Search results for query: *

I am looking for the bezel on a 64 Valiant signet 200 that goes where the shift bezel goes, except I need a blank one for a 4 speed car. Let me know what you have. Thanks guys.

I am selling a RARE 1966 Dodge Dart Station Wagon. Although these can be found from time to time, this one in particular is RARE AS HELL!!!! This is one of the most highly optioned wagons known to exist. I have the build sheet and window sticker to prove it. All original!!! Options include...

http://orangecounty.craigslist.org/cto/5158367525.html I really hate when people sell a car that they don't really know $&%* about. 1967 Formula S 383 car, was a rare car til they *##@#$ it up.. -#'s matching? Believe it when I see it. Do you know how many 67-69 383 blocks did not get...

Well, It seems that it is time to sell the car.... I am selling my 68' fastback Barracuda. The list is so long as to what I have done to it over the years.... Details: Exterior/Body Car was stripped to bare metal, front/rear glass popped, all trim removed and repainted in original...

I am selling a Comp Cams kit # K20-231-4 and a matching PTC 9.5" converter for 727. It's for a small block. Its a great street cam. It comes with cam, lifters, double roller timing chain, valve springs, locks, retainers, and seals. Specs are: Duration @ .050- 244/252 Lift -.520/.540 (with...

I am selling 2 upper trunk trim pieces from a 68 barracuda, and 1 middle piece from a 67 barracuda. The 2 68' trim pieces are in pretty good shape with only very minor dings(tiny). Each piece comes with 5 of the 7 mounting clips. They each have their respective end clips. 1 or 2 studs are...

I am selling a Comp Cams kit # K20-231-4 and a matching PTC 9.5" converter for 727. Its a great street cam. It comes with cam, lifters, double roller timing chain, valve springs, locks, retainers, and seals. Specs are: Duration @ .050- 244/252 Lift -.520/.540 (with stock 1.5 ratio) Powerband...

I am selling a NIB Comp Cams complete cam kit. Part # K20-231-4 It is a solid flat tappet style. Never opened, stored in clean dry garage. Here is a link to the specs. http://www.summitracing.com/parts/cca-k20-231-4/overview/ $495.00 new, I am asking for $400.00 Item is...

New in package FBO HRR688 box, coil, ballast jumper, and new ECU wiring harness. $150 shipped. My loss your gain.. Located in Concord Ca. 94520. Paypal accepted.

I have a BRAND NEW NEVER INSTALLED PTC torque converter for a 727. It is a 2600-2800 stall, 9.5" diameter. THis can be one of the biggest improvements you can do for your car!! :burnout::burnout::burnout: It is a neutral balance converter, so if you have an external balance engine, you...

I am selling a bumper off my 68 Cuda. It has one ding in it, but the chrome is in nice driver quality shape. Here is the ad on CL... I don't have the pics on this computer, sorry. Asking $70.00 http://sfbay.craigslist.org/eby/pts/4789796750.html Located in Concord, Ca. 94520

I am selling off all the extra parts I have left over from my restoration. All parts were removed from a 68' Barracuda fastback. Please ensure that these are right for your application!! Maroon coat hook - $5.00 Left shoulder belt clip, some surface rust(screws in under visor)- $10.00...

I am selling my rear bumper off my cuda.... It has a ding in it where it got hit, but otherwise the chrome is pretty darn good. Here is the link to the CL ad... it is located in Concord, Ca. 94520 http://sfbay.craigslist.org/eby/pts/4770192520.html I am asking $70 (new they are...

We are having a blowout sale on all leftover parts!!!!!!!! APRIL 27th/28TH 10am-4PM Ford, Chevy, Mopar!!!!!!(Yes we all have friends with brand X...) No reasonable offer refused. We need to get rid of it all!!!!!!!!!!!!!! 3906 Adeline St. Emeryville, Ca. 94608 PM for details...

Still looking for an early style throttle cable bracket for my 66 dart 273 4 barrel project.... Anyone have one they want to sell?

