Search results for query: *

I have a 904 to an 8.75 any one have the length I need, also how far should the yoke go into the tail shaft. Should I be able to see any of the yoke shaft after the drive shaft is mounted. I have to take off 2 of the bearing caps on the u-joint, push the shaft into the tail shaft as far as it...

I have a 1974 duster and went to get a front end alignment but was turned away because my pitman arm is missing 2 washers. 1 top and 1 on bottom of the mount, Are these a special size (thickness) ? I went to Mancinis and the new moog part did not come with the washers. What size do I need for a...

Looking for an inner rear bumper for a 1974 duster Thanks

How do you to tell the difference from a 904 to a 999 - 998 externally by just looking at them lying on the floor, or is this not possible with out a tear down?

1974 duster, I am replacing my 318 with a 360. the 360 will be .040 over on the bores. ISKY 280- Mega Hyd. cam. I am running a 391 gear and here is my problem. I am running a 904 ( stock ) with a shift kit. Should I buy a 2500 stall for the 904 or go with a 727. 904 is in good shape and I am not...

I had a trans shop hook up the kick down linkage as well as the throttle cable. Well tonight my friend suggested to look at the throttle pull off the peddle and its only pulls it 45% the two back barrels don't come close to opening. I have locar cables to the carb, I can't see that shorting them...

At an idle my volt gage reads to the negative a bit but when I increase the idle the volt reading goes positive, am I not charging correctly? Belt is tight and no slipping.

Everything is new but I am not charging again. I must have a wire problem, does anyone know where to find a simple wiring diagram so I can clean this mess up. 318 car

I have a stock 318 with 360j heads and a small cam. Carb is a holly 650 vacuum secondary electronic choke. Edelbrock performer intake. The car idles great in park but when I drop it in gear the idle drops and she shakes and wants to die, it also smells of gas. While in park I do not get the gas...

Sitting at the light it just shut off and the key would not even click the starter. I went to the starter relay and it cranks from their but no spark? I have no interior lights or head lights? Nothing in interior works and no spark but I can jump it from relay but still no spark. I changed the...

I am asking this for a friend who owns a 73 duster with a 440, Indy heads with two 890 demon carbs. Custom large tube headers going to two 4inch race magnums. sez its just too loud to run at night (poor neighbors) he is looking for the quietest best performance 4inch muffler. Thanks

I have has slop in the steering gear on my 1974 duster. All other parts have been replaced with moog. The tech that did my front end alignment said I have slop and I am woundering if that nut on top of the steering gear is some kind of adjustment and how to adjust it if anyone knows PLEASE tell...

My 904 was rebuilt and a shift kit put in. I have reverse but no drive. I only installed the unit, some one else rebuilt it. Anyone with an idea what is wrong?