Search results for query: *

HI, you posted thread "70 Duster Eagle Hemi Swap, No Spark!" I have similar case in my car, how did your sorted out?

There may be something wrong at loom connections or wire missing, but not quite possible at installing connections, there were not much to connect on manual car :D Fuel pump feed, battery, ground, acc and fans power and relay ground. That was it. But power stays on ecu and coils/injectors in...

Yes i have, i had that problem with previous engine management, and installed indivudual starting push button then for temperaly solution. So yes, i have power for injectors and coils when ignition on, when starting and when keep starting longer period. And tested that also with 60w test bulb...

Bumb for this thread. having same issue. Did this get sorted out? So my situation. No ground pulse to coils, and i DO got injector pulse, +12v feed ok to both when turning ignition on and when starting. No fault codes expect than from IAT and when cranking bit longer, high voltage from o2...

I Have 2005-2006 Jeep WK manual also, but that dont have 6.1, it came production 2007 if i´ve understand correctly.

Any idea where to find complete 6.1 engine related wiring diagram, and my engine is from 2007 Jeep Grand Cherokee SRT but pretty much any 6.1 will do cause im not using Mopar ecu anyway. And since someone asks it anyway in first post ;) Ecu im using is Finnish Tatech ->...

Width was basically exactly same that torsion bars width, there were about 2mm gap to torsion bars on both sides

I got those D4477-R Clears nicely with fast ratio steering, Not sure yet, but i also think that will also clear with stock small block starter. Not clear so nicely with original steering box, engine will need to sit quite high, tight fit with that. Mine milodon pan is bit over...

Any new info on these? Anyone that has mount these on 6.1?

So, just to make sure... LS1 T56 has 8.25" bell depth Challenger TR6060 has 7.3" bell depth Bells can be swapped to each other http://www.moparpartsoverstock.com/p/__/HOUSING-Clutch/6890646/68061184AA.html Mopar oem bell is quite reasonably priced. Anyone has used that on 3gen...