1 Small Block

    UPDATE on the Inake Manifolds Mopar Small Block: The Three Magnum Intake manifolds were sold locally. Currently have the Red LA single plane intake in negotiations with: First in line- Dartwizer, @nd in line '68Cuda416. Posted new images-Let me know if more is needed. Thanks for you patience.
  14. A

    [SOLD] Intake Manifolds Mopar M1 Small Block

    The M1 Magnum Single plane intake is also for sale locally. It may be sold, I will find out for sure on evening of Friday, June 10th. I will let you if it is still available.
  15. A

    [SOLD] Intake Manifolds Mopar M1 Small Block

  16. A

    [SOLD] Intake Manifolds Mopar M1 Small Block

    Small Block Mopar intake manifolds LA and Magnum- most never used just installed Location: Rio Rancho New Mexico Price is $350 OBO plus shipping or prefer pick up locally
  17. A

    [FOR SALE] 1969 Barracuda Scoops

    Scoops for a 1969 barracuda with Cuda package Location: Rio Rancho, NM PN 2949336 & 2949337 These are NOS (worked @ dealer in Albuquerque) one has two of the pins broken-see image Sorry, I have bought but this site, this is my first attempt to sell here Price: $500 each or offer? Payment...
  18. A

    Is there an easy way to degrease and de rust a K frame?

    In the past I have taken my K-member to a machine shop that has a hot tank. Then use a MAP gas torch to ensure most/all of the grease has been removed. Hope this helps. JJ
  20. A

    Front band damage

    Hello FABO, Did a search for PK4505162 and this was the only finding. Can anyone tell me what this trans would have come out of? Anything special about it? I just picked this up on craiglist in NM and was unable to find that number listed? It appears to be a lock up front shaft. Any info...
  21. A

    [FOR FREE] Free 1995 jeep grand cherokee wiring harness

    If dana67dart does not want it I would love to have the harness with the ecm. I would pay using PayPal or another method if you prefer. Let me know. Thanks in advance, Jim. Aka attenuated
  22. A

    Is this a crack

    One of the mopar mags had some information on the Lakewood bell housings sold through Holley. Go to the Holley wesite and search for Lakewood bell housing for the current information .
  23. A

    Is this a crack

    Lakewood is making bell housings "new" for gen 3 Hemis as well as small blocks that accommodate a883, tremec trans. Sold through Holley. Good luck, hope this helps.
  24. A

    [SOLD] '67 & '69 Barracuda Tail Lamps

    Ok, I have been on the site but still struggle to complete transactions. Can toolman mike help BOTH of us?
  26. A

    [SOLD] '67 & '69 Barracuda Tail Lamps

    Hello Martin, I am not sure how to send you a private message so I can send payment? When I tried the For a bodies site said: "Martin Gendron's inbox is full. Therefore, you cannot start this conversation." What is the best way to handle this?
  27. A

    [SOLD] '67 & '69 Barracuda Tail Lamps

    Hello Martin, Your mailbox is full, so am sending this email. Hope this works. I would like to take advantage of your offer of the all three (two right side, one left side) 1969 taillight assemblies, see your email below: I am writing with numbers for you. So, this is what we have: 1-1969...
  28. A

    [SOLD] '67 & '69 Barracuda Tail Lamps

    I win am interested in numbers 1 & 2 if shipping to USA area code 87124 is possible? 87124 is rio Rancho, New Mexico . Let me know if that is possible. Thanks, James. Aka attenuated.
  29. A

    [FOR SALE] clutch bushings

    I would like 10 of the clutch bushing you have listed. I can paypal for the purchase. let me know total with shipping to zip 87124. thanks in advance for the help. Jim (aka attenuated).
  30. A

    [FOR SALE] clutch bushings

    I posted but did not see it replied?
  32. A

    [SOLD] Dixco Mopar Hustle Stuff hood mounted tach

    Have you tested it functionally? What are the four electrical connections?
  33. A

    [FOR SALE] small block EFI intake manifolds

    Can you show the ports where it meets to the cylinder heads?
  34. A

    [FOR SALE] A833_OD trans (Truck/B-Body)

    A833- Overdrive Transmission only from 1986 Dodge truck good condition with levers prefer local pickup in Rio Rancho New Mexico Asking $350
  35. A

    Which A833OD is This?

    Apologies, I will post that later in the proper for sale section
  36. A

    727 Rebuild recommendations

    At first glance it looks like a 904, not a 727? Like 413 suggested, drop the pan and see what it looks like inside then determine if it needs gaskets & seals or a full rebuild.
Back
Top