Search results for query: *

I've worn out the search bar to the point where I'm seeing the same posts over and over, not finding much chatter about this issue, so it's safe to say I messed up somewhere. 318 w/ vac advance, eddy 1406, mild cam with original springs, headers, 2.5" exhaust w/ mufflers, 727, 3.73 rear...

I feel like I've been spending too much time on this sight lately. Short story: my car is riding too low and it's causing issues with clearance everywhere. When I put together the 8.8, I used taller perches to lower the car with stock springs. Installed hotchkis springs and they lowered...

My apologies if this has been discussed. I might not have been using the right key words in my searches. So i'm hearing 2 distinct sounds coming from under the car when I'm accelerating at anything more than feather-light throttle. Sound: 1) imaging a heavy wood table being pulled...

Does anyone know what wheel manufacturers offer offsets that compliment our old Mopars? Especially in the 17-18 inch category.

1974 Duster 318 15lbs vacuum Power brakes MC front disc rear drum Factory front rotors 8.8 Ford rotors in back the car stops but pedal is near the floor before I see any stopping power. Is this a simple MC swap or will I need more gear?

Had a crappy 7.25 rear end in my duster and grenade it last night doing burnouts. I have an A-body 8.75 housing and 2 center sections at home that both need completely rebuilt. one is a 741 and the other is 489. whats the difference between these center sections? which is better for...

http://shiftsst.com/blog/122-automatic apparently these guys bought keisler. they carry everything keisler carried. does anyone have any experience with these guys??

Im in the market for new T bars and shocks. Occasional autox. I'm in the air between the firm feel 1.12 and 1.18 bars. and this leads me to a question. The larger the T bar, the greater the spring rate. when I change T bars, what values or properties in my shocks should I address.

Hey everyone, thanks in advance for your help. First off lets get the basics out of the way. I have a 1974 318, basically stock as far as I know. It does have a very mild cam, but I have NO other information on duration or lift. heck i don't even know the brand. :banghead: Behind the 318...

I am looking for a grill that is damaged, I would prefer the outer frame to be in tack, or at minimum have the frame pieces. The inside isn't dire important. I want to attempt to design a grill for our cars but don't want to chop mine up. THANK YOU!

How rare are they?

4, 5, or 6 speed tranny needed. And everything to convert from an auto

72 Valiant. /6 runs nice Automatic shifts nice I am taking the hood grill and bumpers. The rest is parts car for a month or so before I take her to the graveyard.

Has anyone seen the duster to demon conversion with a 67-69 dart front end???

Crazy idea. I like the torsion bar set up on my duster. To the point of saying I don't see the need for a coil front. That being said my mind is focusing on rear suspension now. And I find myself thing, if I don't want/need a coil front end, why replace the leafs with a coil rear??? Now this...

does anyone know how many degrees of camber are lost per inch of torsion bar drop? and how much can you drop the front end of a duster and still achieve proper camber with a stock uca

I've got this gremlin. a rear end gremlin. or I think it is anyhow. I have a 318 with a 727 and 7 1/4 rear end with limited slip. recently I've had this issue when taking off, my car wants to rev up and not be in a hurry to go anywhere. I originally thought this to be an issue...

Alright fellow mopar nuts. is it just because I have a duster, or are the 70's nova's just plain ugly???? I don't get it, I really don't. why on earth are Nova's more popular than Dusters? Is it because there are more inbred people in the world than originally thought? Is it because...

my 74 duster has been restored for some 13 years now. I have never hooked up the lines to the heater core since I only drove the car when warm. I use to not drive the car on cool mornings, but enough with that, time to hook it up. Since I have not put antifreeze to the HC in a number of...

saw this on ebay today. here's the link Plymouth Duster Custom Restomod Mopar Big Block 430 Horse Power | eBay

I was posting under another thread and the point of that thread changed, so I decided to create a new thread. Does anyone run a track bar on their rear end? if so what changes did it produce? and pics!

I shot hemi denny a question regarding this, but thought I would let everyone throw their two cents in. I was wondering if it would be possible to run a coil over set up with the stock k member..... Say you beefed up the K and fabricated LCA and UCA's to accept the set up. then went with...

Okay, so I want to do more work on my car! the car has been restored for something like 13 years now, and still looks purty good. Okay so no problem, right? WRONG. My beautiful and patient wife wants me to get rid of another project before I turn my Duster back into one. so what needs to...

I have a 8.75 rear end that came out of a car that was in a house fire. The housing is fine. I am going to get new axles, but was wondering what needs to be replaced in the pumpkin. It has a 3.23 sure grip which I wouldn't mind keeping.

Ok I have never noticed this before, but I took the cover of my 74 duster last night and noticed the driver side tire is within an inch of the front of the wheel well and has about 4-5 inches of space behind. The passenger side looks normal. I don't recall and pulling while driving last summer...

Hey i have i TCI streetfighter 727 (ugh...) i would love to put a manual in but i don't really want to cut the floorpan. How hard would it be to install a ratchet shift instead? would i have to change the valvebody?

Ok guys, I aquired this 340 a while back and I am now thinking about droppin the mill in my Duster. BUT...i don't know a whole lot when it comes to engines, and was curious if you guys can help me out here. Can anyone look at these pictures and give me any information they can squeeze out of them.

How much do you think this suspension has been lowered? AND Are those 17" or 18" rims?

Hey everyone. I'm a newbie....there is a picture that I found on the internet of an extremely cool looking Duster. I have only seen the one picture and I was wondering if anyone has seen this car before?

Hey everyone! I've been catting around in the shadows long enough, and thought I should officially become a member and partake along with all of you on FABO! Me: I will be 30 this summer, I have a wife and a daughter. I am an electrician, I can't leave anything "original", and I enjoy...