Search results for query: *

Hey guys and gals, I need some help with my 1996 Ram 1500. I am doing the conversion to 3 inch wide springs, off of a 2500. The last item that I need is the shackle bushings. I can not find them for 3 inch wide springs. I am praying someone that has a 2500/3500 tow rig has done this before...

Hey guys, nice to be back as a couple of you havent seen me around in a long time. I have a question about a transmission I came across at my parents house. My mother explained to me that it was a 4 speed that originaly came out of my fathers D-200 p/u. The only numbers I found on it was...

October 19th-21st 2007 at Rockinham Dragway. I will be there the 20th and 21st, hope some of you other guys will be there, should be a GREAT time. They are having the night time qualifying on Friday and Saturday then Finals on Sunday of course. I will probably be staying at Best Western Friday...

Hey guys and gals! I have been getting asked by the few I got emails from why I havent been on. I miss everyone and everything here and when I could get on guess what, Joey broke the site haha. Just kidding Joey, glad you fixed it. Here is an update on "The Kids Life". School at NTI is...

hey guys and gals, sorry I havent been on keeping in contact with everyone but going to school and work really has me jumping all around. But I was wondering does anyone know of a place I could go for some '63 Belvedere body parts?

This might as well be a sticky with all the posts I could have on this thread. Anyone been having bad luck problems? I dont want to feel left out you know. I mean fuel pump went out in the truck Friday. Saturday I went to an auction and scored big on some things but lost the ceral box (still...

This past Saturday I got in contact with my rep. from NTI, Nascar Tech, with some very good news. Back in March every student that is going to NTI or any other UTI school had to take the same exact test on the same day and the same time. The test showed how much you already knew. It ranged from...

First of all I am going to do a tune up on the 97 Dodge 2500 I have. 5.9 liter( gas), 5 speed with 4 wheel drive. I need to know whats the best brands and such in everyones opinion of the following Spark Plugs Spark Plug Wires Motor Oil (brand?) Distributor Cap/Rotor Antifreeze Air...

Cutting to the point, have anybody ever got out of this kind of situtation. Cop pulls you over and says you were doing 90 in a 55. You say no I had no idea I was going that fast then ask the cop if he saved it on the radar, he replies saying no. My question is if the cop doesnt have any proof...

Hey guys and gals, I got to go to the Mason Dixon Mopar Show this past sunday and just wanted to share some pics of the action. The first 4 is of one of are very own, 416Scamp. More on the way!

Finally! I got my baby home yesterday and started to clean her out and figure out what all I am going to do. Its a 97 Dodge 2500, 5.9 motor, 5 speed w/ granny gear, 4 wheel drive, bed liner, headers, and 140,000 miles on it. Orignially came from Washington state and its unbelieveable that there...

Afternoon gentlemen! I was wondering if any of you older guys possibly in management, employing, or such, look up the Work Keys testing by us young students. If you dont know what they are it is a computered testing thing where us teenagers in the vocational fields take for reading and math. i...

Well guys I am proud to say I have finally got an intake manifold that I bought from one of our own, an Edelbrock Torker 340. Just got it today and opened her up after I got home. It is raining when I did this by the way haha. Well I tore off the old 2bbl intake, checked out the cam pushrods...

I am taking over Mr. Funny's job, aka memike. Haha One day a man goes decides to take a birth control survey throughout his neighboorhood. He knocks on the first house and this young lady comes to do the door. He askes her, "Excuse me I am conducting a survery on birth control, would you...

What is your alls opinions on the new 426 Stroker kit for the 360 block? Think it would be to much clearancing involved and weakin the block? They say the rotating assembly is lightened up so it will rev fast but have loads of torque. Whats everyones opinions?

Got a few questions for those veterans that have done these things. Will a 273 crank (forged) fit in a 318 no problem? Connecting rods on a 73 318, are they full floating type? Read that some are and some arent, anyway to tell besides tearing down the engine? Magnum heads, are they...

I have no clue where I thought of this but does someone make a coilover conversion from the torsion bar type suspension? Dont know if I heard this somewhere or dreamed it up. Thanks guys! A link would do or telling me to wake the hell up would too.

Now I know this is going to sound totally werid since most of you know me as the kid, but I got a job at a welding/machine shop. Here is my idea and I would like your alls opinions and such, good or bad. My frame is well, non-existing due to it having so much cancer and rust. So, since I...

Anyone know of what you can do to these or anyone I can call or email for info? Got a 727 trans that is originally out of a 63 Chrysler 300 but I would like to build the trans for drag racing, is it possible? Thanks guys!

This should be a poll but I am going to put it on here since I have heard many different answers.What would you call streetable compression? Wont mention names but I heard of a guy using 110 racing fuel and mixing it with 92 octane just to get it to run right and it was only 9.5 compression...

Hey just wanted to say that I will be on through out the morning and most of the afternoon today in the chat room. Come and visit.

Does anyone have a picture of how lowering blocks are installed? I probably shoudl have put this in the suspension thread but this applys to more than A-bodys and actually general Mopar (trucks). Thanks!

Just wanted to know has anyone ever tried a Panhard bar or a Watts link on their leaf spring A-body here for some better handling? Pics if you got one of them would be really nice!

Seen some people ask for the weights of engines so here it is. Slant 6 = 525 lbs 273-340 = 525 lbs 360 = 550 lbs 361-400 = 620 lbs 413-440 = 670 lbs 426 Hemi = 675 lbs Just the basic engine weights that some of us might be building or transplanting into our cars. Note that all of...

Hey I was wondering what is the most stickey street tire you can get on a 15x6 and 15x8 or 10 wheel? I want something that will handle through the turns yet be pretty good at taking off. Also... is 295 or 275 the max fit under a 73 Dart? Thanks!

Hey as many of you may know I am building a 383 and I am not very knowing of the performance parts for a big block. I was looking around for cylinder heads and really... besides expensive there are alot of them. But to save money anyone know of a good place that can port my 383 heads (out of a...

Alright I was looking around my 70 Chrysler that I finally got home a few days ago and had time to look at it and pick through a lil bit. In the glove box... get this... has the very first oil change and up to 1978 oil changes in the glove box on stickers. It also has in the glove box... when...

Hey guys and gals I am back and hoping all over here again so here the problem is. I recently got a 727 trans from a huge deal I made. Its a big block trans that came witht he 383 I bought from a 63 Chrysler 300. My question is how would I change things or get things that would make the 727...

Hey guys and girls, been a while. Some of you know I am a real small block lover but I found alot of parts and a 383 block for a cheap price. My questions are as follows: How much horsepower can a 383 block hold? What would need to be done (machine work) to get the most power? What kind...

Hey guys and gals. Its been a while since my last post cause now i am working two jobs 7 days a week... plus going to high school so yeah not much free time. But... one the way home one night I spotted a Mopar for sale. Yes a Mopar.... but no... not an A-body. Try a 1970 Chrysler 300...