Search results for query: *

1971 Dodge Dart Swinger Special $6650.00 55 detailed photos available at http://s86.photobucket.com/user/kenicb/library/Dodge%20Dart?sort=4&page=1 Exterior -new paint metallic brown w gold flake -new chrome bumpers -New 205 R60 14 inch tires on Crager small bolt wheels -newly rebuilt front...

Hey there, i would like to get the lot including the two reverse light lenses for 72 dart "72- dart swinger 2 reverse 1 tail lens lot $25 delivered lower 48" thanks so much God Bless Keni

hey there, would like the bumperettes both sets and the left side tail light lense w the clear back up panel. thanks so much. God bless keni

pic #2

well here ya go. I fabricated a SUPER SIX dual-snorkel intake that will line up with the hood scoop holes. Probably wont notice the difference a whole lot but it certainly looks functional!

nice! thanks for the feedback. Now i know it can be done and actually makes sense. I had the duct work on it before which sounded a little better. But you are right, it didn't make much of a difference in daily driving. I'll send up a pic when I get it all done. God Bless Keni

I installed the two factory hood scoops on a 71 dart. The slant six engine is upgraded to a two barrel intake with dutra dual exhaust. Im thinking of fabricating a dual snorkel air cleaner that will reach out to the two ram air intakes coming through the hood. Has anyone done this? Air...

the Holley 2280 or Carter bbd are very similar. I've run them both on super six set ups and honestly I've never been able to tell a difference. I do know its best to find one new if you can, as opposed to a remanufactured junk piece from Autozone. This Holly r8691 is available on ebay right...

first pic shows how a B&M 340 and 360 flex plate differ. second pic shows the 340 harmonic balancer for an externally balanced block. This balancer is different than the 360 balancer shown on the blue engine below this is a neutral or zero balanced torque converter. Basically its just a...

Double check that you have the correct flex plate and that your harmonic balancer is correct as well. For instance, The 340 and 360 have different balancers and one will not work with the other. The other balancing factor to consider is the torque converter. There are a couple ways you can go...

came off a 74 dart. this is driver quality but comes complete with the original push in connect on the pig tail. 10.00 plus shipping. please PM if interested. Thank you God Bless Keni

Map Light Sold. 74DartSwinger360 Man I'm so sorry. I had a pm that came in about an hour ahead of your posts. If it doesn't work out I'll be sure to let you know. God Bless Keni

came off a 318 in a 74 coronet. in good shape. 15.00 plus shipping. Please PM if interested. God Bless Keni

good w no scratches. Mopar logo. Came out of the driver's side of a 74 dart. 10.00 plus shipping. Please PM if interested. God Bless Keni

MAP LIGHT has sold. Thank you Evilred73 came out of a 74 dart. complete with wiring 10.00 plus shipping. please PM if interested. thank you God Bless Keni

came off a 74 dart drivers side. driver quality complete with wire and push-in connector 10.00 plus postage. thank you God Bless Keni

thank you Bob. I sent you a pm. CLIFFORD is SOLD

clifford aluminum 4 barrel intake 125.00 SOLD super six 2 barrel iron intake 75.00 super six choke 20.00 slant six early 60s valve cover. sandblasted and primed 35.00 Cost of Shipping will be added. Please PM if you are interested. God Bless keni

Hey Jerry, sorry for the delayed response. The rubber grommets are not necessary, but they help keep water out and direct the air downward into the bay. I noticed a slight difference in the tone of the carb when I went to an open air cleaner lid. This allowed the air from both holes to...

hey mr anderson, thanks for the response. Yes i am using the two piece Dutra Dual exhaust. My confusion with using a block off plate is what does it accomplish? Sounds like you are telling me it is optional. Without the block-off plate, what keeps the exhaust manifold from having a huge...

i need help getting my parts together. I have set of Dutra Duals and an Offy 4 barrel coming in the mail Will i need a block off plate for the hotbox on the exhaust manifold? Doesn't look like the two manifolds bolt together as do the super six manifolds If i do need a block off plate...

here's the final result with scoops in place and new paint! Metallic dark bronze. I found the rubber grommets that go into the holes by searching online. there were a couple folks who made them. Thanks for all the help. Great forum. God Bless Keni http://www.kenithomas.com

Promised i would share these pics of the install. I bought a template from FABO member TAZLDAZL. he sent detailed instructions and the template rolled out and fit the 71 dart hood perfectly as promised. i used a fine metal blade on a jigsaw to cut the circles. Then i polished the edges...

thank you for taking time to help me with a thorough explanation. Here's what I know IS the cluster actually getting GOOD 12V power? Yes All lights on the PC are working since I replaced all the bulbs. The cluster connector may be loose/ corroded I pulled it cleaned it and pushed it back...

71 dart temp gauge, fuel gauge, and Ammeter have stopped working. as per the 71 service manual, I tested the voltage limiter with a test lamp on the back prongs of the gauges. The test light pulsed as it should. So voltage limiter is working. The other option in the service manual is...

Hey there, Looking for a nice 1970 coronet in the 20K range. Prefer blue, green, black, burnt orange or even black. Not interested in the bright Fruity flavor colors like Plum Crazy, Mango or Banana. If you know of one, please send them my way Thanks so much. God Bless Keni

1) is the passenger side mirror sold? 2) Also i need a lock retainer. the little forked things that hold the door or trunk locks in place. 3) I need the clips that hold the rear window molding in place. thanks. God Bless Keni

looking for one door lock retainer. This is the two fingered fork shaped piece that slides behind the lock to hold it in place. Also need a a good glove box latch with the chrome knob. any chance you have them? God Bless Keni

I am looking for a glove box latch with the chrome handle. can be locking or not. also I am in need of a couple door lock retainers. these are the two- fingered fork-looking things that slide on behind a lock and keep it in place. thanks so much God Bless keni

this is the one with the clear middle for the reverse light to shine through. Driver quality is fine. thanks so much. PM or post in the thread. I'll get back to you. thanks God Bless keni looks like this one on ebay...