Search results for query: *

Hey, I was wondering if anyone knew the measurements of the bolts that are used for the bracket on the power steering pump. I've searched around and couldn't find anything. Thanks!

I'm looking for an air-gap intake to go on a 5.9 Magnum.

I was wondering if anyone ran this cam in their 318 or do I need to go with another cam choice... My Setup: '87 Roller 318, Edelbrock 750, Weiand Action+Plus Intake, 302 Casting Heads, HEI Distributor (Have A Unilite Also), Shorty Headers, A904 with High Stall & Low First Gear Set, 3.55 Gears...

Well, my governor decided to come apart and knock a hole in the extension housing. I have the TransGo TF-3 kit installed. Would it be okay to leave the valves out and replace the housing with no issues?

I'm looking to purchase a good converter while I'm in the process of this swap. Will a 2800-3000 or 3000-3200 be too much for a little daily driven 318 with a TF 727? I have a 750 Edelbrock, Weiand Action+Plus Intake, Exhaust, Mallory Ignition, Electric Pump/Fan, and 3.55 gears. I do plan on...

I was wondering if anyone knew what size bolts are required for the brackets that run from the engine to the transmission.

I just installed my A-500 and Reverse wants to play Hide and Seek. The forward gears are fine. I put it in Reverse and you can hear the transmission engage, but will barely move or catch and begin to move. Other times it acts like it's in Neutral. I want to inspect and clean the valvebody and...

I'm not sure if I'm posting this in the correct location or not. Please let me know. I'm in the process of assembling my 3.9 and noticed that the galley plug with the oil hole may be installed on the wrong side to oil the timing chain. There's a machined slot for the oil to run down on the...

I'm in the process of rebuilding my A500. I'm having issues with the kickdown band fitting properly around the drum. I normally get parts from WIT, but I ordered the band from O'Reilly's(Part # 767021). The band seems to be smaller. The adjusting screw will not sit in the grove of the band. Has...

I'm searching for a mild hydraulic roller camshaft for my little 318. I was looking for something similar to the Howards I posted below, but I will take what I can get. Thanks in advance! http://www.summitracing.com/parts/hrs-711915-12/overview/make/dodge Location: 31519

Hi, I'm in the need of a tail housing and searched eBay. I found a few late style housings. My question: Will the early and late style extension housing interchange with no issues? Thanks in advance! Joe

I'm looking for non-lockup 904 parts to convert my lockup transmission... If I'm mistaken, I'll only need an input shaft and valve body. Anybody else familiar with this conversion? Located in Douglas, GA 31533

I'm looking for an early style (non-lockup) 904 transmission. I'm located in Southeast Georgia (Douglas, GA 31533). I'm also searching for an 3,000 stall converter. All help is appreciated...

I had an issue with my 2-3 gear shift. It would do fine under normal driving conditions until operating temperature... Then, it would slip or seem like third gear is not fully engaged unless you get off the throttle, shift, back on the throttle (same result under full throttle). It also had an...

I recently installed my transmission and there is a lot of slippage in 1st and 2nd gear with no 3rd gear. It will go in reverse, but there is a lot slippage identical to 1st and 2nd gear. Could there be a blockage in the valve body that would cause these issues? I've adjusted the bands more than...

My washer/cup that goes on the end of the output shaft decided to grow legs and go on a permanent vacation. I've been searching high and low, but no luck :banghead: I guess I'll have to order them from WIT. On the website, they're showing three sizes (.052, .068, and .083). What is the correct...

I'm in the process of ordering the forward planetary gears for my lockup transmission. WIT has them in stock that uses the 5" OD Ring Gear. Would that be the correct part to order? Also found one on eBay with the same description... http://www.ebay.com/itm/like/291296046587?lpid=82 Part...

I currently have my transmission apart (broken converter hub) and was wondering if I needed to replace the band while I'm in there. I never had any issues out of it. I do have a manual valve body installed. I wanna make sure before I put it back together. What are some symptoms of a worn...

What's the proper forward clutch thickness for the A904/A999 transmission? I'm seeing 0.68" and 0.61" on two different sites.

It's about time for me to upgrade my stock transmission. My plans were to do upgrades to the motor first, but my transmission got jealous and started crying (ticking). I'm running a Lockup 904 w/ Factory High Stall and will be converting it to a Non-Lockup version. While the transmission is out...

I have a OEM Small Block Mopar Electronic Conversion Kit for sale. The kit has around 300 miles on it. I've upgraded my ignition system and no longer need it. Price: $85 shipped / Location: Broxton, GA (31519)

It's about time for me to make a few changes to my engine and I'm leaning towards the camshaft. I have the Diplomat engine equipped with the "302 casting" heads and hydraulic roller camshaft. Its daily driven and hurt feelings too :D My goal is to increase performance without throwing my...

I've done numerous searches, but nothing really gave me the information needed. I have my A904 transmission out fixing converter and pump issues. Sounds simple right? About a year ago, I decided that I needed a manual valve body in order to have the correct pressure since I couldn't hook up...

My front pump is trashed due to converter failure. I've searched local junkyards for one, but nothing came up. I searched online and found one at GatorTranz in Tampa, FL. They have the early style and double bushing style... Question: Being that my transmission is an 84 model, does the front...

I've been some research online trying to determine if I have the low-gear in my transmission. From what I read, all lockup versions came with the 2.74 low-gear and the non-lockup came with the standard 2.45/1.45 set until a certain year. 4295887 8450 3642 (I see a P and what seems to be a...

I've tried to search for a few threads that are based on 318 setups. I'm trying to see what most people run in the 1/8 mile with them and see what their setup is. I have a 318 that came out of a Diplomat. So far, it's stock except for the exhaust, intake, and carburetor. I'm wondering if mid to...

These push rods are new and are made for non-roller small block engines. They are stock length, nothing special. I'm asking $40 shipped. Location: 31519

TF 727 valve body: Has around 550 miles on it and 4 track passes (1/8 mile) since the B & M Shift Improver Kit was installed. Valve body will work in a A-904 also. Just install and enjoy (Add new filter). Asking $60 shipped... A-904 lock-up valve body: Is ready for your TransGo TF-3 kit. All...

I need to order a kickdown kit for my 904 (318 with Edelbrock). I came across a PDF file showing how the Lokar kit needs to be installed. It seems like the bracket & lever kit for my shifter will be in the way. Has anyone installed the Lokar kit with a shifter cable...

I've been browsing around for a rebuild kit for my transmission and I'm curious about the clutch colors. The transmission will see the track on occasions, but mostly driven on the street daily. The transmission has a B&M Shift Kit installed already. What would be a good kit (that won't put a...