Search results for query: *

Do you have any pics avail.? Where you located

Spring is here and the car will be coming out soon. Still needing all the parts for this conversion. Black preferred

any pics?

Well, so far so good. Replaced the Orange Box with on from Napa and it's still running. Thanks to all for the suggestions. Cheers.

I have switched to electronic many moon ago but I will re-check. I took the dist. cap off and all looks good.

No I don't leave the key, it's either running or the keys are out. I just ordered another coil and a new module through napa prolink so i will get them on tomorrow after work and keep you posted. I have a feeling it's the module, I can't see two coils (one brand new) failing with 15 mins. drive...

mopar box #P4120505, Accel coil #8140c, an Echlin (NAPA) resistor ICR11

I am using a 2 terminal resistor and using an Accel cylindrical coil. The one that quit the other day had been used since the electronic conversion with no issue, hence no hesitation replacing it

So the other day I was out for a drive and stooped at a buddies for a visit. Went to leave but the car wouldn't start, no spark. Replaced the coil and it started. Just put an electric fuel pump on it today, went to start but no park AGAIN!? It has the Mopar Orange Box that it several years old...

bump

I am looking to put power steering in my 70 Duster so I need the column and pump brackets. Live in Ontario but have access to a shipping depot in Michigan

You ship to Canada USPS?

how much to ship the column to Ontario?

not yet but it will be now lol

Hello everyone, let me introduce myself, I am moron. So as it turns out I had my 9 year old help bleed the brakes when I was finished this job and I totally forgot how much kids like switches. Yes, I have a roll control valve and the switch for it was inviting to those little fingers. It is...

I took the master off and everything was lined up. I put a pick in the line hole and it felt resistance. So my guess is i was given the wrong master. I guess a trip to Napa in the A.M.

So if I take the line off the master that feeds the front and shove a nail or dental pick in it to rupture the valve i might be good? Everything worked prior to putting the disc parts on.

I got a master that was supposed to work but it didn't look any different which made me think of it being the issue. Is there an easy way to tell the difference between a drum/drum and a disc/drum master? Out of curiousity what makes them different? If I jack the front up the wheels turn but...

I just changed my 70 duster drums to a 73 duster set-up. All went fairly well until I took it down the road. My front tires are squealing, seems the calipers are holding on. The calipers, pads, UBJ, LBJ, and flex lines are all new. Is it possible the master cyl is wrong not allowing enough...

You ship to Canada?

What's it out of and do you ship to Canada?

Just checking to see if it's sold. If not do you ship to Canada?

Thanks all for the advice. I was replacing the pump because I had the oil pan off and figured it may aswell be replaced too. As it turns out, the replacment pump wasn't machined properly so it didnt seat properly in the bearing cap and put too much pressure on it causing the crack. I ended up...

Hello all!!! I replaced the oil pump in my 340 and I noticed a hair line crack where the oil pump drive shaft comes through the main bearing cap. Anyone else had this happen? If so is it normal and can I leave it or do I yank the engine, get a different cap and have it line bored? Thanks in...

is there an advantage to mounting the caliper on the front vs. the rear? also steel piston or Phenolic Piston

Thanks for the quick responses guy's. I will order the goods and get this girl running again!!!

thanks hemi, looks like they are the single piston style. Is this the better of the 2?

OK here are some pics

thats the reason for this thread. I am trying to find out what calipers and rotors I nees to order. Is there something to measure or pics to identify which ones I have? I bought them at a swap meet from a lady who's husband stepped away from the booth and she didn't know. There were too many...

I recently found a set of spindles with upper control arms to put disc brakes on my 70 duster BUT they didn't come with the hubs, rotors, or calipers. Seemed like a good deal at the time of purchase but now I don't know what calipers or size of rotors I need. Also, will I need to find different...