Search results for query: *

Hi , ive fitted a 5.7 and rfe545 from an 07 ram into a 1948 chrysler .Its completely stock and is running a hotwire harness and 05 ram ecu. Ive been driving it since easter with varying issues. The original ecu from hotwire runs perfectly but must have a dry joint or something as when it gets...

Hi , im hoping theres someone on here that can help with some problems im having with my 07 5.7 ram engine and rfe545 .Hotwire harness When I installed the engine , i had an un known computer that cycled the start system and cranked but had no signal to the coil packs. Turned out the security...

Hi , this an 07 ram 5.7 hotwire harness and computer. The first unknown computer i had wouldnt fire the injectors so i ordered a 2nd hand one from hotwire re flashed to suit their loom. The engine cranked , fired and ran for say 5 seconds and i turned it off to check for leaks. Attempted to re...

Hi , im running an 07 truck 5.7 in a hotrod with a ford power steer rack. the ram pump runs at 1700 psi and the rack needs 1000 psi. Ive disassembled the pump and found nothing is adjustable . Surely there must be a way to reduce the working pressure and or flow? These type 2 pumps are similar...

Hi , im on a family holiday to the states from Australia this month (november 2013) and ive got one day on my own in LA and one day in vegas to myself to do some car stuff . What is there that a mopar fan shouldnt miss while in these areas ? Any tips and help appreciated Thanks Ben

Hi , probably being hopeful but worth a try. If anyone has a bolt on overdrive to suit a 727 auto that they are willing to sell , send me a PM. Im in Australia but im happy to pay the postage . Fingers crossed , thanks Ben

Hi , after pulling my 360 i found the bores oval and alreadty 40 thou over .I had tossed up the idea of building an engine myself but with a decent mopar friendly machine shop a long way away I decided to let an engine builder build the lot. Im In Australia and have ordered most parts either...

Hi , im hoping someone can steer me in the right direction. Im looking for a set of 340/360 shorty headers .Icurrently have a 273-360 multi fit set but the flanges are cut to suit a 273/318 exhaust port size so about 10-15% of the 360 port is covered by the header flange. I spoke to hedman...

Hi , I have an australian valiant , same as a 68/9 dart. I need the curved section of moulding thats about 2 inches long in roughly the shape of a letter C. It goes on the end of the stainless moulding that runs along the top of the door and then curves up the C pillar. Does anyone know if there...