Bill:
It appears that Chrysler offered the Saginaw pump on Small blocks that had the cast iron WP from 1967 to 1969. I will check out a local yard and let you know if I have any luck w/ brackets. It wasn't a common option in the day because only girls had PS. On the other hand, if you change...
Hi,
I'm having the same problem. I bought a new Borgeson PS box and Saginaw pump from a junk yard 318. I also bought hoses and an expensive coupler for the combination. I need brackets. Did you find any that would fit the Saginaw to the 273 in my 64 dodge dart?
Thanks,
Jim Walsh
It's been a while since I saw it, and it's hard to get to. If it came off an early A body V8, it should fit.
How much do want for it with freight to Webster, NY 14580.
Thanks,
Jim Walsh
Hi:
I just need the drivers side. I bought one before but the trim came to a peak on the top. The correct one is flat across the top. If that is the one you have, contact me at [email protected].
Thanks,
Jim Walsh
I need the 9" trim piece that goes on the left rear corner (intersection) of the convertible top, top fender molding and side trim. It slides into the molding that comes across the fender top from the rear over the tail light.
Thanks,
Jim
Jake:
I'm looking for a"Z" bar for my 64 dart 273 3 speed on the tree. Do you still have the parts listed? If so how much for the clutch Z bar?
Jim Walsh
Hi:
I need the corner trim pieces by the rear window on the rear deck for a '64 270 conv. These connect the stainless strips that contain the snaps at the base of the top. I also need one of the 9" Stainless pieces that go down the rear fender.
I think the 63 and 64 pieces are the same. I can...