Search results for query: *

235/60 drag radials will hook it

I put the MOPAR on the side so no one would ask if it's a Vega. Someone did. I get asked if it has a Mopar motor once in a while

Hard to beat a low deck. ran a 451 for 11 years running a 499 now

I've got A .550 roller in a bone stock 69 2barrel 383 with 2.14 intakes. over .100 valve clearance

drilling out the holes in the rim is much better then grinding the nuts. Since the nuts do the centering unlike a stock wheel that has a center register to center it. A 11/16 reamer would be better if you have access to one

400 block. stock crank?

I saw you trailering the duster through Walnut Cove a few weeks ago

I live 20 minutes from there

leave the back solid. I've been 145 with mine it is the bolt on style

go with the 8 pt. points 7 and 8 are small bars that run from the main hoop down to the sub frame. Keeps the bar from collapsing sideways

heat the meats

18 pounds of air should be good in those tires

:thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup:

Have you ever "driven" the finish line in a 1/8 mile race? I've ran both. Don't understand the 1/8 mile bashing on here.Personally I don't pay to see any drag racing....I DO IT!

Did they make Toyotas in 1954?

Stop by and say hey

????

this is the street car. It's been down the track a lot too.

I don't think I put this on yet

radials are faster then slicks.Don't run more tire than you need. I have picked up .02-.03 with 11lbs less tire on the back.That is a car that's been 5.82 in the 1/8.slower cars should see better gains with lighter tires.

the converter is too loose. Putting a 3.23 gear in will make it a lot looser.

2" TTI no pipes

flat top Ross "346" heads

Had a 451 low deck in a Dart. 10.3 CR Bill Miller rods Stock heads with 2.14 intakes .600 roller Performer Rpm 750 carb. 9.5" con. 3.91 gear 28 in tire 3400 lbs 10.90@122

had a set of the tri-y's on the street dart. 451 low deck .600 roller cam. would not run at full throttle. ran high 11's. put on 2" tti 10.88. #3400 3.91 gear

Agree..... '24 would be the smallest I would want. I love my '28 work bench in front. Room for a Dart and A golf cart end to end.

Been a mopar guy my whole life. Been rac'n since 2000. I am pretty new to the whole computer communicating thing. My wife has a '69 dart with a 383. I have a bach halved '69 dart with a 499 low deck

Hope to see some good topics