Search results for query: *

Clink on the link... >>>> http://youtu.be/944thNo3GAo Check it out. My wife made this rad video of our 1970 Dart... work in progress but its starting to get there!!! (nice little burn out at the end)

I suggest we include Camaro's on this site!!! Hahahaha Just kidding... this is my 70 Dart and my buddies 67 Camaro. This was at the Good Times Cruise In in Langley B.C. Sept 2013. Does anyone know of a helpful Camaro Forum? I feel bad I have access to such a rad forum as FABO for my ride...

Quick question(I asked this already in my Doug's Headers install thread... in Exhaust forum)Hoping for a quick response:scratch: I want to replace my 90' oil filter adapter with one that threads directly into the block... and I want to run a short oil filter. Does anyone know part numbers for...

Hey guys haven't posted in awhile now... I've had these new Doug's headers sitting in my garage for a little over a year now(bought them at KMS auto). Finally got the rebuilt 360 installed and broken in(1970 Dart)... so its time to install these bad boys!! So far Ive got the passenger side in...

This my car... I'm working on installing hood pins. Its great because my wife and I have lived in small apartments for 12yrs.. we just moved to a house, so working on my car in the drive way is a dream come true for me! (and its friday,, so that makes it even better)

Hey guys any thoughts on this one? I have a 70 Dart just installed a new alternator(my mechanic installed it... one wire style -100 amp) and a new battery... sometimes the Auto meter gauge reads 14 while running the car... other times it drops off to 12 and slow drains down to zero. By the time...

Just a quick qestion here... I found an 8 3/4 localy. The owner says its out of a 74 Cuda... not a Sure Grip. Can I use this in my 70 Dart? Can I up grade to a Sure Grip/Posi stlye? Many thanks:cheers:

Just curious.... I'm looking at a Ford 8.8 on Craigslist(cheap)... it has disk brakes + independent rear suspension... are all 8.8's limited slip rear-ends? How can I tell from looking at it laying on a shop floor? I'm thinking about doing this conversion on my car... an 8.75 is pretty tough...

Quick question... I put a set of Eddy Magnum style heads/intake on my 1970 360 block... I need to change my throttle cable linkage to make it work. Any suggestions? Part numbers or pics of what you've done??? many thanks.:prayer:

Hope this is the right area to post this... I am doing a 318-360 swap in my 70 Dart. Engine is back in the car and almost everything is hooked up except the alternator... the lower bracket won't line up. I am using Edelbrock Magnum style heads and I think this might be the problem. Any one else...

I've never run a transmission cooler before... but the Be Cool rad I bought isn't set-up to cool the transmission fluid. So I bought this one from B & M.(11 X 5.75 X 1.5) I have 360/904 combo going into the car. Is this the right size for me???? Many thanks.:newb:

I'm probably doing something wrong... just got the 360 into my Dart.(was originally a 318 ) Everything lines up... but the oil filter. I cant thread it on, its rubbing against the exhaust pipe on the passenger side. Was the 318 oil filter any different from the 360...

1970 Dodge Dart we removed the original 318 and are now installing the rebuilt 360. Apparently the motor mounts are a little different. The passenger side mount works fine... but the drivers side is definitely different. Any suggestions as to what to do? Many many thanks.:banghead: (the 1st...

OK I'm thinking about a new fuel pump for my new 360... any suggestions? I would like to go with a cool looking one(chrome, blue, black what ev's) Or is my stock 318 pump okay to keep?(its just soo ugly!!:puker::puker::puker::puker:) Many thanks.

Quick question.... how do I tighten my crank shaft bolt to the harmonic balancer? The engine just starts to turn over as I apply...

Ok who's the dip stick here? (is it me?) Is there a difference between a 318/340 dip sticks(length?) and one made for a 360? (i Know the pans are different)Also any suggestions for fastening this part in the block? The tube is loose. THX!!! :finga:

Ah yes after a long day... nice smooth Scotch(and a beer!):pl:

Whoooooo -hoooo!!!! Finally back now I can stop procrastinating and get the Dart back on the road! Ok so here's the story... I get a recommendation from my engine builder for a good tranny builder. I talk to this guy on the phone, he sounds good. His dad was a transmission builder, and together...

Is it weird that I am soooo excited about this cool little fuel filter that I bought yesterday? Waaay over priced but still pretty cool. It can be cleaned out and reused too.:finga::finga::finga::finga::finga::finga::finga::finga::finga:

Ok here's my new valve covers.:) I found it a little bit difficult to find valve covers for the magnum heads.... not a lot of selection available. These Eddy covers were a little less expensive than the Mopar valve covers. Also available in polished aluminum. (part #41773) Here's the valve...

Is this an 8 1/4 or 8 3/4? Can someone id what I have here? Many thx :finga:

Hey I bought this 1" space when I first bought the car, it was running rich and I thought this might help. I never did use it. Now I've got a rebuilt motor with an Air Gap manifold. Can I still use this spacer? Any advantages to using it? Any disadvantages? Thx:tongue1:

This is the fun stuff I love this part!!!! Started painting the 360 tonight, Hemi-Orange(not very original) But it goes well with the burnt-orange on the body of the car. Dupli-color one and a half cans(plus one and a half cans of beer:thumleft:).... multiple thin coats. Man I hope I'm back on...

Ok round 2! After screwing up the first time I am about to bolt on my new pan... again!!!! Using Fel-Pro rubberized gaskets, and a little "Right-Stuff" in the corners. Any other suggestions before I do it again? (Man that pans sooo pretty I almost want to bolt-it on top of the engine!!!) Many...

Just a quick pic for ya... finally got my new intake installed. Man I hope she's up and running this spring!:blob::blob::blob: Gettin antsy!

Trying to put my oil pan on the ol 360... i noticed the rear seal on the oil pan does not fit my after market Milodon pan... what to do? Any suggestions?:finga: Many thx!!!

Just wondering which way do i install the crank-shaft seal into my front cover???? Does the metal side of the seal face the cranck-shaft? thx! :)

Its finally here! I thought maybe the shop had lost my 360 but its finally done. Now for the finishing touches... coupla questions. Need to put the oil pan, front cover and intake manifold back on... which goes on first? Whats the best way to install the front cover seal.(the one that seals the...

Finaly got around to painting my engine bay. First off... I wanted to paint it to match the body color(that's what I did on my last Dart, looked awesome)But I had trouble finding the color match, I wanted to do it myself, and have many more pressing issues on the table(transmission build...

Just wondering where I can order a bolt-in sprag for my 904 up here in Vancouver Canada? Does the year of my tranny make any difference?(don't know the year of it.) Also looking for a deep trans pan. Any suggestions? thx:blob: