Search results for query: *

Looking for a pair of TTI 2" to 3.5" collector headers; part number 440-200 or similar. Let me know what you got I'm just looking to upgrade from the Schumacher's currently in my car. PM me or comment on the thread and let me know what you got. Thank you!

So I finished my 727 tranny rebuild and it's time for a torque converter. The car will have a 440 stroker with a 3.23 rear end and 27.5 inch tires. The cams specs are 226 duration and .47 valve lift. When I typed this into a engine rpm it said my cruise rpm at 60 mph would be about 2368 rpm. So...

I didn't receive any thrust washers. I have connections to a guy who works on transmissions so I'll ask him to press in all new bushings as they are pretty cheap insurance. I don't plan to touch the springs in the front clutch as I don't have the tool and they all look fine. The kit didn't...

I ordered the A&A overhaul kit and other parts previously mentioned. My concern after receiving these parts today is that the A&A kit didn't come with bushings. Now my bushings in the transmission all looked fine but I just want to check that worn bushings won't cause catastrophic damage down...

These look good but I read that if I replace my sprag I would be best off spending double on a 16 roller sprag. Is this true or can I really use that 12 roller?

Ok one last question. I know I've been shifting back and forth forever, but I think I've found the sprag I want. Any thoughts on the coan racing super sprag? I'm looking at this sprag because it isn't a 6 bolt, only a 4 bolt. The A&A looks like I may need a tool to drill out the holes. I'm...

Sorry I didn't make that clear. I do plan to replace the sprag but I don't plan on installing a 6 bolt sprag. The 4 bolt 12 roller sprag I linked previously is the one I plan to use. However TCI seems to have discontinued this sprag. If I can't find a TCI sprag I thought I read you can drill...

I do plan on doing the rebuild. I'll try to find a rebuild book as the one suggested does look helpful. I've been doing a couple hours every night of research and planning for this build so I hope for it to go smoothly. I have completely disassembled the tranny and I'm now looking to buy a...

I'm looking to buy an aluminum radiator with a built in transmission cooler. I assume this will cover my tranny cooling needs. So I called A&A and they gave me a list of parts that I plan to order. This includes A&A's 16 roller sprag, transgo tf-2 shift kit, heavy duty band strut, 4.2 second...

Sorry I should have added the 440 is around 500hp(my best guess) not to far off 450hp. I'm building it now with a stroker kit and 440 source aluminum heads and cam around purple shaft specs. I'll skip the manual valve body. Thoughts on a sprag? I fear destroying stuff:) I might end up calling...

Hey all, New to this site because I'm approaching new ground. Never done much to a transmission but I think it's time. I'm dropping a 440 in my car soon and I need my torqueflight 727 to hold up. I've read around and I've heard I'll need a 16 roller sprag along with a valve body and rebuild kit...