Search results for query: *

Car was being built to use for drags. Has a bolt in roll bar. Ladder/leaf rear with springs moved in. 8 3/4, 4.10 gear, spool, 31 spline Moser axles with Green bearings. Completely stock front suspension with discs and sway bar. Has power steering gear and column. Only interior is bare dash...

As title states. The bag is still factory sealed. So, parts look to be all there. Hard to call it NOS, the box is pretty ratty. But, it is a sealed and, obviously, unused. Part number is still somewhat legible. Will ship anywhere, PM first for costs and logistics. $85.00 OBRO shipped to your...

Low mile take out FACTORY 6.1 Hemi camshaft. Overall condition is excellent. Great affordable cam for the early 5.7 Hemi engines. 379AD is the last part of the part number. Do your research on specs. I've used these cams in early 5.7 with great results. $200.00 shipped to the lower 48. Will ship...

These parts are basically new take off parts. Heat shields are present. What you see in the box with intake is what you get. Would be costly to ship all in one box. Would probably have to do two packages. Since I have to put a price on this, I'm gonna ask $250.00 for the whole works. If you need...

Fits small block. Not for A833 transmission. Not heavy, just bulky. Shipping maybe not so bad on this one. What you see is what is available. No other parts to it. Asking $75.00 plus the ride. Located NW Iowa, 51246. PM me here. Thanks, FABO!!

Small Block truck bell housing. Not for A833 transmission. Includes inspection cover and dust shield. Heavy, so shipping will cost. Located in NW Iowa, 51246. Asking $75.00 plus the ride to try and keep costs low. PM me here. Thanks, FABO!!

As title states. Spectra site lists this for 91 through at least 96 Ford F-150 trucks. Any and all questions can be answered by Googling the part number. It is in New condition. No rust inside. Lists on Cramazon for $109. Would be a little bulky to ship. Not heavy though. Located in NW Iowa...

As title states. These are forged flat top, two equal valve reliefs. These are .030 over size and include loxks, pins, and rings. See pics for specs. Bought before block was done, it needed to go .040. No need for these. Summit advertises $611.20. Not currently in stock. Buy these for $500.00...

Looks to be complete with all linkages accounted for. Throttle lever is obviously not correct. Throttle shafts move freely, as does choke and air door. Idle air mixture screws look to be out if a production TQ, they are NOT the original. This would be an easy one. Against my better judgement to...

Legit 1000 cfm Thermoquad. It is ROUGH!! Both throttle shafts are stuck. The choke actuator shaft is stuck. Air door moves and choke plate shaft will move. Removed choke plate for pics of the primary boosters to verify cfm. Against my better judgement to sell, but...... Don't know when I'll get...

As title states. Has a fresh accelerator pump diaphragm, stock jetting(72), and stock power valve(6.5). Works great! Used to use it for test carb. Haven't used it much the last couple years. I had the bowls off and all is good and clean. Shafts are right and tight. Bolt on and go. $200.00 plus...

Carter AFB 4310S. Came of off a running/restored 70 GTX. Not the correct carb for it. Replaced it with correct carb. This carb works very well and was obviously gone through. Has the small diameter air cleaner base. Bolt on and go. $150.00 plus the ride. Located in NW Iowa. PM me here. Thanks...

As title states. It has been converted to manual choke. All parts move freely. Definitely needs cleaning and kit. $50.00 plus the ride. PayPal accepted, buyer pays fees. Located in NW Iowa. PM me here. Thanks, FABO!!!!!

Does anyone know if a roller-ized governor support exists for the 904? maybe it isn't necessary for the mild performance stuff. Was just curious. At the parts house checking on Timken parts, they don't show a bearing that has the same shaft diameter as the 904. 904 shaft dia. at the support is...

Carb is for pic. The total asking price on all the TQs I have listed is $450.00 plus shipping. If someone wants the whole lot, I would take $275.00 plus the ride. I have a small wood crate I can pack them in. Shipping on all is going to be spendy. Located in NW Iowa. PM me here. Thanks, FABO!!

