Search results for query: *

15x7 255x60x15 26x6x15

Just put on 15x7 rims 4in backspace with 0 offset 255x60x15 M/T 27 in tall 10 in wide and 26x6x15 fronts. Stock spring location

I found out that 15x7 weld wheels not only have a 4.5 backspace but have a +13mm offset

Thanks 19DART66

I went with vision 15x7 rims with a 0 offset and 4in back space with M/T 255/60/15 which are approximately 27in tall and 10in wide which has 1in between tire and spring and it's tight between tire and fender lip I do have 6 leaf springs with a 3in lift and stock shackles and stock leaf spring...

Yes they do l put a little sealant on all of them

I agree It's a whole lot cheaper to pull the pan then to replace the motor

But how would you know if it's in the pan?

Welcome aboard Here's a couple of pics of my 64 for maybe some ideas

I just found some 15/7 rims with 4in bs and 0 offset. They are vision rims, going to try and get info on them to see if they are any good

Thanks toolmanmike I'm so close. I just have not been able to find a 15/7 with at least a 4 plus backspace and 0 offset other than the Cragers without having a custom set made

I was hoping they would work I have M/T E/T Street S/S 255/60/15 on 15/7 US MAGS with 3.80 back space and -5 offset and have 1in from the tire to the spring but maybe 1/8 in clearance from tire to fender lip Thanks 19DART66

Would a 15/8 with a 4 1/2 bs and 0 offset and 255/60/15 work? I do have 6 leaf springs with 3in lift

Here are some pics

Thanks TXOval for the info Right now I mocked up a M/T 255/60/15 on a US mag 15/7 with a 5 on 4 bolt pattern with 3.80 back space and 5mm negative offset and have about 1/8in clearance between fattest part of the tire side wall and 1in between tire and spring everything is stock except for the...

This is my mopar tow rig

Thanks toolmanmike

Hi can you give me some info on your rims make bolt pattern offset thanks

Thanks so much for the info and especially the pic That helps a lot

The new rims will be 15/7 with 3.75 backspace with a .5 offset

Shows approximately 3/4in

It's not so much of wanting an 8in rim, it's what is available for me in a 5 on 4 bolt pattern. Found some 15in rims that size, wasn't looking to swap out axles at this time. Choices are getting harder every day with older vehicles lol Just like me

But will that fit using a 15/8 rim with a 4.50 backspace and 0 offset? The rim on there right now is a 14/7 with a 4in backspace and 0 offset

It looks like it might work, inside fender well is 11in From inside to fender inside lip

Those are all great looking, but looking to mini tub or offset springs at this time

Thanks toolmanmike just want to do the rears

Right now I have 14/7 with 4in backspace and 0 offset

I have a 64 barrcuda with 8 3/4 rear end, 6 leaf springs 3in lift, stock spring location and stock shackles. I'm looking to put 255/60/15 tires on 15x8 rims with a 4.50 backspace and 0 offset, do you think they will fit without any modifications? Right now I have 225/70/14. Thanks all for your...