64 Dart 270 conv. trim needed

[Jim Walsh]

I need the 9" trim piece that goes on the left rear corner (intersection) of the convertible top, top fender molding and side trim. It slides into the molding that comes across the fender top from the rear over the tail light.
Thanks,
Jim

 

[64Conv8]

I need the 9" trim piece that goes on the left rear corner (intersection) of the convertible top, top fender molding and side trim. It slides into the molding that comes across the fender top from the rear over the tail light.
Thanks,
Jim

Hi, I have a set of the 9" pieces I think u r looking for...each has a fixable dent in them but the chrome is very good...I have 2 64 Convertibles and these are my spare spares...keeping one set 4 me....$17.00 + $3.00 shipping...fyi..I have a + 1200 on e bay..

 

[Jim Walsh]

Hi:
I just need the drivers side. I bought one before but the trim came to a peak on the top. The correct one is flat across the top. If that is the one you have, contact me at [email protected].
Thanks,

Jim Walsh