I just got a new cam setup for my 360. I got the comp cam 231-4... 282/290 adv. duration, 244/252 @ .050 Lift is .520/.540 yet I have 1.6 rockers on intake 1.5 rockers on exhaust.... so that makes lift .553/.540. I am also getting my converter built to match this. It will be a 9.5" with a...

These are spoof decals that look legit enough to fool most even at car shows, yet have the wording the factory should've put on there!!! Limited run... $17.95 shipped!!! There are 2 to choose from. One is timed for 14* BTDC, the other at 17*BTDC, both have idle speed at 900 in neutral...

I am selling a complete 8 3/4 rear axle assembly removed from a 68 Charger. I am advertising on here since A body ones are hard to come by, people have taken these and modified them to fit. A bodies spring perches are 43" center to center and B bodies are 44". Most leave these alone and...

I am looking to convert my 66 wagon to a factory 4 bbl. I believe I need a longer trans kickdown rod that goes from the bellcrank to the carb. I have the intake coming, have access to the correct carb, and waiting to hear on the throttle cable bracket. Any leads on any conversion parts...

Looking for a set of 66' correct Commando style valve covers. Finished or not. They should have pipes on both valve covers. Please let me know what you have. Thanks!!!

I have a blue Mopar shipping crate that has a metal cradle bolted in it that accepts small blocks. It may take a big block, but not sure. I would prefer local pickup, but if you want it shipped to you, the dimensions are: Overall outside dimensions are 40"L x 27"W x 30"H. Shipped from...

I am selling fully restored floor shift column pieces for 68-69 A body cars(ignition was still on dash). This will work for 67 but is not correct. This is for anyone who wants to do a factory look floor shift conversion, auto or manual. It includes outer column tube, instrument cluster mount...

National Cruise Night is tomorrow 8/25/12 in San Mateo. We meet up at Sparky's Hot Rod Garage, and then cruise El Camino Real!! Last year about 250-300 cars were cruisin!! People lined the streets! If your on Facebook, just type in "National Cruise Nite", and it should pop up. Also got...

I am selling a blue engine crate that holds a small block long block. It has a stand already inside it that bolts to the oil pan rail. I am asking $120 FIRM, local pickup unless you can figure a way to get a 40lb. container from 94608 area code. I am located in the SF bay are, in the east...

I am selling a used floor shifter from a 65 A body. IT has no console, and ONLY a park cable. If you need a shift cable I can get one made, but we can discuss this if needed. Asking $40. Shipping from zipcode 94608 SF Bay Area. Shipping will run about $10-15 depending where you are. I...

I am selling USED set of MP HD rocker arms. They come with shafts, spacers, and pushrods. This setup was in a 360 w/eddy heads. These components all work just fine, I just switched to adjustable rockers. They have about 7-10,000 miles on them. They are on Ebay with a starting price of...

I have a set of SBP 8 3/4" axle shafts. They still have tapered roller bearings on them with the factory adjuster. They have all lugs installed. $75 for the pair. Shipping from 94608, which is the SF Bay Area. The box will weigh in about 40lbs. so you can do the math on UPS.com for...

I have a front and rear set of sway bars for A bodies. A customer canceled his appt. after I had purchased them. They are NEW IN BOX NEVER EVEN OPENED. These bars are the best fitting and best ones I have ever installed on any Mopar. The front (part #55906) is for 67-72 A bodies. It is a...

I was lucky and honored to be invited to put my cuda in the SF Auto Show at the Moscone Center. U am the only Plymouth, but there is a cool 70 Dodge A100 van. Even heard "what kind of car is that?" and "Plymouth....whats that?".... I will post a pic as soon as I can....

I am in search of a bolt on timing tab used on slant 6's from 60-67. 68 and up had a welded tab and a different balancer. Please let me know if you have one. Thanks!! I am located in SF bay area for shipping quotes. Zip 94608.