Single, NOT A PAIR, big block '346 casting. Magged and checked good. Ready for your resto, door stop, or paper weight services. $50.00 OBRO plus shipping. Sorry, no PayPal. Postal Money Orders or check accepted after it clears. Located in NW Iowa. PM me here. Thanks, FABO!!

As title states. 1973 340 engine, California, Manual transmission. Moves stiff. Missing linkage. $100.00 OBRO plus the ride. Sorry, no PayPal. Postal Money Orders or check accepted after it clears. Have other TQs listed. Can make package deals. Located in NW Iowa. PM me here. Thanks, FABO!!

Another 9097S. Also moves and complete. 76 400 engine. $75.00 OBRO plus the ride. Could make you a heck of a package on these twin 9097's for your tunnel ram project?!! Sorry, no PayPal. Postal Money Orders or check accepted after it clears. Located in NW Iowa. PM me here. Thanks, FABO!!

As title states. 76 400 engine. Moves and is complete. $75.00 OBRO plus the ride. Sorry, no PayPal. Postal Money Orders or check accepted after it clears. I have other TQs listed. Can make package deals. Located in NW Iowa. PM me here. Thanks, FABO!!

As title states. From 1980 360 truck. Complete and moves. $75.00 OBRO plus the ride. Sorry, no PayPal. Postal Money Orders or check accepted after it clears. Have other TQs listed and can make package deals. Located in NW Iowa. PM me here. Thanks, FABO!!

As title states. From 1973 440. Stuck and missing linkages. Will need all the work. $75.00 OBRO plus the ride. Sorry, no PayPal. Postal Money Orders or check accepted after it clears. Located in NW Iowa. Have other TQs listed. Can make package deals. PM me here. Thanks, FABO!!

As title states. From a 77 440 Lean Burn. Complete and moves freely. $50.00 plus the ride. Sorry, no PayPal accepted anymore. Postal Money Orders or check after it clears. Sorry for the inconvenience. Located in NW Iowa. Will have more TQs to be listed and can make package deals. PM me here...

As title states. From 1973 400 engine. It is stuck. Linkage missing. Will need all the work. $75.00 OBRO plus the ride. Do to the ever changing BS at PayPal, I can no longer accept that as payment. Postal Money Orders and checks accepted after it clears. Sorry for that inconvenience. Located in...

As title states, all three are left/driver's side manifolds. One 68-70 and two 72-74. Cast number on the early one is hard to make out. Use your own discretion. One if the newer has heat shield intact. All were shot blasted clean and primed. Posting for a friend. These will be on site at the...

Looking for a first edition. I bought a ninth edition off Ebag awhile back. I think they cut a LOT of different information out. There is a first edition on said Ebag now, I am NOT going to spend $95 on it. If someone has one I'd be willing to pay a FAIR price. Condition is not important as long...

Has anyone had a cam reground for a Magnum lately? Was wondering cost. From reading through different threads Oregon Cams comes up quite a bit. Going to try to call tomorrow. Was just curious if anyone has done it lately. Will be going in a 5.9 with a "fresh" bottom end with the New Zealand 318A...

As you can see, brand new 9 inch clutch kit for slant six and 273 engines. Ordered by mistake. All parts are pictured. New plate, disc, bearing, and multiple bushings. Also has alignment tool. My loss, your gain. $150.00 to your door in the lower 48. Will work with our friends across the border...

It's dirty. It's grimey. It's grungy. Not cracked anywhere that I can detect. T-stat and carb mounting holes need help. They're pictured. Fits 64 & 65 273 engines. $170.00 plus shipping. OBRO. Located in NW Iowa. PM me here. Thanks, FABO!!

650 spreadbore. Dirty and needs a kit. Shafts move freely. Choke is mechanical, not electric. I have not run this carb. Acquired and put on shelf. Asking $85.00 to your door. Located in NW Iowa. PM me here. Thanks, FABO!!!!