Search results for query: *

OK I am needing a pair of matching tunnel ram carbs! Holley 450 mechanical secondaries or vacum secondaries! Anybody got a pair laying around they are not using and want to sell! I would even look at a pair of 600 or 650 maybe.Needing rebuilt is OK just want complete carbs with no parts...

I need a good useable set of 340 pistons for a .040 overbore! Prefer with a dome but will consider any! 1967 - 69 Dodge Dart steel Hood (CLOSE TO HOUSTON FOR SHIPPING REASONS) Dodge Dart Front Bench seat for 2 door car(CLOSE TO HOUSTON) Rear engine plate for a smallblock

I am installing my new linkage on my 69 Dart A body trans and it is not working out correctly.I think I may have the wron Hurst mounting plate.Does anyone know the correct Part# or #'s to the mounting plates for a 69 A Body. Also where can I purchase the correct one if mine is wrong! The one I...

OK here I go again! I need the following items so I can get my project completed! small block fenderwell headers for a 67 - 69 dart dual quad intake for a 340 (prefer low profile but I ain't picky at this point trying to make my own crossram setup!) Bench seat located not far from...

I made a purchase of a smallblock mopar tunnelram setup from a William Jones in Laurinburg NC..I paid through Paypal back on Feb 7th I have tried to contact the seller William Jones and he will not e mail me or contact PayPal.The last e mail I got from Mr. Jones he said he shipped the package...

OK I have decided to paint my engine in my 69 Dart swinger BLUE! I want to get as close to as factory original as I can. Where is the best place to purchase the paint and or brand of paint to use. Anybody got any information on this I sure would appreciate it. Also what color would the...

A young boy age 9 was sitting on the curb and looking at a clear jar of liquid sealed tight with a lid. Then a Preist walked up and asked Little Tommy what do you have there! Tommy replied Father I have a Jar of the most Powerful Liquid in the World! The Preist says well Tommy do you have a jar...

Need a set of ceramic coated TTI headers for a 69 Dart with a 340 Four speed with Milodon oil pan ! USED IF IN REAL GOOD CONDITION OR NEW! Also need a LOW RISE Dual Quad intake manifold for a 340!

I am getting ready to paint my new engine and was wanting to see a picture of a 67 -69 dart with a torquise or blue 340. I just want to see how the colors go together. I know hemi Orange would look good but I understand originally they were the blue color and I woul like to go back original if...

We need more people like this Man Running OUR COUNTRY! I copied this from another site for all here to read! SHERIFF JOE IS AT IT AGAIN! Update on Joe Arpaio Maricopa County was spending approx. $18 million dollars a year on stray animals, like cats and dogs. Sheriff Joe...

I ran across a add on e bay for a 2X4 intake manifold for a smallblock. During reading the description the seller states the manifold only fits like 64 -65 273 engines only. I thought all LA engines werebasically the same and heads,intakes etc would interchange. I do not understand what the...

I have ran across a 1974 Scamp,slant six,auto,A/C, Power steering,power disc brakes,map light,trunk light,white vinyl top original and EXCELLENT,All interior original an a 9 on a scale of 1 to 10 and it is Bone color and the car is a greenish gold,new tires,original hubcaps,trunk is Immaculate...

A friend of mine is building a 73 Dodge Dart and he is in need of a rear fiberglass bumper,need some leads on the best ones and who sells them.T Thanks Bobby

Just to let you guys know! "Rumblefish360" is a real stand up guy.I bought some parts from him at a very reasonable price and he threw some other items In I needed for free just to help me out! Sorry It has taken me a week or so to get this on the site but I was real busy with the holidays and...

I am looking at buying a 1994 dodge Dakota with a V6 automatic with 74000 miles.I am looking to swap the V6 for a 340 I have sitting in the garage.Has anyone done this and is it very difficult to do it. Any pointers as to what I will have to go through to do this swap. Any input appreciated.I...

What is the exact bore size for a 340 bored .040

Still looking for a ste of 67-69 smallblock fenderwell headers,needin some repairs is OK! Also need a set of 340 pistons .040 over in size prefer 12.0 compression but will consider smaller or maybe 13.0 depends on what POPS UP! LOL If you got em e mail me,If not I have to order a new set and I...

I need a set of 340 forged pistons .040 over,also need a good "FORGED" 340 crankshaft,a set of A body fenderwell headers even if they need some repairs is not a problem or maybe even a KIT or set of weld up headers.I have seen a couple of these but didn't pursue them.I need these items for a...

Anybody out there got a set of old fenderwell headers for a smallblock dart! Somebody must have an old set laying around somewhere! I don't care if they need a little repair ! I NEED A SET BAD FOR MY 67 DART GASSER PROJECT! PLEASE if you have some you are not going to use I will buy them! May...

I need a set of smallblock fenderwell headers for a 67 Dart Gasser Project!Anthing out there! I don't expect new or perfect! Good useable is fine! Thanks Bobby

OK I need some expert help here.I am going to be installing a new 416 engine in my 69 Dart Swinger 340 soon.I am not fond of headers and I prefer stock type cast iron exhaust manifolds.I have been told by a couple of guys that the magnum exhaust manifolds will fit a 340.I am going to be running...

I need a nice A body roller.NO RUST or very minimum!I want to build a little A body for my Grandson.I have a nice stock 340 and 727 to install.Only looking for NICE and within 250 miles from Houston Texas! E mail me pictures and prices of what you have please! Thanks Bobby Dodson...

I am needing a set of forged .040 pistons for a 340 mopar.Anything from 10.5 to 1 compression to 12.5 to 1 compression.Let me know what you have and shipping to 77365 Texas! So if you have a set laying around and don't need them then turn them into CASH! Also lookin for the following 340...

sorry double post!

My soninlaw is using the HIPO exhaust manifolds on his 69 Dart 340 Swinger. Not sure if they are the 69 model or what but he is needing to know if there is a place to buy the stock style head pipes or does he have to have them custom made.From looking there is not much room in there for error...

I need a stationary crossmember for a 67-69 A Body.This is the piece that the removable cross member bolts to.My 67 Dart Gasser project has one but it has some rust in it so I would rather replace than repair.Also need rear floor pans.Mine have some rust in the lower recessed piece. Thanks...

NEED a set of 340 Fenderwell headers for a 67 Dart,used is fine I am building an OLD GASSER car and need a set. Thanks Bobby

What do you guys consider to be the best small block mopar balancer on the market.I am ready to buy one for my 416 smallblock build up with internal balance.What are you guys running.This is going to be a street driven car and may see a track a couple of times just to see what it will turn but...

I am considering a MI Single plane intake for my new 416 engine.But from the looks of them they are going to be too tall to clear the stock hood.Is there anyone using this intake in a 67 - 69 Dart,If so are you experiencing hood clearance problems with a air cleaner on . Any help on this will...

We are getting ready to install the new engine and 4 speed in one of the darts and my soninlaw noticed that the 4 speed trans mount looks pretty worn.So I started looking for a new one.Only thing I found that looks like what we have is from Frederick dodge for a challenger.Not able to find one...